IFIXIT Palm Treo Pro Battery Replacement Installation Guide

IFIXIT Palm Treo Pro Battery Replacement Installation Guide

INTRODUCTION

In this guide you will learn how to install a battery into your Palm Treo Pro.

PARTS:

Palm Treo Pro Battery (1)

Step 1 — Battery

• Press down on the back of the case and slide forward to remove it.

Step 2

• If a battery is already installed, remove it by pulling up on the tab near the camera lens.
• Insert the new battery into the open slot. Make sure the battery is oriented so that the Palm logo is in the upper-left corner opposite the camera lens.

To reassemble your device, follow these instructions in reverse order.

www.iFixit.com

References

• iFixit: The Free Repair Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>