BARKBATH™ System Bathing Video
- June 7, 2024
- Bissell
Table of Contents
Hi I’m Dave Hachey, and for over a decade the pet bathing stores that I
founded have bathed over seventy five thousand dogs using the same technique
that inspired the BISSELL BARKBATH™.
So, now I’m going to go through the simple steps involved in bathing your dog
with the BARKBATH™ so that you and your dog can have the best experience
possible.
- Start off by placing the microfiber mat on the floor where you’re going to bathe your dog.
- Then put your primed BARKBATH™ on top of the mat
- Next, lay down a mat or towel for your dog
- Now plug in the unit, and press the power switch to the on position
- Set the rinse shampoo switch to shampoo to dispense a mixture of shampoo and water
- When your dog is on top of the mat or towels test the water to be sure it’s warm
- Then hold the spray nozzle directly on the coat and while pressing and holding down the trigger gently stroke downwards following the natural fall of your dog’s coat
- For optimal cleaning keep the nozzle flat on the skin
- Then by releasing the spray trigger, use drying strokes to suction up any moisture and continue as needed
- The BISSELL BARKBATH™ is ideal for bathing your entire dog, even those hard-to-reach areas
- You can spray some solution on the included microfiber towel and hand clean delicate areas such as your dog’s face
- Let your clean dog air dry or towel dry as needed
- For best results use our Furget It brush to remove unwanted loose hair from the coat
bw3j1Z3sLEY
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>