BARKBATH™ Dual Use, Bathing Your Dog | Support

• Remove clean water tank & pet shampoo tank

  • Fill clean water tank with warm water

    • Test the temperature of water before using BARKBATH Dual on dog

  • Add BISSELL No-Rinse Dog Shampoo to pet shampoo tank

  • Replace pet shampoo tank first, then clean water tank

  • Choose the spray nozzle and grooming clip that is best for your dog and place it on bathing tool

    • The BarkBath comes with 3 grooming clips, and 3 spray nozzles

  • Place microfiber mat on floor with BARKBATH Dual on top

    • This will help dampen the sound for your dog

  • Place another towel on the ground about 4 feet away for your dog

    • This will help further reduce the sound

  • Plug the machine in and turn it on

  • Prime machine by holding trigger and spraying onto microfiber pad for 10-15 seconds

  • Place nozzle flush against your dog’s body, pulling the spray trigger and pulling in a downward motion

    • Remember to wipe hair off grooming clip & spray nozzle throughout bathing your dog

  • Release the trigger and lift away after each pass

  • Make a few drying passes on your dog to remove excess water

  • Continue until your dog is clean

  • If you want to use only water, flip the switch on your BARTHBATH to the rinse mode

  • To clean your dog’s face and paws spray a clean cloth and wipe your dogs face and paws

  • If you have any further questions about using the BARKBATH Dual Use, please Contact Us

  • Recipient Email

Your Email

Your Name

Was this answer helpful?

Yes
No

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>