My JetScrub Pet shuts off automatically | Support
- June 7, 2024
- Bissell
Table of Contents
-
Plug machine in
-
If LED lights on front of machine do not turn on refer to No Power Troubleshooting
-
Recline machine
-
Select cleaning mode
-
If machine turns off after a short time, unplug machine
-
Remove nozzle by grabbing both sides and pulling upwards
-
Take brush roll out by pulling up on brush roll tab
-
Clear hair wrap and debris from brush roll and brush roll ends
-
Hold colored pull tab on brush roll and spin other end
-
If brush doesn’t spin, a replacement needs to be ordered
-
Check plastic drive gear, (where brush roll is inserted on foot of machine) remove debris wrapped in this area
- Turn gear by hand
- If gear doesn’t turn, Contact Us
-
Reinstall brush roll by inserting right side into machine first, then press down tab on opposite side until secure
-
Reattach nozzle to machine
- Line up tabs on front edges of foot and then push window into place until it clicks
-
Plug machine in, recline, and choose a cleaning mode to test machine turns on and will run
- If your machine is still automatically shutting off, please Contact Us
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>