JBL Reflect Mini NC User Guide

June 7, 2024
JBL

logo

JBL Reflect Mini NC

product

WHAT’S IN THE BOX

box

APP

image

how to wear

wear

image 2

DUAL CONNECT + SYNC

image 3

image 4

Manual Controls

image 5

BUTTON COMMAND

image 6

  • Enable advance controls by connecting your JBL reflect mini NC to My JBL Headphones App .
  • ENABLE YOUR VOICE ASSISTANT THROUGH MY JBL HEADPHONES APP AND ASSIGN IT TO Y OUR PREFERRED EARBUD (L/R).

DO MORE WITH THE APP

image 7

Charging

image 8

image 9

TECH SPEC

Model: REFLECT MINI NC
Driver Size: 6 mm / 1/4” Dynamic Driver
Power supply: 5 V 1 A
Earpiece: 6.75 g / pc (13.5 g combined)
Charging case: 46 g
Headset battery type: Lithium-ion Battery (50 mA / 3.7 V)
Charging case battery type: Lithium-ion Battery (300 mA / 3.7 V)
Charging time : < 2 hrs from empty
Music playtime with BT on and ANC off: up to 7 hrs
Music playtime with BT on and ANC on: up to 6 hrs
Frequency Response: 20 Hz – 20 kHz
Impedance: 16 ohm
Sensitivity: 97 dB SPL @ 1kHz
Maximum SPL: 94 dB
Microphone sensitivity: -32 dBV / Pa @ 1 kHz
Bluetooth version : 5.1
Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power : < 10 dbm
Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-REMININCTWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during
product certification for head use is 0.1098W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between
the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF
exposure requirements and should be avoided.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates.
Alexa is not available in all languages and countries, Alexa features and functionality may vary by location. See www.amazon.com/alexa- availability for details.

logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals