SENCO FinishPro Micro Pinners Instructions
- June 7, 2024
- SENCO
Table of Contents
FinishPro® 23SXP
FinishPro® 23LXP
FinishPro® 21LXP
Micro Pinners
Operating Instructions
Senco Brands, Inc.
4270 Ivy Pointe Blvd.
Cincinnati, OH 45245
1-800-543-4596
www.senco.com
Warnings for the safe use of this tool are included in this manual.
NFD8F8L8M Nov. 5, 2013
© 2013 by Senco Brands, Inc.
EMPLOYER’S RESPONSIBILITIES
The employer must enforce compliance with the safety warnings and all other
instructions which accompany this tool as shipped from the manufacturer.
Keep this manual available for use by all people assigned to the use of this
tool.
For personal safety and proper operation of this tool, read and understand all
of these instructions carefully.
| SAFETY WARNINGS
---|---
| WARNING!
- Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS
|
- Use safety equipment.
Always wear ANSI Z87.1 safety glasses with permanently attached side shields.
Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Failure to do so could result in personal injury.
|
PERSONAL SAFETY
- Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tools while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
|
- EXPLOSION HAZARD Never uses tools in an explosive atmosphere or in the presence of combustible materials such as flammable liquids, gases, or dust.
|
- Never use oxygen, carbon dioxide, or any other bottled gas as a power source for this tool; the tool will explode and cause serious injury.
|
- Always assume the tool contains fasteners. Keep the tool pointed away from yourself and others. No horseplayRespect the tool as a working implement.
|
- Do not overreach.
Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.
|
- Keep bystanders, minors, and visitors away while operating a power tool.
Distractions can cause you to lose control.
| SERVICE
- Tool service must be performed only by Authorized Senco repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.
|
- For information on the “SENCO Safety
First Program,” contact your ENCO representative.
Safety First. The only way to work®0.
| TOOL USE
---|---
| To
Load:
- Place a strip of fasteners into the magazine with points resting on fastener guide. Use only genuine ENCO fasteners.
|
- Push rail forward until it latches.
| To drive
fasteners:
This tool is equipped with a secondary trigger.
- (A) Position tool against work surface.
- (B) Using your middle finger, pull the secondary trigger clear of the primary trigger.
|
- (C) Using your first finger, pull the primary trigger to actuate the tool.
|
WARNING: These tools are not required to have a workpiece contact.
USE CAUTION, as these tools, will drive a fastener when the trigger is
pulled.
FinishPro®21LXP/23LXP:
| NOTE: These tools are equipped with a lockout mechanism that activates to
prevent dry-firing when approximately only five fasteners remain.
FinishPro®23SXP, only:
|
- To continue driving the last few fasteners, while pressing and holding down the lockout override button, pull the trigger.
|
- Should a fastener jam occurs, disconnect air supply
|
- Push latch and slide rail open. Remove fasteners.
|
- Remove jammed fastener.
|
- If you are still unable to remove the jammed fastener, use the onboard wrench to undo the bottom two front screws and remove the front plate for better access to the jammed fastener.
|
WARNING:
Before removing the front plate, make sure the magazine is OPEN.
Removing the front plate with the magazine CLOSED could cause fasteners to be
ejected under pressure.
|
- Push rail forward until it latches.
|
- Keep the tool pointed away from yourself and others and connect air to the tool.
| MAINTENANCE
---|---
|
- Read and understand the “SAFETY INSTRUCTIONS” manual shipped with this tool before using the tool.
|
- All screws should be kept tight. Loose screws result in unsafe operation
and parts breakage.
|
- With the tool disconnected, make a daily inspection to assure free movement of the trigger. Do not use tools if trigger sticks or binds.
|
- Squirt Senco pneumatic oil (5 to 10 drops) into the air inlet twice daily. (Depending on the frequency of tool use.) Other oils may damage O-rings and other tool parts.
|
- Wipe tool clean daily and inspect for wear. Use non-flammable cleaning solutions only if necessary– DO NOT SOAK.
CAUTION: Such solutions may damage O-rings and other tool parts.
TROUBLESHOOTING
WARNING
Repairs other than those described here should be performed only by trained,
qualified personnel. Contact SENCO for information at
1-800-543-4596.
Read and understand the “SAFETY INSTRUCTIONS” manual shipped with this tool
before using the tool.
SYMPTOM
Air leak near the top of tool / Sluggish operation.
SOLUTION
Verify air supply / tighten screws.
SYMPTOM
Air leak near the bottom of tool / Poor return.
SOLUTION
Clean tool / tighten screws.
SYMPTOM
Other problems.
SOLUTION
Contact SENCO.
TECHNICAL SPECIFICATIONS| FINISH 23SXP| FINISH 23LXP| FINISH
21LXP
---|---|---|---
Minimum to maximum operating pressure| 60 – 100| 60 – 110| 60 – 110
Air Consumption (60 cycles per minute) (SCfm)| 1.| 1.| 1.
Air Inlet| %| %| %
Maximum Speed (60 cycles per second)| 5| 5| 5
Weight (Ibs)| 2.| 3.| 3.
Fastener Capacity| 1 strip/ 100 pins| 1 strip/ 100 pins| 1 strip/ 200 pins
Tool size’ Height (in.)| 8.| 9.| 9.
Tool size: Length (in.)| 10.| 10.| 10.
Tool size’ Width: Main Body (in.)| 3.| 3.| 3.
FINISH 23SXP
| A
| Inches| mm
| -1/4| 12
| %| 16
| %| 19
| 1| 25
| 1 1/4| 32
| 1 %| 35
FINISH 23LXP
| A
| Inches| mm
| y2| 12
| %| 16
| 3/4| 19
| 1| 25
| 1 1/4| 32
| 1 %| 35
| 1 1/2| 38
| 2| 50
FINISH 211LXP
| A
| Inches| mm
| %| 15
| Ye| 22
| 1| 25
| 1’/| 30
| 1%| 40
| 2| 50
ACCESSORIES
SENCO offers a full line of DuraSpin screws and accessories for your SENCO
tools, including:
» Adapters (see below)
» Bits (see below)
» Batteries
» Battery Chargers
» Storage Bag
» Assorted Nosepieces (see below)
» Industrial Tool Hangers
» Safety Glasses
For more information or a complete illustrated catalog of Senco accessories,
contact your sales representative or call Senco at
1-800-543-4596
Limited Warranty
SENCO® Pneumatic, DuraSpin®, Cordless Tools
& Compressors
Senco Products, Inc. (“SENCO”) designs and constructs its products using the
highest standards of material and workmanship. SENCO
warrants to the original retail purchaser that the following products will be
free from defects in material or workmanship for the warranty
period specified below:
Pneumatic tools
(both XP and Pro)
Five Years| Fusion Tools
Two Years| Combo Kit Tools
One Year| GasTools
Two Years
---|---|---|---
Duraspin Tools
One Year| Air Compressors
One Year| Multi-Blow Hand Nailers & **Stapling Hammers
** One Year|
During the warranty period (which begins on the purchase date), SENCO will
repair or replace, at SENCO’s option and expense, any product or part that is
defective in materials or workmanship after examination by a SENCO Authorized
Warranty Service Center, subject to the exceptions, exclusions, and
limitations described below.
Any replacement product or part will carry a warranty for the balance of the
warranty period applicable to the replaced product or part. A DATED SALES
RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO
MAKE A WARRANTY CLAIM. Warranty registration also is required and can be
accomplished through online Product Registration at
www.senco.com or by completing and returning the
postage paid warranty registration form included with your Operator’s
manual/parts chart information, found inside the product carton. To make a
warranty claim, you must return the product, with proper receipt/proof of
purchase and return transportation charges prepaid, to a SENCO Authorized
Warranty Service Center. A list of SENCO Authorized Warranty Service Centers
can be found at www.senco.com or by calling
1-800-543-4596 toll-free. SENCO will
perform its obligations under this warranty, within a reasonable time after
approval of the warranty claim.
Wheelbarrow Compressors:
- Subject to the exceptions, exclusions, and limitations described below, SENCO warrants that the compressor pump will be free from defects in materials and workmanship for two years after the purchase date.
- Defective parts of the compressor pump not subject to normal wear and tear will be repaired or replaced, at SENCO’s option, during the two-year warranty period. If SENCO determines that repair or replacement is not feasible, SENCO will refund the purchase price less reasonable depreciation based on actual use.
SENCO Cordless:
- Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the SENCO Cordless tool will be free from defects in materials and workmanship for two years after the purchase date.
- SENCO warrants that the batteries and chargers used with SENCO Cordless tools will be free from defects in material and workmanship for one year after the purchase date.
WARRANTY EXCLUSIONS
The following warranty exclusions apply:
- Normal wear parts are not covered under this warranty. Normal wear parts include, for example, isolators, drive belts, air filters, rubber o-rings, seals, driver blades, piston stops, and piston/driver assembly.
- This warranty does not cover parts damaged due to normal wear, misapplication, misuse, accidents, operation at other than recommended speeds or voltage (electric units only), improper storage, or damage resulting during shipping.
- Products used in production/industrial applications as defined by SENCO are excluded from this warranty.
- Labor charges or loss or damage resulting from improper operation, maintenance or repairs are not covered by this warranty.
- SENCO does not warrant the Wheelbarrow Compressor Engine/Motor, but the Compressor Engine/Motor may be covered under a warranty offered by its manufacturer.
GENERAL WARRANTY CONDITIONS
This warranty will be honored, only if:
A. Clean, dry, regulated compressed air has been used, at air pressure not
exceeding the maximum indicated on the tool casting;
B. No evidence of abuse, abnormal conditions, accident, neglect, misuse or
improper modifications or storage of the product; and
C. No Deviation from operating instructions, specifications, and maintenance
schedules exists (read Operator Manual for use, specifications, and maintenance
instructions).
THIS WARRANTY IS THE ONLY WARRANTY ON THE PRODUCT, AND SENCO DISCLAIMS ALL
OTHER WARRANTIES. ANY IMPLIED WARRANTIES WILL BE LIMITED IN DURATION TO THE
APPLICABLE WARRANTY PERIOD SPECIFIED
ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
YOUR REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. SENCO SHALL IN NO
EVENT BE LIABLE
FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT,
WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING
NEGLIGENCE) OR OTHERWISE, SHALL SENCO’S LIABILITY EXCEED THE PRICE OF THE
PRODUCT WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY
CONNECTED WITH THE
USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD
SPECIFIED ABOVE. NO EMPLOYEE OR REPRESENTATIVE OF SENCO OR ANY DISTRIBUTOR OR
DEALER IS AUTHORIZED
TO MAKE ANY CHANGE OR MODIFICATION TO THIS WARRANTY. This warranty gives you
specific legal rights, and you may also have other rights which vary from state
to state.
REPLACEMENT OF TOOL DUE TO NATURAL DISASTER SENCO will replace any tool
destroyed by an Act of God such as flood, earthquake, hurricane or other
disaster resulting only from the forces of nature. Such a claim will be
honored provided that such original retail purchaser had previously submitted
a completed warranty registration card for the tool, and then submits proof of
ownership and an acceptable statement describing such Act of God documented by
an insurance carrier, police department, or another official governmental
source. To obtain instructions for filing a claim call
1-800-543-4596.
CUSTOMER SATISFACTION
One hundred percent customer satisfaction is our #1 goal. If for any reason
the product does not perform to the original purchaser’s satisfaction, it can
be returned to the place of purchase within thirty days with a dated sales
receipt for a full refund of the purchase price.
© 2013 by SENCO BRANDS, INC.
CINCINNATI, OHIO 45244-1611 USA
www.senco.com
091013
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>