auray PBM-HYD-19 Metal Frame Piano Bench with Hydraulic Adjustable Height Owner’s Manual
- June 12, 2024
- auray
Table of Contents
auray PBM-HYD-19 Metal Frame Piano Bench with Hydraulic Adjustable Height
Product Information
The Auray PBM-HYD-19 is a metal frame piano bench with hydraulic adjustable
height. It is designed to provide a smooth and precise adjustment for the
perfect height during piano performances. The bench features thick padding for
comfort during long sessions at the keyboard.
Important Warnings: The product has been tilt-stability tested. Auray is
not responsible for any injuries due to improper use. The bench must be placed
on a level surface with all four feet touching the surface at the same time.
Product Usage Instructions
Assembling the Piano Bench
- Using the M4 hex wrench, remove the screws, flat washers, and lock washers from the seat.
- Align the holes at the top of the base with the screw sockets in the seat.
- Place the flat washer and lock washer onto the hole, then insert the screw.
- Use the M4 hex wrench to tighten the screws until secure.
- Using the M6 hex wrench, remove the screws and lock washers from the bottom of the adjustable column.
- Align the base with the base attachment holes in the column, ensuring that the foot pads are facing up.
- Drop the M6 hex screw and lock the washer through the top hole, and use the M6 hex wrench to tighten the screws to the adjustable column.
Adjusting the Height
- To adjust the height of the piano bench:
- Pull the adjustment lever toward the seat to activate the hydraulic lift. Adjust the seat height from 17 to 23.25 inches as desired.
Specifications
- Model: PBM-HYD-19
- Maximum Height: 23.25 inches
- Minimum Height: 17 inches
One-Year Limited Warranty
- This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation, or maintenance. The warranty provider does not make any express or implied warranties, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
- For warranty coverage, contact the Auray Customer Service Department to obtain a return merchandise authorization (RMA) number and return the defective product along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
- For more information or to arrange service, visit www.aurayaudio.com or call Customer Service at 212-594-2353.
- Product warranty provided by the Gradus Group. Visit www.gradusgroup.com for more information.
Thank you for choosing Auray.
Auray’s PBM-HYD-19 adjustable piano bench uses hydraulics to smoothly raise
and lower the seat to the perfect height. Precise adjustment allows you to put
the seat to the height for your best performance. The bench features thick
padding for comfort throughout lengthy sessions at the kevboard.
Warnings
This product has been tilt-stability tested. Auray is not responsible for
injury due to improper use. The bench must be on a level surface with all four
feet touching the surface at the same time.
- Please read and follow these instructions, and keep this manual in a safe place.
- Make sure that this product is intact and that there are no missing parts.
- Make sure all parts are secure before using.
- Do not exceed the load capacity.
- All images are for illustrative purposes only.
Overview
- Seat 1
- Adjustable column 2
- Base 3
- M6 hex wrench 4
- M6 hex screws and lock washers (×4) 5
- M4 hex wrench 6
- M4 hex screws, flat washers, and lock washers (×4) 7
Assembling the Piano Bench
- Use the M4 hex wrench to remove the screws, flatwashers, and lock washers from the seat. 1
- Align the holes at the top of the base with the screw sockets in the seat.
- Place the flat washer and the lock washer onto the hole, and then insert the screw. Use the M4 hex wrench to tighten the screws until secure.
- Use the M6 hex wrench to remove the screws and lock washers from the bottom of the adjustable column.
- Align the base with the base attachment holes in the column. Make sure the foot pads are facing up. 3
- Drop the M6 hex screw and lock washer through the top hole, and use the M6 hex wrench to tighten the screws to the adiustable column. 4
Adjusting the Height
Pull the adjustment lever toward the seat to activate the hydraulic lift, and adjust the seat height from 17 to 23.25 inches.
- Use your body weight to lower the seat height.
- Take your weight off the seat to raise the seat height.
Specifications
- Construction Material: Steel (frame and mechanisms)
- Finish: Black powder coat
- Height Adjustment Range: 17 to 23.25 in. (43.2 to 59 cm)
- Dimensions (W × D): 19 × 12 in. (483 × 30.5 cm)
- Base Dimensions (W × D): 17.75 × 12 in. (451 × 30.5 cm)
- Weight: 17 1b. (77 kg)
- Load Capacity: Up to 330 1b. (1497 kg)
Limited Warranty
One-Year Limited Warranty
- This AURAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
- The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment.
- Inoperability of the product or parts) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
- This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
- To obtain warranty coverage, contact the Auray Customer Service
- Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Auray along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
- For more information or to arrange service, visit www.aurayaudio.com or call Customer Service at 212-594-2353.
- Product warranty provided by the Gradus Group. www.gradusgroup.com
AURAY is a registered trademark of the Gradus Group. © 2023 Gradus Group LLC. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>