NESPRESSO CS20 CAPPUCCINATORE & GEMINI MACHINES User Guide
- June 7, 2024
- Nespresso
Table of Contents
RESTARTING YOUR CS20
CAPPUCCINATORE & GEMINI MACHINES
AFTER A PERIOD OF STAGNATION
Your health and safety are our first priority. We want to make it easy for you
to clean and check that your Nespresso Professional coffee machine is
running smoothly again after a long time of non-use.
-
Dispose of any straws and nozzles left on your machine. Rinse water tanks.
-
Plug the machine into the wall power outlet and switch it on. Switch the machine on using the switch on the front panel.
-
Perform daily cleaning cycle, instructions found in the user manual or the Machine Assistance page on the Nespresso Professional website.
-
As described in the user manual, it is important to remove and clean the nozzle with red rings.
a. Use a
toothpick or paperclip to clear the small holes on the nozzle for any milk
build-up.
b. Prior to replacing the nozzle hold down the steam button to observe strong direct steam pressure from the machine. After replacing the nozzle again, hold down the steam button to observe strong direct steam pressure from the machine. -
If using an Autocappuccinatore, disassemble all components of Autocappuccinatore and submerge in hot soapy water to remove any milk build-up. Use supplied brush, refer to the ‘Cleaning of Autocappuccintatore and Accessories’ instructions for more information.
If you require assistance, please complete the contact us form on our website and a Nespresso representative will be in touch.
For Nespresso – Recipe Visit:https://appliance.recipes/category/nespresso