KitchenAid Commercial Style Dual Fuel Range User Guide
- June 7, 2024
- KitchenAid
Table of Contents
KitchenAid Commercial Style Dual Fuel Range User Guide
PRODUCT OVERVIEW
- A.WIFI Antenna Module
- B. Oven Light Button
- C. Mode and Temperature Knob and Indicator Light
- D. Oven Start Button and Indicator Light
- E. WIFI Indicator Light
- F. Remote Enabled Indicator Light
- G. SAID Label
LIGHT INDICATORS AND BEHAVIORS
| FUNCTION | USE & LIGHT BEHAVIOR |
|---|---|
| Oven Start Button | Solid White Light The Start Button will illuminate |
solid white when the most recent command was sent from the app and the
appliance is being controlled remotely. The light will turn off as soon as an
action is taken on the appliance.
Pulsing White Light The Start Button will flash white to prompt the user to
press start after the Mode and Temperature have been selected. If no action is
taken after 2 minutes, a tone will sound and the unit will timeout and return
to idle. To exit idle, re-select a Mode and Temperature before pressing the
Start Button.
Quick-Blinking White Light If an invalid knob combination has been chosen and
the Start Button is pressed, the Indicator Light will quickly blink and a tone
will sound to indicate that the chosen combination is invalid. See the Mode
and Temperature Compatibility Table for valid combinations
Mode and Temperature Indicator Light| Solid White Light When a Mode or
Temperature is selected, and the combination is valid, the Mode and
Temperature Indicator Light will illuminate white
Solid Red Light After a valid Mode and Temperature have been selected and the
Start Button has been pressed, the Indicator Light will turn red until the
preheat is completed.
Solid White Light The light will turn solid white and a tone will sound when
the preheat is complete. If there is no preheat for a cycle, the preheat
completes immediately and the light turns solid white.
Quick-Blinking White Light If an invalid knob combination has been selected,
the light will blink and a tone will sound prompting the user to select a
valid combination. The Indicator Light will continue to blink and a tone will
sound every 30 seconds until the error is fixed or the unit will timeout after
2 minutes of inactivity and return to idle
Pulsing Amber Light The Indicator Light will pulse amber if the oven is
undergoing a 100+ degree decrease in temperature (i.e. changing from Bake
450°F to Bake 350°F) or if the oven is too hot to properly proof and needs to
cool down.
WIFI Indicator Light| Solid White Light The WIFI Indicator Light
illuminates white when the unit is WIFI enabled allowing the user to monitor
the unit. All lights will turn off in idle even when the unit is connected to
WIFI.
Remote Enabled Indicator Light| Solid White Light The Remote Indicator
Light illuminates white when the unit is remote enabled and the user can send
instructions to the unit. All lights will turn off in idle even when the unit
is remote enabled.
**Griddle Power Indicator Light*| Solid Blue Light The Griddle Power
Indicator Light illuminates blue when the griddle is powered on.
Griddle Preheat Light**| Blinking Blue Light The Griddle Preheat Light
flashes blue while the griddle is preheating.
Solid Blue Light Once the preheat temperature has been reached, the Indicator
Light turns solid blue
WIFI CONNECTIVITY
WIFI Connectivity and Remote Operation
Models are provided with a WIFI Antenna Module that allows the unit to be remotely operated. The control is capable of monitoring and performing remote operations once the remote enabling function sequence is properly initiated at the appliance.
To connect your appliance:
- Download the KitchenAid™ App from the Google Play® or Apple App Store and create an account.
- Locate the SAID Label using the diagram on the front of this Guide.
- Set both the Mode and Temperature Knob to the WIFI mode.
- Once the knobs are in position, press the pulsing Start Button.
- When the WIFI Indicator Light to the left of the knob starts blinking white, follow the steps in the app.
- When the connection is complete the WIFI Indicator Light will turn solid white.
- To enable remote operations, turn on “Remote Control” in the app. The Remote Indicator Light will turn solid white to signify remote control commands can be sent to the range.
For more information on WIFI Connectivity, visitwww.kitchenaid.com/connect.
*Appliance must be set to Remote Enable. Features subject to change. Compatible connected appliance required. Details and privacy info at www.kitchenaid.com/connect
MODE AND TEMPERATURE COMPATIBILITY TABLE
| MODE KNOB | TEMPERATURE KNOB |
|---|---|
| Bake | Proof |
Warm
Temperatures (225-500°F)
Broil| Broil High
Broil Low
Convect Bake| Temperatures (225-500°F)
Convect Roast| Temperatures (225-500°F)
Convect Broil| Broil High
Broil Low
Clean| Clean
WIFI| WIFI See WIFI Connectivity Section
NOTE: When the unit is on, Mode can be changed between Bake, Convect Bake, Convect Roast, and Broil/Convect Broil. Press the Start Button to confirm Mode change.
CHANGING MODE/TEMPERATURE DURING A CYCLE
| ACTION | EXAMPLE | |
|---|---|---|
| **Invalid Mode/ Temperature Combination Made During a Cycle*** | If the |
Temperature is changed during a cycle to a selection that is invalid and the unit was in a previous cycle, the unit will remain in the previous cycle until corrected| Mode is in Bake, Temperature is at 350°F (177°C), Start Button is pressed and cycle is running. Then Mode is moved to Broil High. Unit will continue to Bake at 350°F (177°C).
- Mode and Temperature Compatibility Table| The Mode and Temperature Indicator Light will blink to show an invalid selection has been made and will continue to blink until corrected.
Changing Mode Selection During a Cycle| If the Mode or Temperature Knob is changed during a cycle to a selection that is valid, the Start Button will blink to indicate prompt for action. Press the Start Button to begin new setting selection.| If the Mode is moved from Bake to Convect Bake, the Start Button will blink as a prompt for action.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>