Style BV-6267-48DB VANITY with Top User Guide

June 7, 2024
Style

Style™ BV-6267-48DB Vanity with Top User Guide

STYLE SELECTIONS and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

ITEM #2694581

MODEL #BV-6267-48DB

ATTACH YOUR RECEIPT HERE

Style BV-6267-48DB

Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-888-8225, 8 a.m. – 8 p.m., EST, Monday – Sunday.You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.

PACKAGE CONTENTS

Carefully check all components for damages and/or missing parts prior to installation. If there are any damages or if you are missing parts, do not proceed with the installation. Report damages and/or missing parts immediately to the manufacturer. Do not dispose of packaging before you are satisfied with your new utility sink.

PACKAGE CONTENTS

HARDWARE CONTENTS

Note: Hardware not shown to size.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

  • Keep small parts away from children.
  • Some steps are more easily handled with 2 adults.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Installation Time: 20-30 minutes (24 hours for adhesive to dry).

Tools and materials recommended for installation (not included): saw, hammer, variable speed drill, tape measure, level, adjustable wrench, stud finder, lag bolts, screwdrivers (Phillips and flathead), socket and ratchet (for lag bolts), toggle bolts (optional), clear silicone caulk/sealant (do not use plumber’s putty).

TOOLS REQUIRED (NOT INCLUDED)

TOOLS REQUIRED \(NOT INCLUDED\)

INSTALLATION INSTRUCTIONS

Step 1: Hinge Adjustable for Door Alignment

Step 1

1. If the doors preassembled to vanity (A) require adjustment, follow the below options as needed: To adjust door up or down, loosen screws (a ), adjust door and retighten screws. To adjust door left and right, turn screw (b) in or out. To adjust door in and out, loosen screw (c), adjust door and retighten screws.

Step 2: Vanity Drawer Removal

Step 2

2a. Open the preassembled drawer as far as possible.

2b. Simultaneously press the plastic cards on the bottom of drawer left side and right side inward.

2c. Once both plastic cards are held in the indicated position, pull the drawer straight out.

Step 3: Adjustable Level

Step 3

3. In case of uneven floors, floor levelers are provided at the bottom of the vanity. If necessary, adjust floor levelers by hand to correct tilting and/ or level doors.

Step 4: Backsplash Installation

Step 4

4. To mount the backslash (C) to the wall, apply a thin bead of silicone compound (not included) to the unpolished back side and bottom of the backsplash (C). Position backsplash (C) as shown onto vanity top (B) and against the wall. Clean any excess silicone compound before allowing it to dry.

CARE AND MAINTENANCE

  • Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
  • You can clean the vanity with a gentle, non-abrasive household cleaner.
  • Make sure to dry the wood immediately with a soft cloth or towel.
  • The engineered stone top surface is very sensitive to acid-alkaline liquids and materials, such as toothpaste, hand soap, cologne, perfume, nail polish remover, hair color and perm products, shampoo, drain and toilet bowl cleaner, alcohol, lemon juice, medications, etc. Please try to avoid contact of these acid-alkaline liquids and materials with the vanity top surface when possible. If these liquids or materials spill onto the surface, wipe it off immediately. Always clean the surface and keep it dry after use.
  • Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess colorant promptly with a soft cloth.

WARRANTY

The manufacturer provides a one-year limited warranty for residential use. The vanity combo will be free from manufacturing defects, provided the original purchaser resides in or owns the home of installation, and provided the vanity combo is installed and maintained according to the installation and maintenance instructions contained within and supplied by the manufacturer. The liability will be limited to cost of products only. This warranty is in lieu of any other implied or expressed warranties. This warranty applies only to the original purchaser. This warranty does not apply to any damage on the product by accident, misuse, or modified, improper installation or by affixing accessories not produced by the manufacturer. The manufacturer shall not be legally responsible for incidental, consequential or special damages arising at or in connection with product use or performance except as may otherwise be accorded by law.

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-877-888-8225, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.

REPLACEMENT PARTS LIST

REPLACEMENT PARTS LIST Continued

Printed in Vietnam

STYLE SELECTIONS and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Style User Manuals

Related Manuals