Honeywell MAXON PSCHECK Partial Stroke Technology with Series 8000 Pneumatic Safety Shut-off Valve User Guide

: June 7, 2024
: Honeywell

Table of Contents

Choose the configuration that’s right for your system.
Panel Sizes
Explanation of features
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Honeywell Logo MAXON PSCHECK™
Partial Stroke Technology with Series 8000 Pneumatic Safety Shut-off Valve

Selection Guide

Honeywell MAXON PSCHECK Partial Stroke Technology -

Safety First.
Efficiency First.
Success First.

Honeywell MAXON PSCHECK Partial Stroke Technology -
Safty | Honeywell MAXON PSCHECK
Partial Stroke Technology -Safety
---|---

Choose the configuration that’s right for your system.

Features	Panel Options

LED Indicator Lights

No display has buttons and indicator lights

| LCD Touchscreen Display

Display only, easy-to-use interface

Panel Sizes

Non-SIL, Type 12, Type 4X panel sizes:

1-2 Valve Systems	20″H x 20″W x 8″D
3-5 Valve Systems	24″H x 24″W x 8″D
6-9 Valve Systems	36″H x 30″W x 10″D

SIL, Type 4X panel size:

1-9 Valve Systems	36″H x 36″W x 12″D

Honeywell MAXON PSCHECK Partial Stroke Technology with Series 8000
-

Explanation of features

CONFIGURATION
Partial Stroke Test verification of test pass/fail – The partial stroke test can be run manually or automatically at pre-set times. Depending on the system capabilities, the valve’s health status will be conveyed either by LED indicator lights on the panel, via an icon on the touch screen display or via direct communication to the DCS.
Data logging – Valve health trending data is captured in non-volatile microprocessor memory and will retain all of the valve health information for up to 10 years or longer
dependent on how many times a year the valve partial stroke test is run.
Valve degradation error detection – Tests performed by MAXON PSCHECK systems will identify a soft or hard failure (on the 8000 pneumatic SSOV) by checking the amount of time required for the valve to ‘trip’, signaling a capability to either open or close. The longer time it takes to trip the valve indicates potential performance issues. If the valve is degrading it will signal a soft failure alert, if the valve fails it will indicate a failure.
Export of valve trending information – It is simple to export the valve health trending data via a supplied Compact Flash (CF) drive. The information is presented in a . CSV format that can be modified for analysis, audits, and for presentation to regulatory or insurance authorities.
SOFTWARE
Date valve built – A factory build date will be established in permanent memory. Date valve installed and commissioned – During the commissioning process, the customer will be required to set the date the system is installed which will also establish the baseline for the valve’s health.
Valve identification/location – The customer has the ability to set a custom number for each valve to help identify its location.
Trending of valve performance – Diagnostics captures the valve testing information and tracks the overall health of the 8000 pneumatic safety shut- off valve by plotting this information on a touch screen display showing the valve’s health trending over the life of the valve. This trending information or predictive indicator shows a linear relationship between the initial installation health data vs. the degradation of the valve’s performance over the life of the valve. This trending data is used to indicate when the valve may require maintenance, replacement or that it will potentially fail.

Compare valve historical trending data – Ability to switch between three different screens changing the number of captured data points enabling better short and long
term viewing of the trending information.
View alarm history – Captures all alarms, the dates of the alarms, and valve testing information when either a soft ‘alert’ alarm or a hard ‘failure’ alarm is triggered. The system will track all alarm instances over the life of the valve.
Manual test – Ability to start an immediate manual test on the valves by pushing a button on the panel, an icon on the touch screen display or initiated via the DCS dependent on the configuration ordered. The test will return immediate results on the valve’s performance and will not interfere with any pre-set automatic tests nor will it interfere with any of the valve or burner management functions.
Automatic test – The unit will ship from the factory with all systems pre-set to a monthly partial stroke test schedule. In systems with the touch screen display or via DCS connection, the customer will have the option to change the frequency of the test timing to daily, weekly, monthly, quarterly, bi-annually, annually or a custom set test rate.
Set limits on hard and soft alarms – The unit will ship with factory-set limits on when a hard or soft alarm will trigger indicating that the valve’s performance is degrading and maintenance should be scheduled or that the valve has failed the test. Both can be changed by the customer during the commissioning process or at a later date. These limits can be increased meaning the valve will run longer without any warnings or alerts or can be lowered meaning the system will alarm out, indicating the valve’s degradation sooner.
User authorization – For systems with a touch screen display, enables password protected access to limit who can modify the settings and to limit general access to the trending and tracking information. For manual units with LED indicator lights, a key is provided to conduct a manual test.

The MAXON PSCHECK technology is an IEC 61511 SIL2 certified diagnostic system that along with Maxon’s Series 8000 valves helps meet SIL3 compliant Safety Instrumented System (SIS) performance requirements.

Commercial & Industrial Combustion (C&IC)
Honeywell

MUNCIE, INDIANA, USA
Maxon
201 East 18th Street
P.O. Box 2068
Muncie, IN 47307-0068
Tel: 765.284.3304
Fax: 765.286.8394| GOLDEN VALLEY, MINNESOTA, USA
Honeywell Automation and Control Solutions
1985 Douglas Drive North
Golden Valley, MN 55422-3992
www.honeywell.com
---|---

Follow us on Twitter: @honeywellcpro

Sales Offices & Representatives Worldwide
www.maxoncorp.com
customer.honeywell.com

02-00019 PR
July 2014
© 2014 Honeywell International Inc.