BOSE L1 PRO16 PORTABLE LINE ARRAY SYSTEM Instruction Manual
- June 7, 2024
- Bose
Table of Contents
PROFESSIONAL
PRELIMINARY TECHNICAL DATA
L1 PRO16
PORTABLE LINE ARRAY SYSTEM
Product Overview
A balance of power and portability, the L1 Pro16 portable line array is a streamlined system with high output and an extended low-frequency range. With a 16-driver articulated J-shape line array, the L1 Pro16 delivers 180-degree horizontal sound coverage, great for small-to-medium-sized clubs, bars, and other venues. An integrated subwoofer with a RaceTrack driver delivers powerful bass without the bulk; a built-in multi-channel mixer offers EQ, reverb, and phantom power, plus Bluetooth® streaming and access to the full library of ToneMatch presets; and the intuitive L1 Mix app places wireless control in your hands from your smartphone. For DJs, singer-songwriters, and small ensembles, the L1 Pro16 gives you expanded bandwidth and supreme clarity — the power to sound your best and simply perform.
Key Features
Balance power and portability with the L1 Pro system optimized for both
on-the-go simplicity and expanded bandwidth, ideal for small-to-medium-sized
clubs, bars, and other venues
Deliver premium full-range sound with consistent tonal balance for
singer-songwriters, mobile DJs, small ensembles, and more
Maintain supreme vocal and instrument clarity with a J-shape extended-
frequency line array featuring 16 articulated 2″ neodymium drivers and wide
180-degree horizontal coverage
Bring more bass with less bulk with an integrated 10″ × 18″ high-
excursion neodymium RaceTrack woofer; a performance that rivals a conventional
15″ woofer with a smaller footprint
Go from vehicle to venue easily with a modular three-piece system that’s
easier to pack, carry, and set up
Select between optimized system EQ presets for live music, recorded
music, and more
Connect various audio sources easily via built-in mixer with two combos
XLR-1/4″ phantom-powered inputs, 1/4″ and 1/8″ (3.5 mm) aux input, plus
Bluetooth streaming — and access system EQ and ToneMatch presets, volume,
tone, and reverb via illuminated controls
Add in even more instruments and other audio sources via dedicated
ToneMatch port; one cable provides both power and digital audio between the
system and a Bose T4S or T8S mixer (optional)
Take wireless control with the L1 Mix app on your smartphone to adjust
settings instantly from your phone, roam the room and fine-tune, and access
the ToneMatch library of custom EQ presets
Stream high-quality Bluetooth audio from compatible devices
Technical Specifications
System Performance
Model Name| LI P1010
System Type| Self-powered line *nay with integrated bass module and onboard
three-channel dotal mixer
Frequency Response (–3 de) ‘| 42 Hz to 10 kHz
Frequency Range (-10 c113)| 31 Hz to 18 kHz
Nominal Vertical Coverage Pattern| 0V306
Vertical Beam Type| i-shape
Nominal Horizontal Coverage Pattern| 180°
Calculated Maximum SPL 8 I rn. continuous’| 1M dB
Calculated Maximum SPL 8 I m. peak’| 124 dB
Crossover| 200 Hz
Transduces
Low Frequency| 1 • RaceTrack low-frequency duvet 10– x 18′
Low-Frequency Voice Cod Size|
High/mid Frequency| IC • Articulated r drivers
High / mid-Frequency Voice Coil Size| 4C
Driver Protection| Dynamic Irnitrig
AMplirICS011|
Type| Two-channeL Class ID
Low-Frequency Amp Channel| 1000 W
High / Mid Frequency Amp Channel| 250 W
Cooling| Convection cooling
Onboard lOsor|
Channels| Three
Channel 16 2 input. Audio Type| Combination XLR or ‘W TRS connector
(micAnstrumentiline)
Channel 184 2 input. input Impedance| 10 KO Of LR):2 HO (TRS)
Channel 162 input. Tim| Ode. 12 dB. 24 dB. 30 dB. and 45dB analog gain steps
automatically selecte dand compensated by DSP
Channel 1 84 2 input. Channel Gain| -100 dB to 475 dB (XLR): -115 dB to 400 dB
(TRS): from input to driver. controlled by the volume knob
Channel 184 2 input Max Input Signal| +10 dBu (XLR): +24 claim (TRS)
Channel 3 Input Audio Type| Sr TRS (stereo-summed. line). W TRS (lineX
Etketoorit audio streaming
Channel 3 Input input impedance| 40 KO (3.5 min): 200 KO (TRS)
Channel 3 Input. Channel Gain| -105dB to 450 dB (3.5 mm): -115 dB to +40d8
(TRSy. from input to driver. controlled by the volume knob
Channel 3 Input: Max Input Signal| +m) dsu (3.5 mm. +24 dBu (TRS)
Tonematch: Audio Type| RJ-45 connector for ToneMatch cable connection.
providing digital audio and power connection for the optional 74S/T8S
ToneMatch Mixer
Output: Audio Type| XLR connector. line level. full-frequency bandwidth
Bluetooth Enabled| Yes
Bluetooth Types| AAC or SBC for audio streaming. LE for system control
Channel Controls| 3 digital rotary encoders
Phantom Power| Channel 111 2
LED Indicators| Standby. Channel Parameters. SignaVCkp. Mute. Phantom Power.
ToneMatch. Bluetooth LED. System EQ
AC Power
AC Power Input| 100-240 VAC (±20%, 50/60 Hz)
Input: Electrical Type| DEC
Initial turn-on inrush current| 15.7 A at 120 V; 28.4 A at 230 V
Inrush current after AC mains interruption of 5 s| 2.4 A at 120 V; 8.1A at 230
V
Physical
Color| Black
Enclosures Material| Power stand: HIgh-Impact polypropylene
Extension & Array: HIgh-impact ABS
Grille Material| Powder-coated perforated steel
Product Dimensions (H x W x D)| 2011 x 355 x 456 mm (79.2 x 14.0 x 18 in)
Shipping Dimensions (H x W x D)| 1118 x 460 x 650 mm (44.02 x 18.11 x 25.59
in)
Net Weight ‘| 23.0 kg (50.6 Ibs)
Shipping Weight| 28.4 kg (62.6 Ibs)
Included Accessories| Carry bag for arrays, IEC power cord
Optional Accessories| L1 Pro16 System Bag, Ll Prol6 Slip Cover
Warranty Period| 2 years
Product Part Numbers
840920-1100| Ll PRO16 PORTABLE LINE ARRAY,120V, US
840920-2100| Ll PRO16 PORTABLE LINE ARRAY,230V, EU
840920-3100| Ll PRO16 PORTABLE LINE ARRAY,100V, JP
840920-4100| Ll PRO16 PORTABLE LINE ARRAY,230V, UK
840920-5100| Ll PRO16 PORTABLE LINE ARRAY,230V, AU
840920-5130| Ll PRO16 PORTABLE LINE ARRAY,230V, INDIA
856992-0110| PREMIUM ROLLER BAG, L1 PRO16, BLACK
856993-0110| COVER, SUBWOOFER, L1 PRO16, BLACK
845116-0010| TONEMATCH CABLE ASSY KIT 18FT
Footnotes
(1) Frequency response and range measured on-axis in an anechoic environment
with recommended bandpass and EQ.
(2) Maximum SPL calculated using sensitivity and power ratings, exclusive of
power compression.
(3) Net weight excludes carry bag and power cord.
Connections and Controls
-
Channel Parameter Control: Adjust the level of volume, treble, bass, or reverb for your desired channel. Press the control to switch between parameters; rotate the control to adjust the level of your selected parameter.
-
Signal/Clip Indicator : The LED will illuminate green when a signal is present and will illuminate red when the signal is clipping or the system is entering limiting. Reduce the channel or signal volume to prevent signal clipping or limiting.
-
Channel Mute: Mute the output of an individual channel. Press the button to mute the channel. While muted, the button will illuminate white.
-
Channel ToneMatch Button: Select the ToneMatch preset for an individual channel. Use MIC for microphones and use INST for acoustic guitar. The corresponding LED will illuminate white while selected.
-
Channel Input: Analog input for connecting microphone (XLR), instrument (TS unbalanced), or line-level (TRS balanced) cables.
-
Phantom Power: Press the button to apply 48volt power to channels 1 and 2. The LED will illuminate white while phantom power is applied.
-
USB Port: USB-C connector for Bose service use.
Note: This port is not compatible with Thunderbolt 3 cables. -
XLR Line Output: Use an XLR cable to connect the line-level output to a Sub1/Sub2 or another bass module.
-
ToneMatch port: Connect your L1 Pro to a T4S or T8S ToneMatch mixer via a ToneMatch cable.
CAUTION: Do not connect to a computer or phone network. -
Power Input: IEC power cord connection.
-
Standby Button : Press the button to power on the L1 Pro. The LED will illuminate white while the system is on.
-
System EQ: Press the button to scroll through and select a master EQ suitable for the use case. The corresponding LED will illuminate white while selected.
-
TRS Line Input: Use a 6.4-millimeter (1/4-inch) TRS cable to connect line-level audio sources.
-
Aux Line Input: Use a 3.5-millimeter (1/8-inch) TRS cable to connect line-level audio sources.
-
Bluetooth® Pair Button: Set up pairing with Bluetooth-capable devices. The LED will flash blue while the L1 Pro is discoverable and illuminate solid white when a device is paired for streaming.
Product Dimensions
Performance
Frequency Response (On-Axis)
Directivity Index and Q
Beamwidth
Architect and Engineer Specification
The system shall be a multiple-driver, full-range portable loudspeaker system
with internally supplied power amplification and active equalization for
multiple operating modes as follows:
The transducer complement shall consist of 16, 2″ (51 mm) high-excursion
cricket drivers mounted in a curved articulated array loudspeaker, coupled
with an integral 10″ × 18″ (254 mm × 457 mm) RaceTrack low-frequency driver
mounted in a ported bass enclosure. The loudspeaker array shall be wired in a
series/parallel configuration.
The nominal horizontal beamwidth of the loudspeaker shall be 180° and the
nominal vertical coverage shall be 0° to 30°. The system’s power stand shall
incorporate a ported venting system for the low-frequency driver. The power
amplification for transducers shall be supplied by an integral, two-channel
onboard amplifier providing 1000 W for low-frequency transducers and 250 W for
mid-high array transducers.
The onboard digital mixer shall consist of three input channels. Channel 1 and
2 shall provide a combination XLR or 1/4″ TRS connector (mic/instrument/line)
with treble, bass equalization, and reverb effects, and shall also provide
selectable master output equalization with live, music, and speech presets.
Phantom power (48 V) shall be available via a push button to enable and
disable. Both channels shall provide selectable equalization presets for
microphones and instruments. Channel 3 shall provide a 1/8″ TRS (stereo-
summed, line) connector, 1/4″ TRS (line) connector. The same channel shall
provide Bluetooth® audio streaming using a high-definition AAC codec with a
Bluetooth pairing button provided. All three channels shall have a dedicated
channel mute button. The output connector of the onboard mixer shall consist
of one XLR balanced line-level output connector. The onboard mixer shall
provide a ToneMatch RJ-45 connector to receive digital audio and send power
via ToneMatch cable for Bose T4S/T8S ToneMatch mixer.
The enclosure of the power stand shall be constructed of high-impact
polypropylene. The extension and array shall be constructed of high-impact
ABS. The system shall be capable of two operating modes; collapsed or extended
operating mode by integrating height-extension module.
In collapsed mode, the system’s outer dimensions shall be 67.0″ H × 14.0″ W ×
18.0″ D (1704 mm × 355 mm × 456 mm). In extended operating mode, the system’s
outer dimensions shall be 79.2″ H × 14.0″ W × 18.0″ D (2011 mm × 355 mm × 456
mm). The system’s net weight shall be 50.6 lbs (23.0 kg).
The loudspeaker shall be the Bose L1 Pro16 portable line array system.
Safety and Regulatory Compliance
The L1 Pro16 portable line array system complies with the following standards:
- UL/IEC/EN62368-1 Audio/Video, Information, and Communication Technology Equipment
- Ecodesign Requirements for Energy Related Products Directive 2009/125/EC
- Radio Equipment Directive 2014/53/EU
- CAN ICES-3 (B)/NMB-3(B)
- FCC Part 15 Class B
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under
license. Bose, L1, and ToneMatch are trademarks of Bose Corporation. All other
trademarks are the property of their respective owners.
For additional specifications and application information, please visit
PRO.BOSE.COM.
Specifications are subject to change without notice. 6/2021
PRO.BOSE.COM/L1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>