niceboy RAZE 3 TITAN Bluetooth Speaker User Manual

: June 7, 2024
: niceboy

Table of Contents

niceboy RAZE 3 TITAN Bluetooth Speaker
PRODUCT DESCRIPTION
PARAMETERS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

niceboy RAZE 3 TITAN Bluetooth Speaker

product

PACKAGE CONTENTS

Bluetooth speaker
USB-C charging cable
Audio cable
Instructions for Use

PRODUCT DESCRIPTION

LED indicator – USB port
Charging LED indicator
Power on / off
Turn up volume / Next track
Playback / Pause
Turn down volume / Previously played track
Reset Bluetooth connection / Call accept / call decline / hang up / last called number
True Wireless (TWS) function
USB-C charging input port
USB charging – output, input for USB flash drive
Micro SD card slot
AUX port 3.5 mm jack

CHARGING

We recommend fully charging the speaker before its first use to maximize the battery’s life-span. The speaker takes approximately 5 hours to fully charge. Low battery is announced by an audible signal. To charge the speaker’s battery connect the enclosed USB-C cable to the charging port (9) and connect to any charging adapter (voltage 5V and output current minimum of 1A) or to a USB port on your PC. You can follow the charging progress thanks to the 4 charging LED diodes (2), after a full charge is complete, all 4 diodes will be lit.

POWERING ON/OFF
Press and hold button (3) for 2 seconds to power on/off the speaker.

CONNECTING TO BLUETOOTH

Press the power on/off button (3) for 2 seconds to power on the speaker. The speaker is now in pairing mode ready for Bluetooth connection. The pairing mode is signalized by LED diode flashing blue located on button (3).
Activate Bluetooth on your own device. Select “Niceboy RAZE 3 Titan” from the list of available devices.
Your device will connect to the speaker. Successful pairing is announced by an audio signal and flashing of the LED diode (3). Press and hold button (7) to restart the Bluetooth connection.

PLAYBACK
Play or pause tracks by pressing button (5). Press and hold the volume controls, located on buttons (4) and (6) to change volume. Press the volume up button to jump to the next track and the volume down button to jump to the previously played track.

AUX MODE

Insert the enclosed 3.5 mm jack cable into the audio port (12) and the speaker will automatically switch to the relevant mode.
Use the device with which you are connected to the speaker to control music playback. Press and hold the volume controls, located on buttons (4) and (6) to change the volume.

FM MODE
Press the button (3) and FM mode will we announced with an audio signal; press and hold button (5) to automatically search and save radio stations. You can stop the automatic search function by pressing the same button (5). While out of the search function you can switch between radio stations by pressing buttons (4) and (6).

MICRO SD CARD, USB FLASH DRIVE

The speaker will automatically switch over to the relevant mode once an SD card has been inserted.
After inserting a USB disk, press button (3) and the USB mode will be announced by an audio signal.

For both the SD card and USB disk, play or pause tracks by pressing button (5). Press and hold the volume controls, located on buttons (4) and (6) to change the volume. Press the volume up button to jump to the next track and the volume down button to jump to the previously played track. The device supports a maximum data capacity of 32GB and the following audio formats: MP3, WMA, WAV, APE, FLAC.

TRUE WIRELESS (TWS) CONNECTION
With the help of True Wireless (TWS) you can connect two of the Niceboy RAZE 3 Titan speakers to one device and play music through both simultaneously.

Power on both Niceboy RAZE 3 Titan speakers and ensure they are not connected to any other Bluetooth device (mobile, laptop, etc.)
Press button (8) on one of the speakers. The LED diode in button (8) will start flashing orange. An audio signal will announce the successful connection of both speakers and both speakers’ LED diodes will shine orange.
Now you may open the Bluetooth settings on your own device. Select “Niceboy RAZE 3 Titan” from the list of available devices. Successful pairing is announced by an audio signal. To disconnect the speakers, press and hold button (8).

TELEPHONE CALLS
Press button (7) to accept and then end telephone calls. Press and hold the same button to decline a telephone call. Press the same button twice to call the last number in your call list.

SIRI / GOOGLE ASSISTANT
Press and hold button (5) to activate Siri / Google Assistant while in standby mode or playing music.

POWER BANK
The powerbank function is accessible as long as the speaker is powered on. To charge your device, plug in the USB cable to the outlet charging port (10) and connection the device you would like to charge. The LED indicator (1) will flash green to signal that your device is charging. You may charge the same device from which you are currently using Bluetooth to play music.