BOURNS 85028-3 Receptacle for 5-Pin Surge Protectors Instructions
- June 12, 2024
- BOURNS
Table of Contents
85028 Receptacle for 5-Pin Surge Protectors Instructions
85028-3 Receptacle for 5-Pin Surge Protectors
Features
- Simple installation
- Enables board mounted, replaceable 5-pin protection
- Industry standard footprint
- Gold plated contact points
- RoHS compliant*
- Recognized per UL 497 (File: E53117)
Bourns® 85028 receptacles are a convenient way to add primary surge protectors
to printed circuit boards. They accept Bourns® 24xx Series 5-Pin Surge
Protectors and other manufacturers’ 5-pin protectors. These adapters are
equipped with gold-plated contacts for excellent conductivity and corrosion
resistance.
The 85028-2 has short mounting pins for PCB through-hole mounting and the
85028-1 has extended pins for wire-wrap applications.
The 85028-3 has four short pins and one long pin for the ground connection.
The block is made from telecom-grade, V94-0 UL rated thermoplastic.
Characteristics
Plastic Material
Main Body …………………………………………………………………High Temperature Thermoplastic, black, UL
94V-0 Metal Parts
Current-Carrying Components …………………………………….Copper or copper alloys, selective
gold-plated
Insulation Resistance ………………………………………………………> 30 megohms @1000 VDC
Module Contact Resistance ……………………………………………..< 10 milliohms
Wire-wrap Contact Resistance …………………………………………< 2 milliohms
Dielectric Strength …………………………………………………………..> 1500 VDC and > 1000 VAC @ 50-60
Hz for two minutes
Environmental Characteristics
Operating Temperature …………………………………………………….-55 °C to +85 °C (-67 °F to +185
°F) up to 95 % non-condensing R.H.
Storage Temperature ……………………………………………………….-55 °C to +85 °C (-67 °F to +185 °F)
Temperature Characteristics
High Temperature ……………………………………………………………+85 °C (+185 °F) without deformation
Product Dimensions
Legal Disclaimer Notice
products manufactured by or on behalf of Bourns, Inc. and its affiliates
(collectively, “Bourns”).
This legal disclaimer applies to purchasers and users of Bourns® products and
data sheets relating thereto are subject to change without notice. Users
should check for and obtain the latest relevant information and verify that
such information is current and complete before placing orders for Bourns
Unless otherwise expressly indicated in writing, Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data
sheet are based on laboratory conditions, and statements regarding the
suitability of products for certain types of applications are based on Bourns’
knowledge of typical requirements in generic applications. The characteristics
and parameters of a Bourns® product in a user application may vary from the
data sheet characteristics and parameters due to (i) the combination of the
Bourns ® product with other components in the user’s application, or (ii) the
environment of the user application itself. The characteristics and parameters
of a Bourns ® product also can and do vary in different applications and
actual performance may vary over time. Users should always verify the actual
performance of the Bourns ® product in their specific devices and
applications, and make their own independent judgments regarding the amount of
additional test margin to design into their device or application to
compensate for differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns’ product as
meeting the requirements of a particular industry standard (e.g., ISO/TS
16949) or a particular qualification (e.g., UL listed or recognized), Bourns
is not responsible for any failure of an individual Bourns” product to meet
the requirements of such industry standard or particular qualification. Users
of Bourne products are responsible for ensuring compliance with safety-related
requirements and standards applicable to their devices or applications.
Bourne products are not recommended, authorized or intended for use in
nuclear, lifesaving, life-critical or life-sustaining ap-plications, nor in
any other applications where failure or malfunction may result in personal
injury, death, or severe property or environmental damage. Unless expressly
and specifically approved in writing by two authorized Bourns representatives
on a case-by-case basis, use of any Bourne products in such unauthorized
applications might not be safe and thus is at the user’s sole risk. Life-
critical applications include devices identified by the U.S. Food and Drug
Administration as Class III devices and generally equivalent classifications
outside of the United States.
Bourns expressly identifies those Bourns”‘ standard products that are suitable
for use in automotive applications on such products’ data sheets in the
section entitled “Applications.” Unless expressly and specifically approved in
writing by two authorized Bourns representatives on a case-by-case basis, use
of any other Bourns” standard products in an automotive application might not
be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk. If Bourns expressly identifies a sub-category of automotive
application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard
product and has determined that if such Bourns& standard product is considered
for potential use in automotive applications, it should only be used in such
sub-category of automotive applications. Any reference to Bourns’ standard
product in the data sheet as compliant with the AEC-Q standard or “automotive
grade” does not by itself mean that Bourns has approved such product for use
in an automotive application.
Bourne standard products are not tested to comply with United States Federal
Aviation Administration standards generally or any other generally equivalent
governmental organization standard applicable to products designed or
manufactured for use in aircraft or space applications. Bourns expressly
identifies Bourns’ standard products that are suitable for use in aircraft or
space applications on such products’ data sheets in the section entitled
“Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other
Bourns& standard product in an aircraft or space application might not be safe
and thus is not recommended, authorized or intended and is at the user’s sole
risk.
The use and level of testing applicable to Bourns” custom products shall be
negotiated on a case-by-case basis by Bourns and the user for which such
Bourns” custom products are specially designed. Absent a written agreement
between Bourns and the user regarding the use and level of such testing, the
above provisions applicable to Bourns’ standard products shall also apply to
such Bourns” custom products.
Users shall not sell, transfer, export or re-export any Bourns”‘ products or
technology for use in activities which involve the design, development,
production, use or stockpiling of nuclear, chemical or biological weapons or
missiles, nor shall they use Bourns& products or technology in any facility
which engages in activities relating to such devices. The foregoing
restrictions apply to all uses and applications that violate national or
international prohibitions, including embargos or international regulations.
Further, Bourns’ products and Bourns technology and technical data may not
under any circumstance be exported or re-exported to countries subject to
international sanctions or embargoes. Bourns” products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred,
or re-exported to any party not eligible to receive U.S. commodities,
software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any
and all liability for special, punitive, consequential, incidental or indirect
damages or lost revenues or lost profits, and (ii) any and all implied
warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German,
Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual
versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
REV. H 11/20
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal
disclaimers as set forth on the last page
of this document, and at
www.bourns.com/docs/legal/disclaimer.pdf.
Downloaded from Arrow.com.
C1753 05/17/18R
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>