niceboy HIVE PINS Bluetooth Earphones User Manual
- June 7, 2024
- niceboy
Table of Contents
HIVE PINS
User Manual / Bluetooth Earphones
PRODUCT DESCRIPTION
- LED diode
- Multifunctional button
- Charging pins
- Charging LED indicator
- USB-C charging port
FIRST USE AND PAIRING
- Take both headphones out of their charging box and remove the protective stickers from the charging pins (3) on the headphones.
- Power on the headphones by holding and pressing the multifunctional button (2) on both headphones.
- The headphones will power on and connect to each other. As soon as the LED diode (1) begins flashing blue and red, the headphones are ready to connect to Bluetooth.
- Open the Bluetooth settings on your device and select “Nice boy HIVE Pins” from the list of available options.
- Successful pairing is announced by an audio signal.
Simply take the headphones out of their box the next time you would like to use them. They will automatically power on and connect to your device.
POWERING ON AND OFF
Take the headphones out of their charging box to power them on. The headphones may also be powered on manually by pressing and holding both multifunctional buttons.
Power the headphones off by placing them back in their charging box. They will power themselves off and disconnect from your device. The headphones have been placed correctly in their box when the diode (1) shines red. The diode will go out when the headphones are 100% charged. You may also power off the headphones by pressing and holding both multifunctional buttons (2) for approx. 5 seconds.
MULTIFUNCTIONAL BUTTON – BASIC CONTROLS
| Press any button once: | play/pause, accept call/hang-up call |
|---|---|
| Press and hold the right button: | increase volume by one, decline call |
| Press and hold the left button: | decrease volume by one, decline call |
| Press the right button twice: | next track |
| Press the left button twice: | previous track |
| Press the left button three times: | activate voice assistant Siri / Google |
Now
CHARGING:
To charge the actual charging box, plug the charging cable in the USB port (5). The LED diode (4) will flash red when charging and light blue once full charge is complete.
FACTORY SETTINGS:
Place both headphones into their charging box and press and hold both multifunctional buttons (2) until both diodes (1) flash (approx. 9 seconds). The headphones have now returned to their factory settings.
| Bluetooth: | 5.0 |
|---|---|
| Bluetooth profiles: | HFP, A2DP, AVRCP |
| Supported codecs: | SBC |
| Degree of coverage: | IPX5 |
| Transmission range: | 10m |
| Speaker: | 10mm |
| Frequency: | 20Hz-15kHz |
| Sensitivity: | 102 ± 3dB |
| Playback time after one charge: | up to 4 hours |
| Total playback time: | up to 18 hours |
| Headphone battery capacity: | 25mAh |
| Charging box battery capacity: | 380mAh |
| Voice assistants: | Siri and Google Assistant |
PACKAGE CONTENTS:
Nice boy HIVE Pins headphones Charging box
Backup earphone attachment
USB-C cable
Manual
Importer to EU: RTB media s.r.o., Pretlucka 16,
Prague 10, 100 00, Czech Republic, ID: 294 16 876
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>