everdure HBPK Mobile Prep Kitchen Instruction Manual
- June 7, 2024
- everdure
Table of Contents
ASSEMBLY & MAINTENANCE
INSTRUCTIONS
for everdure by heston blumenthal Prep Kitchen
Model Number:
HBPK
MAINTENANCE
CLEANING:
Using a soft cloth thoroughly wipe down all surfaces with a mild detergent and
warm water
DO NOT use scourers or harsh detergents
DO NOT put cutting boards or wooden lids in the dishwasher
DO NOT put seasoning boxes in a microwave or oven to reheat food
STORAGE:
When the prep kitchen is not in use, it can be stored outdoors but MUST be
undercover and covered (preferably with a purpose-made cover HBPKCOVERL) out
of the weather ensuring the cutting surfaces are clean before storing away.
NOTE : These instructions are also available at
www.everdurebyheston.com/international
PACKAGING:
Remove all external packaging and remove the Prep Kitchen from the
packaging before use
Removal all internal cartons and packaging from within the Prep Kitchen
assembly
**** Recycle as per local government laws
ASSEMBLY
NOTE: 2 people required for assembly
Main Parts
Hardware
Step 01
/Rotate (P1) upside-down onto a clean and flat surface, ensuring the body is
protected using a sheet or cardboard. Assemble (P3 x 4) to the bottom plate
using (H5 x 16, H6 x 16, H7 x 16) Ensure the legs are angled outwards (see
final image for reference) and rotate the body to the upright position.
Step
02
/Fix and fully tighten (P2 x 2) onto main body and the side door using (H1 x
4, H2 x 4, H3 x 4).
Step 03
/Slide (P11 x 1) into (P12 x 1)
Step 04
/ Assemble (P13 x 1) to the bottom of the Cutting Board LU (P4 x 1) using (H8
x 3).
*Note, please remove the plastic protection from all wooden boards before assembly.
There are 3 reserved small holes at the bottom of the Cutting Board LU,
corresponding to the installation screws
Step 05
/Fix and fully tighten (H9 x 3) onto both sides at the top of the main body
(H10 x 3).
Step 06
/Place (P4 x 1, P5 x 1, P6 x 1, P7 x 1, P8 x 2, P9 x 3, P10 x 4) into
positon. See final image for reference
*Note, ignore this section if product arrived with parts pre-assembled
