vehicles 1:18 Cool Stunt Twist Truck User Manual

: June 3, 2024
: vehicles

vehicles 1:18 Cool Stunt Twist Truck

About the Stunt Twist Truck

With two modes of racing and climbing modes, the twist truck adopts 2.4G remote control technology to realize forward, backward, left/right sideway, left/right rotation, twist and transformation, light & music, intelligent programming, auto demo, etc. via remote controller or watch controller.

Truck Body
Power Switch
Tires
Light
Battery Compartment

Operation Tips

Operation Environment

Do not use it on public roads or streets to avoid potential threaten to the traffic.
Do not use it in crowded places or around people or animals to avoid potential personal injuries or property losses.
Do not touch or stop the wheels in rotation.
Do not use it in the rain or have it run over puddles to avoid failures.
Do not operate in the rain or make the remote control truck run over puddles to avoid failure.
Do not touch the motor during or right after the operation as it might produce heat.
Take the battery from the remote control vehicles and launcher if not in use.

List of Original Accessories

Stunt Twist Truck xl

|

Screwdriver x1

|

Remote Controller xl

---|---|---

Lithium Battery x1

Watch Controller x1 Included Button Battery x1 (the battery for the remote control version requires additional purchase)

|

USB Charring Cable x1

Note:

Please carefully check the accessories and their quantity (e.g. accessories list). If you find them incomplete, please provide proof of purchase and contact the seller for replacement.

About the Remote Controller

① Watch Controller (the battery for the remote control version

requires additional purchase)

indicator: The red indicator is for the power and will turn up when power on; the green indicators for the process of pairing and will turn up at startup and flans when pairing; the blue indicator is for low voltage and will flash when the battery Is low.
Power Switch: Short press to poweron, long pressfor3 seconds to power off.
Function Button (Switch between rotation and lateral movement modes): Short press to switch between, long press for auto demo (rotation mode has been activated by default at startup)
Note: The watch will power off automatically in 3 minutes in standby mode (i.e. no operations).

② Remote Controller

Antenna
Indicator
Switch
Forward
Backward
Left Rotation/ Sideway
Right Rotation/Sideway
Mode Switch (left and right rotation by default, press to switch to lateral movements mode)
Twist and Transfer
Sound Switch
Short Press for Programming/ Long Press for Demo
Battery Compartment

Button Batteries for Watch Controller

Battery Installation for the Remote Controller

① Open the battery cover of the remote controller

Use a Phillips screwdriver to open the battery cover of the remote controller.

② Install the batteries of the remote controller

Open the battery cover and insert 2 AA alkaline batteries with the two poles a lined correctly. (batteries require additional purchase)

Note:

Ensure the two poles have been aligned correctly when loading the batteries.
Please do not mix old and new batteries.
Please do not mix different types of batteries.

Pair the Remote Controller with the RC Truck

① Pair the Watch Controller with the RC Truck (The remote control version requires additional purchase)

Press the power switch on the controller, and then power on the RC truck when the controller’ s indicators flash slowly. The controller’s indicators turn from slow flash to solid, indicating the pairing has been successful.

② Pair the Remote Controller with the RC Truck

Power on the remote controller first and when the indicator flashes slowly, power on the remote control truck. When you hear the sound of “click” and that indicates standby mode, the red indicator of the remote controller will turn off, indicating the pairing has been successful.

Charge fro RC Truck Battery

① Unscrew the buckle as shown in figure, and then open the battery cover to take the batteries out of the RC truck’s battery compartment.
② Connect the USB charger connector with the battery connector and ensure the two poles a lined correctly. Plug the USB cable of the USB charger into the computer interface, and you’ll seethe LED light turns on when being charged and off when charging completes. It takes 90-120 minutes to charge up to full and gives 20-25 minutes of playing time.
③ After charging, insert the batteries into the battery compartment and connect them with the connector on the circuit board with the two poles a lined correctly.

Note:

This product is suitable for children above 8 years old. Minors must have the Supervision of an adult when using this product.
Please be careful when using all electronic products to protect yourself from electric shock.
Please do not disassemble or modify this product without authorization, as any modification may result in malfunction.

Operating Steps

① Power on the remote control truck, keep it stable, and slowly toggle the throttle joystick on the remote controller (see figure ①) to see if the remote control truck moves forward or backward.

② Place the remote control truck on the ground and slowly toggle the rudder joystick on the remote controller (see figure② ) see if the wheels are rotating.

Note:

Please comply with the following steps to avoid losing the remote control tank or losing control of it:

Power on the remote controller.
Power on the remote control truck.
Follow the reverse steps to turn it off.

Batter Safety Precautions

There is potential risk of personal injuries and property loss when using batteries. Please be cautious and bear the responsibilities for your own safety.
If the battery leaks, please avoid direct contact with your skin or eyes. Please immediately wash with soap and running water if it gets on your skin, and wash with plenty of cold water and seek for doctors if it gets on your eyes.
If the charger smells suspicious or emits smoke, unplug it immediately.

Charging

Please use the original specific USB charger and do not use ones that are broken or from other brands.
Do not charge your battery when it is swollen, leaking or worn-out.
Do not over charge the battery. Please disconnect the charger when the battery has been fully charged.
Do not charge the battery around flammable materials (such as carpets, wood floors, solid wood furniture, etc.) or on surfaces of conductive objects. Keep the battery in line of sight during charging.
Do not rush to charge the battery when it does not cool down yet after usage.
Ensure the charging temperature is between 0°C and 40°C.

Adapter

Please use the appropriate adapter for charging.
Input: 100-240V~S0/60Hz 0.2A, output: 5.0V=-=-=S00mA 0.5-1.SA

Recycling

This product consists of electric components and batteries.
Please follow the local regulations to specifically dispose the electric wastes and appliances.

Play with Remote Controller

Watch Controller (the remote control version requires additional

purchase)

① Forward & Backward

It will move forward when your fist horizontally tilts forward and move backward when your fist horizontally tilts backward.

② Left and Right Rotation(Default Rotation Mode at Startup)

It will implement left rotation when your fist horizontally tilts to the left and right rotation when your fist horizontally tilts to the right.

③ Left and Right Side way(short Press the Function Button to Switch to lateral/movement Mode)

It will move laterally to left when your fist horizontally tilts to the left and move laterally to right when your fist horizontally tilts to the right.

④ Turn Left and Right (Default at Startup)

It will turn left when your fist horizontally tilts forward and to the left, and turn right when your fist horizontally tilts backward to the right.

⑤ 45° Left and Right Forward

It will move forward at 45° to the left when your fist horizontally tills forward and to the left, and move forward at 45° to the right when your fist horizontally tills forward and to the right.

⑥ Twist and Transform

When you level up your arms, the main body ascends vertically to transform to Climbing Mode. When you level down your arms, the main body descends vertically to transform to Racing Mode.

⑦ Auto Demo

Press the function button to enable auto demo.

Remote Controller

① Forward & Backward

Press the forward/backward button on the remote controller to let it move forward/ backward.

② Left/Right Rotation

Press the left/right rotation button on the remote controller to let it rotate to the left/right.

③ Left/Right Sideway

Press the sideway/rotation button on the remote controller to switch to Lateral Mode (default mode at startup), and press the left /right side way button to let it move to the left/right.

④ Twist & Transform

⑤ Sound Switch

Press the sound switch button to turn it off and press again to turn it on.

⑥ Programming and Auto Demo

Press the programming button to add commands with up to 15 combo besides music, water boom/blaster launch, spray, auto demo. Once done, press again to demonstrate the command combo one by one.

Let’s practice! Use angle towers (applicable separately, such as empty bottles) to let the remote control vehicle loop around in wide and spacious space. Basically, it is safe to speed up when driving in the straight line and slow down in corners.

Maintenance

Remove the battery from the remote control tank when it is not in use.

Wipe off the sands muds or dusts.

Apply the anti-rust oil to the extremal metal part (Separate purchase for anti-rust oil is required).

Place the remote control tank and the battery separately for storage when the remote anti-rust oil is control tank is not in use.

Battery Storage

Do not fully charge the lithium battery before keeping it for a long time, otherwise It would result in the passivation, which speeds up the process of self-discharge (see image ①).
Place the lithium battery in dry indoor space with appropriate temperature between10′ C-30′ (see image ②).
Conduct a charge cycle every other3 months to keep it active and perform well ( see Image ③)

Troubleshooting

Problems

| Reasons|

Solutions

---|---|---
Wheels Cannot spin| ON/OFF switch not turned on| Turn the switch to ON
Low battery| Replace with new batteries or charge the batteries
Fail to pair| Repeats the steps to pair again
Suddenly stop running| Low voltage| Replace with new batteries or charge the batteries
Remote controller’s indicators flash| Low voltage| Replace with new batteries
RC vehicle moves slowly| Low voltage| Replace with new batteries
RC vehicle remains still after moving same distances| Out of control range| Use It with in control range of up to 30 meters for remote controller and 20 meters for watch controller.

FCC Statement

OTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resident in installation. This equipment generates uses and Can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bidet ermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of t he following measures: