Pinghu Little Sun Childs Vehicles S2688 Ride On Car Instruction Manual
- June 5, 2024
- Pinghu Little Sun Childs Vehicles
Table of Contents
Little Sun Childs Vehicles S2688 Ride On Car
Instruction Manual
DEALERS MUST TRANSLATE THEIR OWN LANGUAGE OF THE MANUAL INSTRUCTIONS BELOW
FOR YOUR MARKET.
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE.
Styles and colors may vary
Keep the package away from children and dispose of it properly before use
Specification:
Motor | 2*15W |
---|---|
Battery | 12V4.5AH*1 |
Charger | 12V500MA / |
Speed | 1.2-2.1km/hr |
Suitable age : | 37-96 month |
Load Capacity: | Under 30KGS |
Size of car: | 737344CM |
Power way: | Charging type |
Charge time : | 8-12 hours |
Packing list:
Number | Name | Quantity |
---|---|---|
1 | Remote Control (optional) | 1 |
2 | Charger | 1 |
3 | Manual | 1 |
Assembly tools required:
| Cross screwdriver (not included)
---|---
WARNING!
FOR THE SAFETY OF YOUR CHILDREN, PLEASE READ ALL WARNINGS AND ASSEMBLY/USE
INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE.
- ADULT ASSEMBLY REQUIRED. The product contains small parts, which are for adult assembly only. Keep children away when assembling.
- Always remove protective material and poly bags and dispose before assembly.
Operation Instruction:
A. Power Connecting & Install seat
- Open the battery under the seat, connect the battery terminals (red to red, Black to black)
- Cover the seat on the battery
- Fix the seat with a screw by cross screwdriver
B. Function introduction (Optional)
Optional 1
- Forward-backward button: control the car forward or backward, the middle is stop
- Light button: Turn on /off the light
- Power button: Turn the vehicle on and off
- Socket: Charge
Optional 2
- Forward-backward button: control the car forward or backward, the middle is to stop
- Power button: Turn the vehicle on and off
- Music button: Play music or reduce music sounds
- Light button: Turn on /off the light(increase music sounds)
- Socket: Charge
Turn on the power to automatically search for Bluetooth
C. Use The Remote Control
NOTE: This product does not include the AAA(1.5v)
Only allow adults to use remote control, can not let the children touch
Operation manual: For the first time to use (Or Replace the battery)Need to frequency bind
- Take out the remote control, install the battery
- Long press on the button “M” for 2‐4 seconds, and the Indicator Light will flash
- Turn on the power of the car, Indicator light flashes to long lighting, then frequency bindsucceed
- If the frequency bind failed (Indicator light flashes), remove the battery and repeat steps 1~3
- remote control without operation after 10 seconds, the Indicator light will off into power-saving mode
- Button Description: △ forward ▽ backward ◁ turn left ▷turn right
P: emergency brake, press it and the running function will fail, press again, and it release
Safety
WARNING!
PREVENT INJURIES AND DEATHS:
- NEVER LEAVE A CHILD UNATTENDED. DIRECT ADULT SUPERVISION IS REQUIRED. Always keep the child in view when a child is in the vehicle.
- This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
- Protective equipment should be worn.
- Never use in roadways, near cars, on or near steep inclines or steps, swimming pools, or other bodies of water.
- Always wear shoes.
- Always sit on the seat.
- Not to be used in traffic.
- This toy is unsuitable for children under 37 months due to its maximum speed; the maximum user weight is 30 kgs.
- This toy has no brake.
Rules for Safe Riding
-
Keep children within safe riding areas:
Never use it in the roadway, near motor vehicles, on lawn space, on or near steep inclines or steps swimming pools, or other bodies of water;
Use the toy only on flat surfaces. Such as inside your house, garden, or playground -
Never use it in the dark. A child could encounter unexpected obstacles and have an accident. Operate the vehicles only in the daytime or in a well-lit area.
-
It is prohibited to change the circuit or add other electric parts.
-
Inspect wires and connections of the vehicle periodically
-
Do not let any child touch the wheels or be near them when the car is moving.
NEVER pick up the battery by the wires or charger. Damage can occur to
the battery and may cause a fire. Pick up the battery by the case ONLY.
– Charge the battery in a dry area ONLY.
-
Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm.
Wash hands after handling. -
Do not open the battery. The battery contains lead-acid and other materials that are toxic and corrosive.
-
Do not open the charger. Exposed wiring and circuitry inside case electric shock. Only adults may handle or charge the battery. NEVER allow the child to handle or charge the battery. The battery is heavy and contains lead-acid (electrolyte).
-
Do not drop the battery. Permanent damage to the battery could occur or cause serious injury.
-
Before charging the battery, check for wear or damage to the battery, charger, supply cord, and connectors. DO NOT charge the battery if any damage to parts has occurred.
-
Do not allow the battery to drain completely. Recharge the battery after each use or once a month if not used regularly.
-
Do not charge the battery upside down.
-
Always secure the battery with a bracket, Battery can fall out and injure a child if the vehicle tips over.
-
The POWER SWITCH must be turned in the OFF position when charging.
-
Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery for more than 10 hours to avoid overheating the charger.
-
When the vehicle begins to run slowly, recharge the battery.
-
After each use or once a month minimum recharge times as 8 to 12 hours, less than 20 hours at most.
Charging
ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!
Put the charger plug into the socket as picture
Battery Replacement
To avoid losing power, follow these guidelines:
- Do not overload the vehicle.
- Do not tow anything behind the vehicle.
- Do not drive up steep slopes.
- Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to overheat.
- Do not drive in very hot weather, components may overheat.
- Do not allow water or other liquid to come in contact with the battery or other electric components.
- Do not tamper with the electric system. Doing so many create a short, causing the fuse to trip.
Troubleshooting Guide
Problem | Possible Cause | Solution |
---|---|---|
Vehicle does not run | Battery low on power | Recharge battery |
Fuse has broken | Replace,see |
|
Battery connector or wires are loose | Check that battery connector are firmly |
plugged into each other. If wires are loose around the motor contact your
distributor, please
Battery is dead| Replace the battery, contact your distributor, and please
The electrical system is damaged| Contact your distributor, please
Motor is damaged| Contact your distributor, please
The vehicle does not run very long| The batter is undercharged| Check that the
battery connectors are firmly plugged into each other when recharging
Battery is old| Replace the battery, contact your distributor, please.
Vehicle runs sluggishly| Battery low on power| Recharge the battery, contact
your distributor, please.
Battery is old| Recharge the battery, contact your distributor, please.
Vehicle is overload| Reduce weight on vehicles. The maximum user weight is 30
kgs.
The vehicle is being used in harsh conditions| Avoid using the vehicle in
harsh conditions, see
The vehicle needs a push to go forward| Poor contact with wires or connectors|
Check that the battery connectors are firmly plugged into each other. If wires
are loose around the motor, contact your distributor, please.
“Dead Spot” on motor| A dead spot means the electric power is not being
delivered to the terminal connection and the vehicle needs repair. Contact
your distributor, please.
Loud grinding or clicking noises coming from the motor or gearbox| Motor or
gears are damaged| Contact your distributor, please.
Battery with not recharge| Battery connector
adapter connector is loose| Check that the battery connectors are firmly
plugged into each other.
The charger is not plugged in| Check that the battery charge is plugged into a
working wall outlet.
| The charger is not working| Contact your distributor, please.
---|---|---
The charger feels warm when recharging| This is normal and not a cause for
concern|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>