V-TAC LED CHANDELIER Installation Guide
- June 7, 2024
- V TAC
Table of Contents
INSTALLATION INSTRUCTION
LED CHANDELIER
A
djustable H eight
| MODEL | VT-25-1 | VT-32-1 |
|---|---|---|
| WATTS | 25W | 30W |
| LUMENS | 1875LM | 2250LM |
| BEAM ANGLE | 120° | 120° |
| MATERIAL | Iron+Acrylic | Iron+Acrylic |
| BASE SIZE | ⌀230x25mm | ⌀230x25mm |
| DIMENSION | ⌀450mm | ⌀600mm |
| INPUT POWER | AC: 220-240V, 50/60Hz |
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid
for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any sur- face due to incorrect removal and installation of the product. The products are suitable for 10-12
Hours Daily operation. Usage of product for 24 hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please turn off the power and read this instruction before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Proper grounding should be ensured throughout the installation.
- Installation should only be done by a certified electrician.
- For Indoor Use only
| This marking indicates that this product should not be disposed of with
other household wastes.
---|---
| Caution, risk of electric shock.
INSTALLATION DIAGRAM:
WIRING DIAGRAM
| Neutral Supply can be Blue or Black
Ground Supply Can be Green or Yellow
Live Supply Can be Red or Brown
-
Switch off the power before starting the installation.
-
Use screws to fix mounting bar to the junction box.
-
Make the wire connections with connectors.
• Connect the live wire (L) from fitting to the live wire from the main power supply.
• Connect the neutral wire (N) from fitting to the neutral wire from the main power supply.
• Connect the earth wire from fitting to the earth wire from the main power supply.
• Please pay close attention and make sure the wires are not exposed outside when wiring connections. -
Use screws to fix the canopy to the mounting bar.
-
Check if the installation is completed and turn on the power.
Note: This light is designed with adjustable height, press the pin on the canopy to adjust the height of the light.
In case of any query/issue with the product, please reach out to us at:
support@v-tac.eu For More products range, inquiry
please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria,
Plovdiv 4000, bul.L.Karavelow 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>