BOSE Videobar VB1 Mud Ring User Guide

June 7, 2024
Bose

Bose logo

BOSE Videobar VB1 Mud Ring

BOSE Videobar VB1 Mud Ring

Instructions

Please read and keep all safety, security, and use instructions.

This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation and safety guidelines for this product in typical fixed- installation systems. Please read this document and all safety warnings before attempting installation.

WARNINGS
  • All Bose products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this product.
  • Do not make unauthorized alterations to this product.
  • This product is not intended for installation or use in wet locations.
  • This mud ring is designed for use with Bose Videobar products only. Use of this mud ring with other products may lead to a hazardous condition which could result in injury.
  • Only for mounting to metal 2-gang boxes: 119 × 119 mm (411/16 × 411/16 in), 102 × 102 mm (4 × 4 in), and 95 × 95 mm (33/4 × 33/4 in). Do not mount to any other box.Dimensions
  • Wall use only. For fixture support of 4.5 kg (9.9 lb) or less.
  • This mud ring is intended for use with wallboard with a maximum thickness of 16 mm (5/8 in).
  • For use with new work boxes only.
  • For use with low-voltage Class 2 wiring only.

Installation Instructions

  1. Attach the mud ring to the electrical box (see Figure 1).image 1
  2. The protruding part of the mud ring should fit into a hole cut into the wallboard: 134 mm (5.3 in) wide and 38 mm (1.5 in) high. The wallboard should not be thicker than 16 mm (5/8 in)(see Figure 2).image 2
  3. Use the two table-stand screws (labeled A) included with the Bose Videobar VB1 to attach the hinged brackets of the VB1 to the two screwholes on either side of the opening on the mud ring (see Figure 3).

For more information, see the owner’s guide online at worldwide.Bose.com/Support/VB1

Regulatory Information

  • Model/型号 : MR1
  • Dimensions (height × width × depth): 120 mm × 132 mm × 18 mm (4.7 in × 5.2 in × 0.7 in)
  • Net Weight: 0.29 kg (0.65 lb)
  • Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “1” is 2011 or 2021. China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
  • EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
  • Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. For service or importer information, call +5255 (5202) 3545.
  • Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan. Phone Number: +886-2-2514 7676
  • Bose Corporation Headquarters: 1-877-230-5639
    Bose and Videobar are trademarks of Bose Corporation. ©2021 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.

Warranty Information

This product is covered by a limited warranty. For warranty details, visit pro.Bose.com/warranty

Bose logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals