BOSE AMM112 Multipurpose Loudspeaker User Guide
- June 7, 2024
- Bose
Table of Contents
AMM112
Multipurpose Loudspeaker
Important Safety Instructions
Please read and keep all safety, security, and use instructions.
This product is intended for installation by professional installers
only!
This document is intended to provide users with safety guidelines and basic
setup information only. If this product will be mounted or suspended in a
permanent, fixed installation, please review all relevant documentation from
Bose (see Additional Product Documentation ) and from the manufacturer of
all other installation components before installing the product.
Do not attempt to service this product yourself. Refer all servicing to
authorized service centers, installers, technicians, dealers or distributors.
To contact Bose Professional or to find a dealer or distributor near you,
visit PRO.BOSE.COM.
WARNINGS/CAUTIONS
This symbol on the product means there are important operating and maintenance
instructions in this guide.
This product contains magnetic material. Consult your physician on whether
this might affect your implantable medical device.
All Bose products must be installed in accordance with local, state, federal
and industry regulations. It is the installer’s responsibility to ensure the
installation of the loudspeakers and mounting system is performed in
accordance with all applicable codes, including local building codes and
regulations. Consult the local authority having jurisdiction before installing
this product.
Installed loudspeakers require regular inspection and routine maintenance to
ensure proper function and safe operation. Inspect mounting hardware and
attachments for signs of corrosion, bending or any other condition that may
decrease the structural integrity. Immediately replace worn or damaged
components.
Do not make unauthorized alterations to this product.
Do not mount on surfaces that are not sturdy, or that have hazards concealed
behind them, such as electrical wiring or plumbing. Ensure the bracket is
installed by a qualified professional installer and in accordance with local
building codes.
Do not place or install the bracket or product near any heat sources, such as
fireplaces, radiators, heat registers or other apparatus (including
amplifiers) that produce heat.
Do not use in vehicles or boats.
Due to ventilation requirements, Bose does not recommend placing the product
in a confined space such as in a wall cavity or in an enclosed cabinet.
Do not expose this product to dripping or splashing, and do not place objects
filled with liquids, such as vases, on or near the product.
Do not mount the product in locations where condensation may occur.
This product is not intended for installation or use in indoor water facility
areas (including, without limitation, indoor pools, indoor water parks, hot
tub rooms, saunas, steam rooms, and indoor skating rinks).
Unsafe mounting or overhead suspension of any heavy load can result in serious
injury or death, and property damage. It is the installer’s responsibility to
evaluate the reliability of any mounting method used for their application.
Only professional installers with the knowledge of proper hardware and safe
mounting techniques should attempt to install any loudspeaker overhead.
Do not expose loudspeaker or mounting components to any chemical substances
that are not specified by Bose, including but not limited to lubricants,
cleaning agents, contact sprays, or hydrocarbon-based solvents. Exposure to
such substances can lead to degradation of the plastic material, resulting in
cracking and creating a falling hazard.
Regulatory Information
Model Number: AMM112
Bose Corporation hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/35/EU
and all other applicable EU directive requirements. The complete declaration
of conformity can be found at:
www.Bose.com/compliance.
This symbol means the product must not be discarded as household waste and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling help protect natural resources, human health,
and the environment. For more information on the disposal and recycling of
this product, contact your local municipality, disposal service, or the shop
where you bought this product.
China Restriction of Hazardous Substances Table
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part Name| Lead
(Pb)| Mercury
(Hg)| Cadmium
(Cd)| Hexavalent
(CR(VI))| Polybrominated
Biphenyl (PBB)| Polybrominated
diphenyl ether (PBDE)
PCBs| X| 0| 0| 0| 0| 0
Metal Parts| X| 0| 0| 0| 0| 0
Plastic Parts| 0| 0| 0| 0| 0| 0
Speakers| X| 0| 0| 0| 0| 0
Cables| X| 0| 0| 0| 0| 0
This table is prepared in accordance with the provisions of SJ/T 11364.
0: Indicates that this toxic or hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement of GB/T
26572.|
X: Indicates that this toxic or hazardous substance contained in at least one
of the homogeneous materials used for this part is above the limit requirement
of GB/T 26572.
Taiwan Restriction of Hazardous Substances Table
Equipment name: Professional Loudspeaker Type designation: AMM112
Restricted substances and its chemical symbols
Unit| Lead
(Pb)| Mercury
(Hg)| Cadmium
um (Cd)| Hexavalent
chromium
(Cr+6)| Polybrominated
biphenyls
(PBB)| Polybrominated
diphenyl ethers
(PBDE)
PCBs| –| o| o| o| o| o
Metal Parts| –| o| o| o| o| o
Plastic Parts| a| o| o| o| o| o
Speakers| –| o| o| o| o| o
Cables| –| o| o| o| o| o
Note 1: “o” indicates that the percentage content of the restricted
substance does not exceed the percentage of the reference value of presence.
Note 2: The “-” indicates that the restricted substance corresponds to
the exemption.
Date of Manufacture: The eighth digit in the serial number indicates the
year of manufacture; “0” is 2010 or 2020.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C,
Plant 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The
Netherlands
Mexico Importer: Bose de México, S. de R.L. de C.V., Paseo de las Palmas
405-204, Lomas de Chapultepec, 11000 México, D.F. For service or importer
information, call +5255 (5202) 3545
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng
East Road, Taipei City 104, Taiwan. Phone Number: +886-2-2514 7676
Bose Corporation Headquarters:
1-877-230-5639
Bose and PowerMatch are trademarks of Bose Corporation.
Loctite and 242 are trademarks and/or registered trademarks of Henkel and/or
its affiliates in the U.S. and elsewhere.
Neutrik is a registered trademark of Neutrik AG.
All other trademarks are the property of their respective owners.
©2020 Bose Corporation. No part of this work may be reproduced, modified,
distributed or otherwise used without prior written permission.
Warranty Information
This product is covered by a limited warranty.
For warranty details, visit
pro.Bose.com/warranty.
Additional Product Documentation
This guide includes basic setup information only. If this product will be
mounted or suspended in a permanent, fixed installation, please review all
relevant documentation from Bose on the web page shown here.
To ensure safe product installation, it is the installer’s responsibility
to refer to all relevant documentation for this product and all other
installation components before installing the product.
Only professional installers with the knowledge of proper hardware and safe
mounting techniques should attempt to install any loudspeaker or subwoofer
overhead.
To access additional Bose documentation for this product, scan the QR code or
visit the web page shown here.
Product Details
- Input connection
- 35 mm (1⅜ in) pole cup (for pole-mounting)
- M10 threaded insert (for accessory attachment/mounting)
- Handle
Net weight: 22.04 kg (48.60 lb)
Basic Setup
Stage Fill
WARNING: Make sure the stage or floor is stable and level.
WARNING: Do not allow the loudspeaker to protrude over the edge of a
stage. Make sure the entire loudspeaker is resting on the stage.
Loudspeaker Stand
WARNING: Make sure the stand is placed on a stable, level surface.
WARNING: Refer to all relevant documentation for the pole or stand before
attaching the loudspeaker.
Make sure the pole or stand can support the weight of the loudspeaker. Once
the pole or stand is assembled and the loudspeaker is attached, make sure the
whole assembly is stable and does not present a tipping or falling hazard.
WARNING: Do not attempt to move the whole assembly. Remove the
loudspeaker from the pole before moving the stand.
With a Subwoofer
WARNING: Make sure the subwoofer is placed on a stable, level surface.
WARNING: Refer to all relevant documentation for the subwoofer and pole
before attaching the loudspeaker.
Make sure the subwoofer and pole can support the weight of the loudspeaker.
Once the subwoofer and pole are assembled and the loudspeaker is attached,
make sure the whole assembly is stable and does not present a tipping or
falling hazard.
WARNING: Do not attempt to move the whole assembly. Remove the
loudspeaker from the pole before moving the subwoofer.
WARNING: Do not use a pole mount with a stack of subwoofers.
Installation (Mounting or Suspension)
Installation Guidelines
Bose AMM loudspeakers include threaded inserts to accommodate mounting or
suspension methods as described in this document.
Unsafe mounting or overhead suspension of any heavy load can result in serious
injury or death and property damage.
It is the installer’s responsibility to evaluate the reliability of any
mounting method used for their application. Only professional installers
with the knowledge of proper hardware and safe mounting techniques should
attempt to install any loudspeaker or subwoofer overhead.
Bose AMM loudspeakers are designed for use with Bose accessories for mounting
and suspension. If you are using a custom-designed mounting or suspension
system, have a licensed professional engineer review the design and planned
method of attachment to the building structure for structural integrity and
safety in the intended application.
Choose fasteners that are consistent with all local building codes and
requirements to support the weight of the loudspeaker.
- Use only fasteners/hardware of Class 8.8 or greater.
- Do not use unmarked machine fasteners for mounting system assemblies as there is no way to determine their physical properties.
- Use only M10 fasteners for the threaded inserts on the loudspeaker. Although SAE ⅜”–16 fasteners are similar, they are not interchangeable with M10 fasteners.
- Do not over-tighten fasteners. Doing so may irreparably damage the cabinet and create an unsafe assembly.
- Make sure fasteners are long enough to engage at least 8 threads of the attachment point. Using a fastener that is engaged with fewer than 8 threads will result in inadequate support of the loudspeaker, which may strip the threads and create an unsafe assembly.
- Do not alter or re-thread the threaded attachment points to accommodate any other thread size or type. Doing so will compromise the safety of the installation and permanently damage the loudspeaker.
- For a vibration-resistant assembly, use a locking compound intended for hand disassembly (such as Loctite® 242®).
Do not use the loudspeaker handles to suspend the loudspeaker.
Do not suspend additional loudspeakers or other items from the Bose AMM
loudspeaker.
Wall-, Ceiling-, or Truss-mounting
WARNING: To ensure safe product installation and usage, it is the
installer’s responsibility to refer to the previous Installation Guidelines
section and the user documentation of all mounting components before
installing the product.
To mount the loudspeaker on a wall, ceiling, or truss, we recommend using the
Bose accessories listed below when possible. To access documentation for each
product, scan the QR code or visit the web page.
AMM112 U-Bracket Kit
843364-0010
https://pro.Bose.com/amm112ubracket
AMM Suspension Bracket
843344-0010
https://pro.Bose.com/ammsbracket
If you are using a custom-designed mounting or suspension system or hardware, a licensed professional engineer must review the design and fabrication. Obtain all mounting or suspension system components from reputable manufacturers.
Installation / Technical Information
Suspension
WARNING: To ensure safe product installation and usage, it is the
installer’s responsibility to refer to the previous Installation Guidelines
section and the user documentation of all mounting components before
installing the product.
To suspend the loudspeaker from the ceiling, attach M10 threaded eye bolts to
the two M10 threaded attachment points on the top or bottom panel of the
loudspeaker. Use only load-rated eye bolts intended for lifting (per ASME
B30.26).
For easier adjustment of the angle, use the AMM Suspension Bracket
(843344-0010). To access documentation for the AMM Suspension Bracket, scan
the QR code or visit
pro.Bose.com/ammsbracket.
If you are using a custom-designed mounting or suspension system or hardware,
a licensed professional engineer must review the design and fabrication.
Obtain all mounting or suspension system components from reputable
manufacturers.
https://pro.Bose.com/ammsbracket
Processor Presets
Use only approved Bose Professional loudspeaker presets. The presets listed
here are available when using Bose Professional PowerMatch
amplifiers.
For a complete list of products that support Bose Professional AMM,
loudspeaker presets visit PRO.BOSE.COM.
| Application | Preset Name |
|---|---|
| Main Loudspeaker | AMM112(FR) |
AMM112(LF)
AMM112(LF90)
AMM112(HF)
Main Loudspeaker +
Subwoofer| AMM112(FR)
AMM112(90)
AMM112(LF)
AMM112(LF90)
AMM112(HF)
Stage Monitor| AMM112(MON)
AMM112(90-MON)
AMM112(LF-MON)
AMM112(LF90-MON)
AMM112(HF-MON)
Technical Specifications
| Coverage | 110° horizontal x 60° vertical |
|---|---|
| Tilt-back Angle | 35° |
| IP Rating | IP43 (front-of-house position only) |
| Connectors | 2 x Neutrik” NL4 inputs |
Pin 1+: FR+
Pin 1-: FR-
Pin 2+: Not connected
Pin 2-: Not connected| Bi-amp:
Pin 1+: LF-F Pin 1-: LFPin 2+: HF+
.Pin 2-: HF-
Power Handling| Passive: 300 W (RMS), 2800 W (peak)
Bi-amp, LF: 300 W (RMS), 2800 W (peak)
Bi-amp, HF: 45 W (RMS), 720 W (peak)
Nominal Impedance| Passive or bi-amp, LF/HF: 8 (2
Dimensions (height x width x depth)| 47.7 cm x 47.7 cm x 38.3 cm (18.0 in x
18.0 in x 15.0 in)
Net Weight| 22.04 kg (48.60 lb)
©2020 Bose Corporation, All rights reserved.
Framingham, MA 01701-9168 USA
PRO.BOSE.COM
AM858222 Rev. 00
October 2020
References
- Bose Professional
- Bose AMM112 Loudspeaker | Bose Professional
- Bose AMM112 U-Bracket | Bose Professional
- Bose AMM Suspension Bracket | Bose Professional
- Warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>