Mamibot FLOMO I Multi-Surface Floor Cleaner User Manual

: June 7, 2024
: Mamibot

Multi-Surface Floor Cleaner
FLOMO I
USER MANUAL

Thanks for purchasing Mamibot Multi-Surface Floor Cleaner FLOMO.
We hope FLOMO will bring you a smarter and more convenient lifestyle.
If you encounter any problem not mentioned herein, please contact sales@mamibot.com.
For more details, please visit our official website: http://www.mamibot.com.

Mamibot FLOMO I Multi-Surface Floor Cleaner

Please read all instructions before using this product, and keep it properly for future reference.

Safety Instructions

This product is for home use. Please do not use it outdoors.
Do not disassemble, repair or refit Flomo I without authorization.
Do not modify or attempt to repair Flomo except as indicated in the manual for use and care.
Do not use the product in an environment with risk of fire or explosion.
Do not use Flomo to pick up flammable materials, such as gasoline, lighter fluid.
Do not use Flomo to pick up toxic material.
Do not use Flomo to pick up foam liquids.
Do not use Flomo to pick up the paint, pigments, and corrosive liquids.
Do not use Flomo to pick up hard or sharp objects, such as nails, screws, glass.
Do not use Flomo to pick up the things that is burning or smoking, such as hot ashes, cigarettes.
Do not put any object into openings, keep openings free of dust, hair, and anything that may reduce airflow.
Do not wash or soak the main body and electronic accessories in water.
Do not allow metal and conductive materials to contact the battery.
Do not allow to be used a toy. Close attention is necessary when used by or near children.
Do not touch the charging plug and docking station with wet hands.
Always should be protected from long-term exposure to sunlight.
Do not place Flomo near cigarette butts, lighters or other open fires.
Keep hair, fingers, and other parts of the body away from openings and moving parts of the appliance.
Only the original power adapter can be used.
When the metal part of the power plug is dusty, please wipe it with a dry cloth.
The power adapter is applied to a 100-240V AC voltage. Please plug into the socket properly and keep away from children.
The operating temperature of the product ranges from 0℃-40℃; please do not use it in a high-temperature environment.
Plastic film can be dangerous, please keep away from babies and children.
Please unplug the charger from the electrical socket when not in use or before cleaning.
Please keep Flomo away from the metal objects, such as coins, paper clips when the battery pack is not in use.
Do not put the lighting UV-C Lamp toward any human body or animals. Use appropriate shielding on the UV-C lamp or make sure that the UV-C lamp went out when checking.
Do not use a battery pack that is damaged.
Do not block the air inlet or air outlet in case of overheating.
Do not shake Flomo hard in case the dirty water goes into the vacuum motor.
The battery pack and charging station output terminals are not to be short-circuited.
Please remove the battery from Flomo I before Flomo is scrapped.
Please empty it in time when the dirty water box is full.
Please ensure Flomo is upright when moving Flomo in case the dirty water goes into the vacuum motor.

To know your Flomo

What’s in the Package?

Mamibot FLOMO I Multi-Surface Floor Cleaner -

Accessories may be slightly different, the pictures are for reference, please subject to the actual received products or confirm with the seller.

Specification

The data comes from the lab of Mamibot Manufacturing USA Inc. It may be slightly different with the user’s data due to different usage or working environment, please be subject to the actual products.
For continuous products improvement. we reserve the right to any technical and design change without prior notice.

Product View

Mamibot FLOMO I Multi-Surface Floor Cleaner - Product
View Mamibot FLOMO I Multi-
Surface Floor Cleaner Brush Base

Digital Display

Mamibot FLOMO I Multi-Surface Floor Cleaner - Digital
Display

| The indicator will light up white when Flomo is in Eco Mode.
---|---
| The indicator will light up white when Flomo is in Max Mode.
| It shows the Working Time from “Switch on” to “now”.
| The indicator will light up white when the UV lamp is working.
| The indicator will flash RED slowly when Clean Water Tank is short of water,
please fill up with clean water.
| The indicator will flash RED slowly when Dirty Water Tank is full, please empty
the Dirty Water Tank in time.
| Press the Self-Cleaning Button, the indicator will flash white slowly, and
Flomo will enter the self-cleaning mode.
| Battery Indicator, the indicator will flash white slowly when charging, it
will stop flashing after fully charged.

The indicators and the display may be slightly different from the final product, please subject to the actual product.

Operations

Assembly

Take out the Handle, Main Body, Li-ion Battery Pack, Clean Water Tank, Dirty Water Tank Set, Roller Brush, Charging Station, Drying Tray, Cleaning Tool from the package.
Insert the Handle into the Main Mody of Flomo until you hear a click.
Turn over the Clean Water Tank, insert it into the Main Body along with the Clean Water Tank Slot until you hear a click.
Press the Release Button of the Li-ion Battery Pack, then put the Battery Pack into the Battery Slot, and push it up slightly until you hear a click.
Align the bottom of Dirty Water Tank with the inlet, then push it inwards until you hear a click.
Insert the Roller Brush into the base of the brush, rotate the Roller Brush so that the brush can align with the brush, meanwhile, make sure that the lock can align with the lock hole, then lock the Roller Brush.

Filling up the Clean Water Tank

The cleaning water tank is located on the back of the main body, use your fingers to grab the top of the water tank and pull it upwards to remove it.
Unscrew the water cap counterclockwise as below and add some water, then screw it and insert the Clean Water Tank into Flomo.
• Please do not screw the cap too tightly or too loosely, or the cap may be broken or the water tank will be leaking.
• Users can also add some cleaning solutions which are noncorrosive or flammable liquid to clean the floor, DO NOT add dirty water into the clean water tank.
• It is normal if there is some water in the water tank at the first use, tests and inspections are proceeded before goods leaving factory,

Mamibot FLOMO I Multi-Surface Floor Cleaner - leaving
factory

Charging the Flomo I

Insert the Drying Tray into the charging station as below.
Place the charging station against the wall at your convenience, plug the DC power socket of the adapter into the DC power socket of the charging station, then plug the adapter into the outlet of electricity.
Charging:
A). Place the Flomo on the charging station and plug the adapter, then start charging.

B). Remove the Li-ion Batter Pack from the main body, and charge it directly.
** Please charge Flomo for 12 hours for the first time.

Cleaning Floors with Flomo

Check the Handle, the Clean Water Tank, the Dirty Water Tank, the Li-ion Battery Pack, the Roller Brush, make sure all of them are installed correctly and tightly.
Press the Switch Button on the Handle to turn on the Flomo. Press the Max Mode Button to switch the suction power.
**** Important tips:
**
• Please choose the Hard Roller Brush for areas with short rug if you ordered the Hard Roller Brush.
• Please DO NOT use Flomo in the LONG rug areas.
• Please DO NOT use Flomo in the delicate rugs, silk or similar floors.
• Please DO NOT SPRAY on the rugs.
Hold the Spray Button for 8 seconds to prime the cleaning water/solutions before each use. Spray the water according to your personal use during the cleaning.
Hold the handle and pull the Flomo forward and backward to clean your floors.
The angle range of handle tilt must be within 60.5 degrees (up and down), please do not shake it in use.
Please clean the Dirty Water Tank after each use of cleaning.
** Important tips:
• Please DO NOT run over the edges of the rugs.
• The UV lamp will work automatically if you choose the version with the UV lamp. The UV lamp will stop working when turning off the Flomo or it detects that the floor brush set is off the floor. Please
DO NOT expose the human or animals to the UV Lamp in case of any Ultraviolet radiation.
• The Dirty Water Tank must be cleaned as soon as the cleaning work is finished, or it will be stinky.
• DO NOT turn the main body over before cleaning the Dirty Water Tank, or the dirty water will flow into the vacuum motor and damage Flomo.

Self-Cleaning

Flomo can clean the roller brush and pipeline automatically on Self-Cleaning Base:

Please make sure there is enough clean water in the clean water tank, empty the dirty water tank before self-cleaning.
Place Flomo on the charging station(1), plug in the power supply well.
Press the Self-Cleaning button(2), the indicator will flash white slowly, and Flomo will spray the clean water, clean the roller brush and pipeline automatically, meanwhile, it will vacuum the dirty water into the dirty water tank.
Please unplug the power supply and clean the dirty water tank once the self-cleaning mode is finished avoiding it get stinky.

Mamibot FLOMO I Multi-Surface Floor Cleaner - water
tan2k

Attention: Please make sure the Dirty Water Tank, the HEPA, and filter are properly installed when do self-cleaning.

Care and Maintenance

Please unplug the power supply, turn off the switch and remove the battery pack out before care and maintenance.

For daily care and maintenance, use a soft dry mop to wipe the main body, the charging station; use a soft moist mop to wipe the brush base, scraper, infrared sensor.
Roller Brush Cleaning

Release the lock button of the roller brush, rotate the brush counterclockwise, then pull the brush out, clean the brush, and brush guard with a cleaning tool.
Dirty Water Cleaning

1). Press the Release Button of Dirty Water Tank, and take the Dirty Water Tank out. Take out the HEPA, the Cap, and the strainer,
2). Pour the debris into the dustbin, pour the dirty water into the washbasin. Clean the dirty water tank, the strainer and the cap, the HEPA with clean water.
Charging Station & Drying Tray Cleaning
1). Unplug the power supply and take the main body out before cleaning.
2). Pour out the dirty water of the Charging Station, use a soft dry mop to wipe the charging station and Drying Tray.
Storage
1). Please dry the main body, clean water tank, dirty water tank, brush base, HEPA, Strainer, Charging Station, drying tray, then store them.
2). The roller brush can be stored in the drying tray.
****Notice:**
• The Dirty Water Tank must be cleaned and dried after each single cleaning to avoid mildew or smell.
• The machine must be stored in a dry and ventilated place without heat sources.
• Please keep the machine away from direct sunlight.
• The battery pack should be fully charged every 3 months at least to avoid battery damage.

Cleaning / Replacement Frequency Recommended

Part	Cleaning / Replacement Frequency Recommended
Clean Water Tank	Cleaning after each use.
Dirty Water Tank	Cleaning after each use.
HEPA	Cleaning after each use; Replacement every 3-6 months
Filter	Cleaning after each use.
Strainer	Cleaning after each use.
Brush Guard	Cleaning after each use.
Infrared Sensor	Cleaning after each use.
Roller Brushes	Cleaning after each use; Replacement every 3-6 months.
Drying Tray	Cleaning after each use.
Charging Station	Cleaning after each use.
Scroll Wheels	Cleaning every month

Note:
The above frequency is only for your reference. The final cleaning/replacement frequency should depend on the usage.

Trouble Shooting

Problems/Error Codes	Possible Reasons	Solutions
Pomo can not be charged.	•The power supply does not! connect we).
•Pomo is not careful well with charges stolen.	•Please check the connection

of the Power supply.
•Please replace Elmo on the charging stolen
The handle control does not work.| •the battery Cadabby is low.
•The handle does not connect welt.| •Pease check the battery =docily and charge if fully.
•Pease reinstall me tionde.
Roma doesn’t wart.| •The Dirty Wale, Tont is a lull.
•The Dirty Water lank is not instated.
•The Roller Brunt is not instated.| •Pease empty the Duly Water forty
•Please check and halal the hay Wafer Tort
•Pease check and inlet the Rater Brush.
The indicator display of Clean Water Tare is incorrect.| •Uncalbrated.| •Take on the Clean Wale lank. then stop Roma and Spray. Mn Aunts off =HIdecking the pipe. Then press the ‘Switch Button” and ‘Ecoimay Button’tor Seconds until the digital display Bash Iwo limes. then check again.
The view is weakness than ever when cleaning.| •the Hero is blocked.
•the Hepa is wet.
•the Scrapper is not instated wet.| •Please check and clean the Hepa.
•Please dry the Hepa fist.
•Please check and re-install the scraper.
The Clean Water Tank is leaking| •The Clean Water volume is higher than the snuffle valve.
•The Clean Water Tank is not instated wet.
•The cap is not screwed wet| •Pour out some water until the volume is lower than the snuffle valve.
•Please the tank.
re-install water
•Please screw the cap weL
No water comes out when spray water.| •The Clean Water Tank is empty.
•The Clean Water Torok is not installed wet.| •Please fit up the Clean Water Tank.
•Please re-install the water tank.
No voice| •The voice switch is off.
•your version excludes voice.| •Tun on the voice switch.
•Please check and confirm with the local seller.
Pomo does not work in Self-Clearing Mode| •Roma does not connect with the Power supply.
•The Dirty Water Tank is full.
•There is a shortage of Clean Water Tank.| •Please check and connect with the power supply weL
•Please empty the Oily Water Tank.
•Please fit up the Clean Water Tank.
Therese water bad at air collet| •The Hepa is not instated.
•Plano was tilted had.
•Ram vacuums the foam liquid.| •Please check and install the HEM.
•Use the machine correctly.
•Empty the Dirty Water Tank in time.
Porno I shake hard.| •The Roller Brushed is not instated well.| •Please check and re-install the Rater Brush as a guide.
Always gel alarm -empty the water tank-.| •The HEPA is blocked.
•The Dirty Water tank’s Net.| •Please clean the HEPA.
•Please empty the Dirty Water Tonic.

Error Codes	Possible Reasons	Solutions
FF:01	Overvoltage in Charging.	Replace the Adapter.
FF:02	Over-current in Charging.	Replace the Adapter.
FF:03	NTC Open-circuit/Short-circuit.	Replace the Battery Pack.
FF:04	Internal cable disconnection of Battery Pack.	Replace the Battery

Name and Contact of Hazardous Substances

Component	Content of Hazardous Substances
Plastic Shell	PCB
Electronic Components	Rubber Components
Cadmium(Cd)	0
Lead(Pb)	0
Mercury(Hg)	0
Hexavalent Chromium (CrVI)	0
Polybrominated Biphenyls(PBB)	0
Polybrominated Diphenyl Ethers (PBDE)	0
Bis(2-ethylhexyl) Phthalate(DEHP)	0
Butyl Benzyl Phthalate (BBP)	0
Dibutyl Phthalate (DBP)	0
Diisobutyl Phthalate (DIBP)	0

The time of the components for environment protection concern is 10 years. The time is valid under the use conditions of this manual.

O: It indicates that the content of the hazardous substances in all homogeneous materials of the components is in compliance with the council RoHS 2 Directive (EU) 2015/863 and (EU) 2017/2102 amending Annex II to Directive 2011/65/EU.
X: It indicates that the content of the hazardous substances in all homogeneous materials of the components is the exempt item according to the council RoHS 2 Directive (EU) 2015/863 and (EU) 2017/2102 amending Annex II to Directive 2011/65/EU due to the existing level of technology.

Recycling

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
The product meets all the necessary requirements of the EU directives applicable to the specific product.
The product complies with the emission levels based on the rules of 47 CFR Part 15 Subpart B.

We reserve the right to changes in the text, design, and technical specifications which are subject to change without prior notice.

Manufacturer:
Mamibot Manufacturing (Shanghai) Co.,Ltd.
21st FL, No 1st, LN1040 Caoyang Rd, Shanghai, 200063. P.R.C.
Supervised by
Mamibot Manufacturing USA Inc.
One Commerce Center, 1201 Orange St, Wilmington, DE 19899 USA
Tel: 001 302-428-9888 sales@mamibot.com www.mamibot.com