LAX MAX LK-SPM70 Portable Speaker User Manual

LAX MAX LK-SPM70 Portable Speaker

Product Information

Portable Speaker

The Portable Speaker is a wireless audio device that allows you to enjoy your favorite music and audio content on the go. It is designed to provide high- quality sound in a compact and portable form factor.

The speaker is compliant with the FCC radiation exposure limits, ensuring safe usage in an uncontrolled environment. It is important to note that this speaker should not be co-located or operated in conjunction with any other antenna or transmitter.

Product Usage Instructions

1. Power On/Off: To turn on the speaker, press and hold the power button until you see the indicator light. To power off, repeat the same step.
2. Pairing with a Device: Enable Bluetooth on your device and search for available devices. Select the “Portable Speaker” from the list of available devices to establish a connection.
3. Volume Control: Adjust the volume by pressing the volume up (+) and volume down (-) buttons located on the speaker. You can also control the volume from your connected device.
4. Play/Pause: Press the play/pause button to start or pause audio playback.
5. Next/Previous Track: To skip to the next track, press the next track button. To go back to the previous track, press the previous track button.
6. Auxiliary Input: If your device does not support Bluetooth, you can connect it to the speaker using the auxiliary input. Simply plug one end of the audio cable into your device’s headphone jack and the other end into the auxiliary input port on the speaker.
7. Battery Charging: Use the provided USB cable to connect the speaker to a power source for charging. The indicator light will turn on during charging and will turn off once the battery is fully charged.
8. Battery Life: The speaker offers a battery life of up to 10 hours on a full charge. Actual battery life may vary depending on usage and settings.

Congratulations on purchasing the Lax-Max Wireless Portable Speaker Please read this Instruction manual prior to using this unit.

For additional information and troubleshooting, please refer to the complete user manual or contact our customer support.

Control Panel

1. Short press to select previous track in Bluetooth/USB/TF Card Modes. Select previous preset frequency in FM mode. Long press to decrease the volume.
2. + : Short press to select next track in Bluetooth/USB/TF Card Modes. Select next preset frequency in FM mode. Long press to increase the volume-
3. : Play or Pause in Bluetooth/USB ITF Card Mode. When in FM mode, short press to scan for available frequencies.
4. MODE/TWS. Toggle between source Bluetooth/USB/ TF Card/ FM Radio. When in Bluetooth mode. long press will be in TWS mode.
5. : Turn ON/OFF Unit’s power supply. Short press to answer/hang up phone call.
6. TF Card Slot: Insert TF card to listen stored tracks.
7. Aux Input: Connect external media player ustng 3.5mm line in cable.
8. USB Slot: Insert USB Drive to listen stored tracks.
9. DC SV IN: use included charging cable to charge unit. (Adaptor not included).

Features:

• Wireless Connection
• TWS Function
• support USB’TF card
• FM Radio
• Aux Input
• Hands — Free Function
• I PX Waterproof

Accessory

USB Charging Cable: 1 piece
Carrying Strap: 1 piece

Bluetooth Connection

• TVVS connection: TWS connection is only for two active speakers of same model. cannot support quantity over 2 PCS.
• Turn on two same speakers, press the MODE button to switch to BLUETOOTH mode for both speakers.
• Long press the MODE (TWS) button on one speaker. Then two speakers will automatically connect together.
• Pair your Bluetooth: use your device to search and connect for nearby Bluetooth devices.

USB/TF Card

• Insert the USB or TF card into the USB/TF slot, It will read the MP3 format music automatically.
• Press to Play’Pause, Short press – and* to Prev. and Next. long press — the and + buttons to decrease and increase the volume.
  Warning: When the rear nap is open. this speaker is not protected from water. Please make sure the rear nap is closed when near water or inside the rain.

FM RADIO

• Press the MODE button to change to FM radio mode.
• Press the button to scan for available frequencies.
• Once it is done scanning. you can short press – or + to move forward or backward. Long press the – and + buttons to decrease and increase the volume.
  Noted: When in FM mode connect the included USB charging cable to the unit as an external antenna for scanning FM radio stations

AUX MODE

• Use 3.5mm Aux cable
• Connect one end of the cable to the AUX port Of the speaker and the other end to your audio device.
• You can now play your music.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 Of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harrnrul interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation- If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment Off and on. the user is encouraged to try to correct the interference by one or more Of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a Circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 Of the FCC rules. Operation is subject to the following two conditions
(1 )this device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any Other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>