PILOTAGE B0CQJXXF9H 2.4G Air Mouse Remote Control Instruction Manual
- June 16, 2024
- PILOTAGE
Table of Contents
PILOTAGE B0CQJXXF9H 2.4G Air Mouse Remote Control
Product Diagram
- Power
- Button to turn on/off the device.
- LED
- Indicates device status and pairing.
- Mute
- Button to mute the volume.
- Browser
- Button to open web browser.
- Cursor Lock
- Button to lock/unlock the cursor.
- OK
- Button for selecting options.
- Return
- Button to return to the previous menu.
- Home
- Button to return to the main menu.
- Voice Key (Optional)
- Button to activate voice commands.
Operating Instructions
- Pairing: Press the “PG-” and “V-” on the panel at the same time. If the LED red light flickers fast, insert the receiver to the computer or the ANDROID device USB interface. If the LED light is powered off, pairing is successful (Paired successful when out of factory).
- The function of the key:
- CURSOR LOCK: Short press to lock the cursor, and then return the cursor state. (Optional)
- HOME: After entering the sub-menu you can back to the original main menu directly.
- RETURN: You can press the Return key to put the unit into last interface.
- In the sate of PC the “OK” is the left key of the mouse and “Return” is the right key. Press “HOME” can open the internet by this key.
Cursor Speed Regulation
- From slow to fast: Press “OK” and “VOL+” at the same time, the speed of cursor pointer will be faster.
- From fast to slow: Press “OK” and “VOL-” at the same time, the speed of cursor pointer will be slower.
Parameters of the Product
Feature | Specification |
---|---|
Wireless IC | 3-Gyro + 3-Gsensor (Optional) |
Amount of key | 16 |
Control distance | >10m |
Battery distance | AAA x 2 |
Working Power | Less than 10mA in the work condition |
Standby Power | Micromaopere, almost no power, in line with the European |
“Energy Star” environmental standard
Material| Plastic and Silicone
Color| Black
Size| 1584114 MM
Weight| About 47g
Working State Instruction
- While the controller in the state of working condition, press any key the LED light will flash. Loosen the finger, the LED light will be off.
FAQ
- How do I pair the air mouse with my device?
- Press the “PG-” and “V-” buttons simultaneously until the LED light flickers fast, then insert the receiver into the device’s USB interface. If the LED turns off, pairing is successful.
- What do I do if the cursor is moving too fast or too slow?
- To increase cursor speed, press “OK” and “VOL+” at the same time. To decrease it, press “OK” and “VOL-” simultaneously.
- How can I return to the main menu or the last interface?
- Press the “HOME” button to return to the main menu, or the “RETURN” button to go back to the last interface.
- What should I do if the air mouse is not working?
- Check if the device is properly paired and that the batteries are not depleted. If issues persist, consult the product’s support resources.
Product diagram
Operating instructions
-
Paring: Press the “PG-” and ” V – ” on the panel at the same time , if the LED red light flickers fast ,insert the receiver
-
Infrared learning
(Only the power button can be learned) -
Press and hold the power button for 3 seconds to enter the infrared learning mode.After the flying mouse is aligned with the two ends of the TV remote control, press power button of the TV remote control, then press the power of the flying mouse Source key, you can learn success. to the computer or the ANDROID device USB interface. If the led light is powered off, paring is successful ( Paired successful when out of factory )
-
Function of the key
- CURSOR LOCK: Short press to lock the cursor, and then return the cursor state. (Optional)
- HOME: After entering the sub-menu you can back to the original main menu directly.
- RETURN:You can press the Return key to put the unit into ast interface.
In the sate of PC the “OK” is the left key of the mouse and “Return” is the right key. Press “HOME” can open the internet by this key.
Working state instruction
- While the control ler in the sate of working condition, Press any key the LED light will flash. Loosen the finger, the LED light will be off.
- Cursor speed regulation
- From slow to fast: Press “OK” and “VOL+” at the same time, the speed of cursor pointer will be faster.
- From fast to slow: Press “OK” and “VOL-” at the same time, the speed of cursor pointer will be slower.
Parameters of the product
- Wireless IC: 3-Gyro + 3-Gsensor (Optional)
- Amount of keys: 16
- Control distance : I Om
- Battery distance: AAA x 2
- Working Power: Less than I OmA in the work condition
- Standby Power: Microampere, almost no power, in line with the European “Energy Star” environmental standard
- Material: Plastic and Silicone
- Colour: Black
- Size: 15841 14 MM
- Weight: About 47g
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>