behringer EUROLIVE B15X/B12X Active PA Speaker User Guide

: June 7, 2024
: Behringer

Table of Contents

Important Safety Instructions
EUROLIVE B15X/B12X Hook-up
EUROLIVE B15X/B12X Controls
EUROLIVE B15X/B12X Getting started
Bluetooth Connection
DSP Menu
Specifications
Other important information
Documents / Resources

Quick Start Guide

behringer EUROLIVE B15XB12X Active PA Speaker

EUROLIVE B15X/B12X
1000 Watt 2 Way 15″/12″ Powered Loudspeaker with Digital Mixer, Wireless Option, Remote Control via iOS / Android Mobile App and Bluetooth Audio Streaming.

Important Safety Instructions

Caution

Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modifications should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.
Caution
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
Do not install in a confined space, such as a bookcase or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

EUROLIVE B15X/B12X Hook-up

Step 1: Hook-Up

Singer-songwriter hookup with a smartphone streaming audio over Bluetooth.
Smartphone streaming audio over Bluetooth with Behringer wireless microphones.

behringer EUROLIVE B15XB12X Active PA Speaker - Hook-
Up

EUROLIVE B15X/B12X Controls

Step 2: Controls

behringer EUROLIVE B15XB12X Active PA Speaker -
Controls

LCD SCREEN displays the current DSP module and parameter settings.
ENCODER KNOB controls volume when the default DSP menu is active.
Press the encoder knob to access DSP sub-menus and parameters. When the sub- menus are active, rotate the knob to change parameters.
WIRELESS SYSTEM LED s indicate wireless microphone signal input.
WIRELESS SYSTEM USB input accepts only the Behringer wireless microphone receiver.
NOTE: The wireless USB input works in parallel with the INPUT A/B analog inputs, which means the wireless microphone signal can be heard at the same time as audio coming in through the INPUT A/B connections. We recommend you unplug the INPUT A/B connections in order to hear the wireless microphone signal alone.
INPUT A/B combo jacks accept input signals over XLR balanced, ¼” TRS balanced, or ¼” TS unbalanced connectors.
MIX OUTPUT jack sends a combined signal from all inputs (INPUT A/B jacks, wireless microphone, and Bluetooth) out over a balanced XLR connection.
POWER SOURCE jack accepts the included IEC cable.
POWER switch turns the unit off and on.

EUROLIVE B15X/B12X Getting started

Step 3: Getting started

Connect the B12X/B15X to a power outlet by using the included IEC power cable.
Connect an all-analog microphone and/ or instrument cables to their respective input jacks. Make sure all outboard audio gear is switched off for now.
Power up the B12X/B15X by pressing the POWER switch to the “on” position. The startup screen will appear on the LCD display.
Reduce the volume by rotating the ENCODER KNOB counter-clockwise until the VOLUME setting shows “MUTE” on the LCD screen.
Mute all audio inputs by going to the INPUT screen and reducing the gain for each input with the ENCODER KNOB until each input displays the “Mute” setting.
If you are using Behringer wireless microphones, plug the wireless dongle into the WIRELESS SYSTEM USB input. The WIRELESS SYSTEM LEDs will light up when the wireless microphones become active.
Power up any outboard audio gear connected to the B12X/B15X.
Raise the volume back up to a low-to-medium setting in the VOLUME screen to begin setting input levels.
Set microphone levels by going back to the INPUT screen. Speak or sing into each microphone while raising each mic’s respective gain level (A or B) with the ENCODER KNOB until you find a comfortable gain level that does not distort the audio signal. The level indicator bar will help to find a suitable input gain. Please avoid clipping the input signal.
If you intend to stream Bluetooth audio, go to the Bluetooth Streaming section of this Quick Start Guide and follow the setup instructions.
Set Bluetooth levels by going to the INPUT screen and raising/lowering the BT gain setting until you find comfortable level settings. Do not forget to turn on the volume on the sending BT device.
Go to the MODE screen and choose an equalization preset that suits your needs (Music, Live, Speech or Club).
Go to the EQ screen and adjust the Bass, Mid, and Treble settings if you wish to make your own adjustments.
Make final volume adjustments by going to the VOLUME screen and rotating the ENCODER KNOB until you find the desired final volume level.

Bluetooth Connection

To stream audio from a Bluetooth-enabled device, you will need at least one B12X/B15X speaker and an iPad/iPhone/Android/Windows device with basic Bluetooth connectivity. With a streaming-only Bluetooth connection, all related B12X/B15X DSP functions must still be controlled directly from the B12X/B15X rear panel via the rotary encoder.
For Apple iOS or Android devices, you can also download our dedicated Behringer Live Control app from the App Store. The app allows you to fully control a single or stereo pair of B12X/B15X speakers, including all DSP functions, remotely from your iOS or Android device (see “Bluetooth Control” below for more information).
*iPad and Apple are trademarks of Apple Inc. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Bluetooth Streaming
To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.):

Mono Operation

Enable Bluetooth on your remote device.
Switch on your B12X/B15X speaker and minimize the volume.
Select “Pair device” from the B12X/B15X speaker’s Bluetooth menu.
Check that your remote device is searching for a connection.
Once your device detects the B12X/B15X speaker, select the B12X/B15X speaker from your remote device’s menu (e.g., “Behringer B12X”).
Wait until the remote device shows an active connection, and then check the speaker’s Bluetooth menu, which should display the name of the remote device (e.g., “Xperia Z5 Compa”).
Bluetooth music can now be streamed to your B12X/B15X speaker. The stereo signal will automatically mix down to mono.
The B12X/B15X speaker will display the Bluetooth indicator on the main, top-level DSP screen.

Stereo Operation

Complete the steps above to connect the first speaker to Bluetooth audio.
The first connected speaker automatically becomes the MASTER speaker.
Switch on the second speaker, which becomes the SLAVE speaker.
Select “Link speaker” from the SLAVE speaker’s Bluetooth menu.
The SLAVE speaker will display “Slave linking…”
Select “Link speaker” from the MASTER speaker’s Bluetooth menu.
The MASTER speaker will display “Master Linking…”
Wait for the speakers to link.
Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will receive the right channel.
MASTER and SLAVE connections will be indicated on the main, top-level DSP screens.

Bluetooth Control
A dedicated iOS/Android Live Control app for Behringer Bluetooth-enabled speakers can be downloaded from the Apple Store and Android market.
When connected with a B12X/B15X speaker, the Live Control allows full remote control over all DSP functions, including Bluetooth streaming. Bluetooth streaming can be done in parallel with analog audio and sent to both mono and stereo setups.

In both mono and stereo mode, first, pair the MASTER speaker, and then launch the control app.
If the Live Control app is connected to the speaker, you will see the following DSP screens:
The Live Control app will automatically detect and adapt for mono or stereo mode.
To alter the speaker settings, swipe the screen or press the settings icon. All B12X/B15X speaker settings can be accessed from the control app.

Operation with Bluetooth Pairing and Audio Streaming

In both mono and stereo mode, first, pair the MASTER speaker, and then launch the Live Control app.
The Live Control app will automatically detect and adapt for mono or stereo mode.
To alter the speaker settings, swipe the screen or press the settings icon. All B12X/B15X speaker settings can be accessed from the Live Control app.

Setting Up the Live Control App Connection

Power on the first (usually left-hand) speaker. This speaker will become the MASTER speaker.
Start the Live Control app on the IOS/Android device.
Check that the Live Control app is connected and functioning with the single MASTER speaker.
Power up the second speaker. This speaker will become the SLAVE speaker.
Check that the main app page shows both MASTER and SLAVE input and balance control.

behringer EUROLIVE B15XB12X Active PA Speaker - Control App
Connection

Firmware Update via App
Where possible please update your B12X/B15X firmware using the Live Control app.
To update, go to the Settings Page in the app and look for the “CURRENT FIRMWARE” section. The Live Control app will detect the current firmware version. If a firmware and automatically check for updates provided that the remote device has access to the Internet. If a newer firmware version is available the app will offer to download. For example: behringer EUROLIVE
B15XB12X Active PA Speaker - Firmware Update via Appl

Swipe the updated slider toward the right to initiate the firmware update. The update may take several minutes.
Update progress will be displayed on the app and the B12X/B15X speaker’s LCD screen.

Firmware Update Fallback Procedure
In the event that the system cannot be updated using the Live Control app, you may also carry out the update using this fallback procedure:

Download the .dfu file with the new firmware version to your remote device from the download section of the respective Behringer product page.
Prepare the B12/15X for a Firmware upgrade by following these steps:
a. Power off the speaker.
b. Hold the ENCODER KNOB.
c. Power on the speaker. You will see the following screen:d. Please select the option “Firmware upgrade” then press the ENCODER KNOB.
e. The B12X/B15X is now ready for the firmware upgrade.
On your remote device, select and hold the .dfu file until a pop-up window offers options for file transfer.
Select the option for sharing via Bluetooth. (NOTE: Some devices need to be paired with the speaker before file transfer.)
Select the B12X/B15X speaker for file sharing via Bluetooth.
During the file transfer, the LCD screen will display the download progress.
After the file transfer is complete, the B12X/B15X speaker will automatically restart and return to the usual startup screen.

Specifications

| B15X| B12X
---|---|---
Amplifier
Maximum output power| 1000 W| 1000 W
Type| Class-D| Class-D
Protection| Short circuit, open circuit, thermal| Short circuit, open circuit, thermal
Controls
Hardware| Rotary push-encoder| Rotary push-encoder
Software| Apple iOS / Android interface via Bluetooth| Apple iOS / Android interface via Bluetooth
Loudspeaker / System Data
Woofer| 385 mm (1 x 15″) LF driver| 307 mm (1 x 12″) LF driver
Tweeter| 25.4 mm (1 x 1″) HF compression driver| 25.4 mm (1 x 1″) HF compression driver
Frequency response| 50 Hz – 20 kHz (±3 dB)| 55 Hz – 16 kHz (±3 dB)
Nominal dispersion| 45 Hz – 20 kHz (-10 dB)| 50 Hz – 20 kHz (-10 dB)
Maximum SPL| 85 °H X 60° V @ -6 dB| 85 °H X 60° V @ -6 dB
Crossover| 127 dB| 127 dB
Limiter| 2-way, active| 2-way, active
Audio Connections
Input A / B| 2 x XLR / ¼” TRS combo jacks (servo-balanced)| 2 x XLR / ¼” TRS combo jacks (servo-balanced)
Impedance| 33 kΩ, balanced / 16 kΩ, unbalanced| 33 kΩ, balanced / 16 kΩ, unbalanced
Sensitivity| 4 dBu, nominal| 4 dBu, nominal
Max. input level| +22 dBu| +22 dBu
Output| 1 x XLR| 1 x XLR
Impedance| 440 Ω balanced, 220 Ω balanced| 440 Ω balanced, 220 Ω balanced
Max. output level| +22 dBu| +22 dBu
Digital Signal Processor (DSP)
Display| LCD 128 x 32, amber backlit| LCD 128 x 32, amber backlit
Factory EQ presets| Positioning, sound mode, phase| Positioning, sound mode, phase
Equalization
Bass| ±10 dB @ 80 Hz, shelving| ±10 dB @ 80 Hz, shelving
Middle| ±10 dB @ 2.5 kHz, parametric, Q = 0.5| ±10 dB @ 2.5 kHz, parametric, Q = 0.5
Treble| ±10 dB @ 12 kHz, shelving| ±10 dB @ 12 kHz, shelving
Crossover| High pass, L-R 24 dB/oct.| High pass, L-R 24 dB/Oct.
Protection| Lockout function for all settings| Lockout function for all settings
Wireless System
USB dongle| USB socket accepts signals from 2 independent Behringer ULM mics| USB socket accepts signals from 2 independent

Behringer ULM mics

*Independent of limiters and driver protection circuits.
**The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Music Tribe is under license.

Other important information

Important information

Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Behringer
EUROLIVE B15X/B12X

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street, Las Vegas NV 89118, United States

Phone Number: +1 702 800 8290

EUROLIVE B15X/B12X
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:

This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/53/EU,
Directive 2014/30/EU, Directive 2014/35/EU, Directive 2011/65/EU, and Amendment 2015/863/EU,
Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

We Hear You