LONOVE 112 LCD Digital Endoscope User Manual

LONOVE 112 LCD Digital Endoscope User Manual

SAFETY WARNING:

WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury

WELCOME:

Welcome to buy this product. Before use, please read the instructions carefully. This product is a utility class equipment with the function of real-time video viewing, video recording and picture capturing, etc.. which is suitable for usage in a narrow area and the area which cannot be observed by sight, such as: vehicle repair, sewer inspection/maintenance, etc

FEATURES:

1. 4.3-inch full color LCD screen for real-time viewing of test videos
2. Resolution up to 1080P for image capturing, video recording
3. 360°image rotation
4. TF card can be installed to achieve file storage function (TF card is included in the product)
5. 8.0 mm diameter high-sensitivity waterproof camera with clear picture quality for different working environments
6. Special technology with a focal length of 4 cm – 500 cm
7. Screen separation control port, making it easy for customers to apply to different locations
8. Auxiliary lighting, 6 adjustable LED lights for easy operation in dark environments
9. 

APPLICATION:

1. Tubular/Water Pipe Cleaning: It helps to clean, rust, corrosion, dust and crack after the pipe is inspected.
2. Shipbuilding industry: used to inspect boilers, steam turbines, car engines, pipelines.
3. Industrial machinery: used to check for engine scars or wear, gearboxes, hydraulic systems, greatly reducing downtime.
4. Electronics, electronics industry: used to confirm the wiring status of the product,

ACCESSORIES LIST:

1. LCD Digital endoscope
2. User’s Guide
3. USB data cable
4. Accessories – hooks, magnets, side mirrors, protective cap
5. A TF Card

FEATURES:

(1) Part name and function

1. MicroTF card slot
2. USB charging port
3. Hose
4. Camera
5. 4.3 inch display
6. Capture button
7. Back key / file view
8. OK button
9. Down button
10. Setting button
11. Led light adjustment button
12. Up button
13. Power button
14. Indicator light

(2) Function introduction

1. Micro TF card slot: supports up to 64GB MicroTF card,Only supports TF cards with class 10 or higher FAT32 format.
2. Micro seat: 5V power supply.
3. Switch button: long press for 3 seconds.
4. Photo button: short press to take a photo, long press the video, then press once to stop.
5. Menu button: Short press to enter the menu page, where you can set the resolution / date / time / date label / brightness / formatting / language settings / default settings / version
6. Up button: Photo mode, up and down. Other modes, move up or left
7. Down button: Photo mode, rotate left and right. Other modes, move down or right
8. OK button: short press to confirm
9. Back button: short press to return to the previous menu
10. LED brightness adjustment button: camera brightness is divided into three levels of adjustment
11. Indicator light: The charging indicator on the left is always red when charging, and automatically turns off when fully charged. On the right is the power-on indicator, and the blue light is on after the power is turned on.

INSTALLATION NOTES:

(1) Installation hose

Install the flexible tube onto the handle by first making sure that the hose arrow is aligned with the arrow groove of the handle and forcibly connecting the two parts

(2) Installation accessories

How to install the three accessories – the hook, the side mirror and the magnet are the same

STEPS FOR USAGE:

(1) Basic operation

1. Insert the MicroTF card into the MicroTF card slot; press gently until the card is locked (note: the class 10 MicroTF card must be inserted to record and store pictures and videos)
   

2. Press and hold the on/off button (add the switch icon), the camera light will illuminate, and press the LED brightness adjustment button to adjust the brightness of the camera light

3. Short press take a photo ，long press record video，press again to stop recording

CHARGING:

1. When charging, connect the display to the handle, then insert the small end of the power adapter into the DC 5V-in port on the
   left side of the device panel and the other end of the power adapter into the standard AC outlet. The charging indicator on the
   device panel will be red, indicating that it is charging （When charging, the display must be connected to the handle, because the device’s rechargeable battery is built into the handle）
   The battery indicator LED will go out after the battery is fully charged Please unplug the power plug.
   

2. After fully charging, you can continue to use the device for up to 4 hours. When the battery is low, the message “Low Battery” will appear on the display. Then you must connect the power adapter and plug it into the outlet to charge the battery.(Please use the 5v 1A USB charger to charge your device Do not use a 12v charger.）

3. When charging in the power-on state, the device will automatically shut down, and you can re-use it after long press the power switch

TROUBLESHOOTING:

TECHNICAL PARAMETERS:

FCC INFORMATION:

This device complies with Part 15 of the FCC Rules Subject to the following two conditions：

1. This device does not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

QUESTIONS AND ANSWERS:

1. If needed, am I able to transfer images from the TF card?
A: You can use a card reader to connect to a computer to transfer or saving files.
2. Can you adjust the focus or it is strictly auto-focus?
A: Auto-focus, you can adjust the focal length, which is the distance between the camera and the object being observed.
3. Can it be used while being charged?
A: It is not recommended to use it while charging; it may damage the battery life.
4. Where can I get replacement accessories, like the cap and hook? Also what size are they?
A: Hello, we do not sell accessories; you can search for accessories on the platform. Product accessories can be used as long as they meet the diameter of 8.0mm.

5.What format are the recorded videos? Can they be transferred and played back on PC?
A: Hi, it is AVI format and can be transferred of played back on PC.
6. How does the camera cable connect to the display?
A: The monitor are integrated, you don‘t need to install them yourself.
7. Are the replacement batteries available, and at what price? Are they available only through the camera manufacturer or are they widely available?
A: Hello, our battery is rechargeable, we don’t provide a replacement.
8. Why does my camera get hot after a period of use?
A: Don‘t worry about that, it is a normal phenomenon that the camera become very hot, because our eight LED lights will continuously generate heat when they are used.

EU ENVIRONMENTAL PROTECTION:

Waste electrical products should not be disposed of with household waste.
Please consult your local government or retailer for recycling advice.
If the number contained in the user manual has any minor changes without prior notice.

EU ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please consult your local government or retailer for recycling advice.

*There are any minor changes to the numbers included in the user manual without prior notice

Own Your Comfortable Life

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>