PROAIM P-SBP-02 VCT Base Plate w Magnetic Shoulder Mount Instruction Manual
- October 27, 2023
- PROAIM
Table of Contents
P-SBP-02 VCT Base Plate w Magnetic Shoulder Mount
Instruction Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photo-
copying, recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
VCT Base Plate Setup
-
Loosen the knob of the base plate and insert the 200mm long rod into it.
-
Now insert the second 200mm long rod & tighten it properly with the knob as shown in the image.
-
Loosen the knob on the other side of the base plate and insert the 300mm long rod.
-
Insert the second 300mm long rod and tighten the knob properly, as shown in the image.
NOTE: There are 15mm(dia) rods on the front and back to accommodate more camera accessories. -
Open the shoulder pad, as shown in the image.
NOTE: It has a magnet mount system that allows easy access to the camera screws just by flipping the camera base plate. -
Now insert the camera bolt into the shoulder pad with the help of a screwdriver.
NOTE: The shoulder plate has 1/4″-20 and 3/8″16 threaded holes for storing additional screws.
Camera Setup
- Mount the camera (Not-Included) on the shoulder pad and tighten it properly with the help of a screwdriver.
NOTE: It has a 3.5″ long slot that allows quick positioning of your camera & accessories to evenly distribute the weight of your camera. NOTE: VCT base plate also supports RED (DSMC2), Arri (Amira and Alexa Mini), Sony (Venice, FS7, FS7M2, F5, F55, EX1, EX3), Canon (C200, C300, C300M2, C700), Panasonic (EVA1, Cinema Varicam LT 4k S35), Blackmagic (Ursa Mini), and many other camera models with in-terchangeable lenses.
YOUR PROAIM VCT BASE PLATE W MAGNETIC SHOULDER MOUNT ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty:
We offer one year warranty for our products from date of purchase. Within this
period of time, we will repair it without charge for labor or parts. Warranty
doesn’t cover transportation costs nor does it cover a product subjected to
misuse or accidental damage. Warranty repairs are subjected to inspection and
evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.