behringer VINTAGE TUBE MONSTER VT999 Classic Vacuum Tube Overdrive User Manual
- June 7, 2024
- Behringer
Table of Contents
behringer VINTAGE TUBE MONSTER VT999 Classic Vacuum Tube Overdrive User
Manual
Safety instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
Controls
The SERIAL NUMBER is located at the bottom.
- Use the 9 V connection to plug in a 9 V power supply.
- Use the POWER switch to activate/deactivate the unit.
- The POWER LED lights up when the unit is activated.
- The ¼” TS OUT connector sends the signal to your amp.
- Use this ¼” TS IN connector to plug in the instrument cable.
- The THRESHOLD control adjusts the input signal level at which the integrated noise gate starts noise reduction.
- The NOISE GATE switch activates/deactivates the integrated noise gate for noise reduction during quiet passages.
- The GAIN control adjusts the amount of distortion.
- The TREBLE control allows you to boost/cut the high frequency range.
- The MID control allows you to boost/cut the mid-frequency range.
- The BASS control allows you to boost/cut the low-frequency range.
- The MASTER control adjusts the output level.
- The Bugera 12AX7B vacuum tube is placed here.
- Use the footswitch to activate/deactivate the effect.
- The DRIVE LED illuminates when the effect is activated.
Sample Settings
-
High Gain Drive
-
Gain Boost
-
Hard Drive
-
Volume Drive
-
Crunch
-
Metal Drive
Warranty
Please register your new Behringer equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully
Specifications
In
Connector| 1/4″ TS
Impedance| 510 kΩ
Out
Connector| 1/4″ TS
Impedance| 1 kΩ
Power Supply
9 V , 300 mA adaptor (included)
Behringer PSU-SB|
USA/Canada| 120 V~, 60 Hz
Europe/U.K./Australia| 230 V~, 50 Hz
China/Korea 220| V~, 50/60 Hz
Japan| 100 V~, 50/60 Hz
| Power connector | 2 mm DC jack, negative center |
|---|---|
| Power consumption | 250 mA |
Dimensions
(H x W x D)| approx. 2.40 x 6.77 x 8.66″
approx. 61 x 172 x 220 mm
Weight| approx. 3.02 lbs / 1.37 kg
Behringer is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice.
Specifications and appearance may therefore differ from those listed or shown.
Thank you for showing your confidence in us by purchasing the Behringer VINTAGE TUBE MONSTER VT999. This high quality classic tube overdrive pedal is based on a hand-selected Bugera 12AX7B vacuum tube. Get a whole tube amp in a pedal and take off with anything from warm blues overdrive to heavy distortion.
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice.All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
