HYPERX B08NTYB4M7 Cloud II-wireless Gaming Headset User Guide
- June 7, 2024
- HYPERX
Table of Contents
HYPERX B08NTYB4M7 Cloud II-wireless Gaming Headset
Overview
A. Mic mute/mic monitoring button
B. USB charge port
C. Microphone port
D. Status LED
E. Power button / 7.1 Surround Sound button
F. Volume wheel
G. Detachable microphone
H. Microphone mute LED
I. USB adapter
J. Wireless pairing pin hole
K. Wireless status LED
L. USB charge cable
Usage
- Connect the wireless USB adapter to your device
- Power on the headset
Setting up with PC
Right click speaker icon > Select Open Sound settings > Select Sound control panel
Playback Device
- Set Default Device to “HyperX Cloud II Wireless”
- Right click on “HyperX Cloud II Wireless” and click on Configure.
Select 7.1 Surround to configure your setup and click next.
Recording Device
Set Default Device to “HyperX Cloud II Wireless”
Setting up with PlayStation 4
- Connect the wireless USB adapter to your device
- Power on the headset
Settings > Devices > Audio Devices
Input Device: USB Headset “HyperX Cloud II Wireless”
Output Device: USB Headset “HyperX Cloud II Wireless”
Output to headphones: All Audio
Status LED
| STATUS | LED |
|---|---|
| Pairing | Flash Green and Red every 0.2s |
| Searching | Slow breathing Green |
| Connected* | 90% — 100%: Solid Green |
15% — 90%: Blinking Green
< 15%: Blinking Red
*Battery level indication
Mic mute / mic monitoring button
- LED On – Mic muted
- LED Off – Mic active
- Hold for 3 seconds to toggle mic monitoring on/off
Power button / 7.1 Surround Sound
- Power on/off – Hold power button for 3 seconds
- Press to toggle 7.1 Surround Sound on/of
Volume wheel
Scroll up and down to adjust volume level.
WARNING: Permanent hearing damage can occur if a headset is used at high
volumes for extended periods of time.
Charging
It is recommended to fully charge your headset before first use.
STATUS LED
|
CHARGE STATUS
---|---
Solid Green| Fully Charged
Breathing Green| 15% — 99%
Breathing Red| < 15%
Wired Charging
HyperX NGENUITY Software
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at : hyperxgaming.com/support/headsets
ANATEL ID: 14135-20-07196
ANATEL ID: 14212-20-07196
HyperX is a division of Kingston.
THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE
©2021 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley,
CA 92708 USA.
All rights reserved. All registered trademarks and trademarks are the property
of their respective owners.
Kingston Technology Europe Co LLP, Kingston Court, Brooklands Close,
Sunbury–on–Thames, Middlesex, TW16 7EP, UK.
Kingston Technology International Ltd, Stratus House, College & Business
Technology Park, Blanchardstown Road North, Dublin, D15 PEC4, Ireland
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>