V-TAC VT-872 Surface Mounted GU10 Fitting Round Installation Guide
- June 7, 2024
- V TAC
Table of Contents
INSTALLATION INSTRUCTION
WEEE Number: 80133970
Surface Mounted
GU10 Fitting
2 YEARS WARRANTY
TECHNICAL DATA:
| Material: | VT-872 |
|---|---|
| Model No.: | Aluminium+PC |
| Color of Fixture: | Round |
| Shape: | White+Black, White+Rose Gold, White+Gold, White+Chrome |
| Cutting Size: | 72mm |
INSTALLATION DIAGRAM:
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the installing
and keep this manual handy for future reference. If you have any other
queries, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at your best.
The warranty is valid for 5 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours of Daily operation. Usage of product for 24 hours a day would
void the warranty.
This product is warranted for manufacturing defects only.
INSTALLATION INSTRUCTION
- Switch off the power.
- Ensure that the void depth is a minimum 90mm and the thickness of the ceiling is a maximum 20mm. (Pic 1)
- Cut a hole using an appropriate tool according to the cut-out size.
- When opening the package, take off the fixture and install the GU lamp.
- Connect the wire of the driver to the main power source (110V-220V), then place the driver into the ceiling properly.
- Push the spring clips upwards and fit them into the ceiling hole. Make sure that the product is sitting properly in the hole.
- Adjust the angle. Switch on the power if the above steps are done properly with no mistakes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>