Cobra DASH CAM SC 201 User Guide
- June 7, 2024
- Cobra
Table of Contents
Cobra DASH CAM SC 201 User Guide
Overview
Attach Adhesive Mount and remove the protective film from mount and camera
lens.
Attach Camera Assembly to Windshield
Connect and Power
Camera Automatically Begins Recording
Button Functions (Recording Stopped):
Access the dash cam’s Settings menu
Takes a snapshot and stores it in the Photo Folder
Enters the playback menu to review previous
recordings and photos.
Begins loop recording
When pressed the camera saves the current
clip from being overwritten.
Takes a snapshot and stores it in the Photo Folder
Toggles the microphone on/off. Note that the icon on the button indicates
the action that will be taken when the button is pushed, not the current
setting. The current setting is shown on the status bar at the top of the
screen.
Stops loop recording. While in an Emergency Recording you will be asked to
confirm.
Parts Included
-
16GB MicroSD Card
-
Adhesive Mount
-
Vehicle Charger
-
Micro USB Data Cable
View, edit and share from your smartphone or desktop. Share & receive real- time driver alerts. Download today! drivesmarter.com/downloads
Full manual available at: www.cobra.com
FCC ID:BBOSC201, IC:906A-SC201. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTEFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FCC NOTE: Modifications not expressly approved by the manufacturer could void the user’s FCC granted authority to operate the equipment.
Cobra® and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA. Other trademarks and trade names are those of their respective owners.
©2020 Cobra Electronics Corporation