arlo Essential Video Doorbell Wire-Free User Guide
- June 7, 2024
- Arlo
Table of Contents
Essential Video Doorbell Wire-Free
Quick Start
Hello! You’re just a few steps away from getting your doorbell up and running.
-
Charge the battery to 100%.
The battery LED lights red during charging then turns green when the battery is fully charged. -
Download the Arlo app from the App Store or Google Play.
-
Follow the step-by-step instructions in the Arlo app to install.
What’s in the box
Tools
- A Phillips screwdriver is required to install the doorbell (not provided).
- You might also benefit from having a drill, a level, and a ladder (to reach the chime).
If you choose to wire your doorbell
If you choose to wire your wire-free Essential Video Doorbell, the voltage
must be 8 – 24VAC and a 10VA transformer is required.
If your voltage doesn’t meet the power requirements, and you need to install
or upgrade a transformer, contact a licensed electrician or visit
arlo.com for information about installation services.
Need help?
We are here for you.
Visit www.arlo.com/support for quick answers
and resources:
- How-to videos
- Troubleshooting tips
- Additional support resources
© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are
trademarks of Arlo Technologies, Inc. App Store is a service mark of Apple
Inc. Google Play is a
trademark of Google LLC. Other trademarks are for reference purposes.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
For regulatory compliance information including the EU Declaration of
Conformity, visit
www.arlo.com/about/regulatory/.
Arlo Technologies Intl. Ltd.
Ground Floor, Building 3 University Technology Center Curraheen Road, Cork,
T12 EF21 Ireland
Arlo Technologies, Inc.
2200 Faraday Avenue, Suite 150
Carlsbad, CA 92008 USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>