behringer MONITOR1 Premium Passive Stereo Monitor and Volume Controller User Guide
- June 7, 2024
- Behringer
Table of Contents
behringer MONITOR1 Premium Passive Stereo Monitor and Volume Controller
User Guide
Important Safety Instructions
Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear
section). No user serviceable parts inside. Refer servicing to qualified
personnel.
Caution
To reduce the risk of fi re or electric shock, do not expose this appliance to
rain and moisture. The apparatus shall not be exposed to dripping or splashing
liquids and no objects filled with liquids, such as vases, shall be placed on
the apparatus.
Caution
These service instructions are for use by qualified service personnel only. To
reduce the risk of electric shock do not perform any servicing other than
that contained in the operation instructions. Repairs have to be performed by
qualified service personnel.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments/ accessories specified by the manufacture.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this app aratus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/ EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
- Do not install in a confined space, such as a book case or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
- Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
- Use this apparatus in tropical and/or moderate climates.
LEGAL DISCLAIMER
MUSIC Group accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE,
TANNOY, TURBOSOUND,TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and DDA are
trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP
Ltd.
2016 All rights reserved.
MONITOR1 Hook-up
Step 1: Hook-Up
Monitor1 between a mixer and pair of monitor speakers.
Monitor1 between an audio interface and pair of monitor speakers.
MONITOR1 Controls
Step 2: Controls
-
MONO button sums the left and right inputs, sending a mono signal to all outputs.
-
LEVEL knob adjusts the output level sent to the speakers. Set the output on your source audio fairly high to achieve the least noise possible.
-
MUTE button mutes all outputs.
-
INPUT section accepts balanced or unbalanced ¼ ” TRS or XLR cables, or a single 1⁄8″ stereo cable. Do not use the combo jacks and the 1⁄8″ jack simultaneously.
-
OUTPUT section sends audio to your listening device via XLR cables or a single 1⁄8″ stereo cable. Do not use the XLR outputs and 1⁄8″ output simultaneously
Specifications
Inputs
Connectors
|
2 x XLR-TRS combo jacks, 1 x 1⁄8″ TRS jack
Impedance
| 10 kΩ balanced / 5 kΩ unbalanced
Max. input level|
22 dBu
Outputs
Frequency response
|
10 Hz – 100 kHz ±1 dB
THD
| 0.01%
Max. attenuation|
85 dB (attenuator), 115 dB (mute)
System
Frequency response
|
10 Hz – 100 kHz ±1 dB
THD
| 0.01%
Max. attenuation|
85 dB (attenuator), 115 dB (mute)
Physical
Dimensions(H x W x D)
| 69 x 145 x 85 mm (2.7 x 5.7 x 3.3″)
Weight|
0.4 kg (0.88 lbs)
Other important information
- Register online. Please register your new MUSIC Group equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
- Malfunction. Should your MUSIC Group Authorized Reseller not be located in your vicinity, you may contact the MUSIC Group Authorized Fulfiller for your country listed under “Support” at behringer.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product.
- Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at music-group.com/warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>