ELECTROHOME RR75B Kingston 7-in-1 Vintage Vinyl Record Player Stereo System User Guide

TURNTABLE QUICK START GUIDE
RR75

PRODUCT INFORMATION

1. Transit Screw
2. 45 Adapter
3. Platter
4. Spindle
5. Cueing Lever| 6. Tonearm Lock
7. Speed Selector (33/45/78 RPM)
8. Tonearm
9. Stylus
---|---

IMPORTANT
Before playing, please remove the packaging foam on top of the Turntable. Then use a screwdriver to turn the Transit Screw in a clockwise direction until the screw is fully down to unlock the Turntable

FIRST TIME USE

1.  Plugin the unit and set to Phono function
2.  Ensure the Transit Screw is fully down for playback
3.  Place a record on the Platter. If playing a 7” record place the 45 Adapter on the Spindle in the center of the Platter
4.  Ensure the Speed Selector is set to the proper speed (33, 45, or 78)
5.  Remove the plastic stylus protector from the end of the Tonearm
6.  Unlock the Tonearm Lock and Raise the Tonearm using the Cueing Lever
7.  Position the Needle over the edge of the record
8.  Lower the Tonearm using the Cueing Lever
9.  The Turntable will stop spinning at end of the album

NOTE: Always lock Tonearm when the record player is not in use

POWER ON FOR FIRST TIME

1.  Plugin the unit and set the rear Power Switch to ON
2. Press the Standby Knob to turn on the unit

Questions? Give us a chance to help, we’re just a click away.

Electrohome.com/resources
Electrohome.com/videos
Electrohome.com/support
Electrohome.com/contact

References

• Electrohome Support Center
• Resources | Electrohome
• Electrohome Support Center
• Electrohome Support Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>