Electrohome EB30 McKinley Powered Bookshelf Speakers User Guide

Electrohome EB30 McKinley Powered Bookshelf Speakers

INTRODUCTION
Since 1907 Electrohome has been developing high fidelity audio products & has been welcomed into homes for generations. One thing that remains the same in our more than 100 year history is our unmatched dedication to design and premium craftsmanship. Thank you for your purchase of this Electrohome® product. We hope you enjoy your experience.

BREAK-IN PERIOD
Our speakers have a butyl rubber ring surrounding the cone. The break-in period allows the rubber to loosen and stretch, allowing the cone a larger range of movement, which gives a better sound reproduction. We recommend 10-12 hours of play at moderate volume to achieve this.

WHAT’S INCLUDED

PRODUCT INFORMATION

Remote Control

1. Power On/Off

2. Volume Up/Down

3. Bass Up

4. Bass Down

5. Mute

6. Tap: Play/Pause
   Hold: Bluetooth Reset

7. Previous/Next Track

8. Source

9. Treble Up

10. Treble Down

11. Reset EQ Front & Back Panel

12. Tweeter

13. Woofer

14. Control Knob

15. LED Indicator

16. IR Sensor

17. RCA Input

18. AUX Input

19. Bluetooth Pairing Reset

20. Power Input

21. Speaker Wire Output

22. Speaker Wire Input

LED Indicator

FIRST TIME SETUP

1. Position the speakers with the Active Speaker on the right and the Passive Speaker on the left.
   NOTE : If placing the speakers in a cabinet or on a shelf, position the front of the speakers as close as possible to the front edge of the shelf for optimum audio performance.

2. Connect the speaker wire to the spring clips on the back of the Active Speaker and connect the other end of speaker wire to the spring clips on the back of the Passive Speaker.
   IMPORTANT : Ensure each wire is connected to the same color binding post on each speaker. Positive (+) to positive (+) and negative (-) to negative (-).
   NOTE : The included speaker wire is 8ft. If placing your speakers further than 8ft apart it is recommended to use standard 22 gauge speaker wire to connect the speakers over the longer distance.

3. Connect the power cable to the back of the Active Speaker and connect the other end to a power outlet.

TURNING ON/OFF UNIT

Press the Control Knob to turn on the unit. Hold to turn off the unit. Press on the Remote to turn the unit on/off.

RCA INPUT

1. Connect the RCA end of the RCA to Aux cable to your source device (Turntable, Smartphone, Computer…).
2. Connect the Aux end of the RCA to Aux cable to back of the Active Speaker.
3. Press the Control Knob to select the RCA input (Green LED).
4. Adjust volume on EB30 as well as source device. IMPORTANT : When connecting a turntable, a phono preamplifier must be used. Preamps are often built into turntables but can also be standalone devices. If your turntable has extremely low volume a preamp may be needed.

BLUETOOTH® PAIRING

1. Press the Control Knob to select the Bluetooth input (Blue LED).

2. Pair to “Electrohome EB30” on your source device. Note : Unit will attempt to auto-pair to the last paired device.

3. Use the Remote to control playback on your source device
   Note : Adjust Volume on the source device as well as the EB30.

4. If your device cannot find “Electrohome EB30”, you can reset Bluetooth® pairing:

   • Press and hold for 3 seconds to reset Bluetooth® pairing.
   • Press and hold the Bluetooth® Pairing Reset Button on the back of the unit.
   • Note : How you access your device’s Bluetooth® settings may vary from one manufacturer to another. Maximum line of sight for Power Class 2 Bluetooth® range is 33ft. Obstacles may decrease transmission distance.

AUX INPUT

1. Connect the AUX cable to your source device (Smartphone, Computer…).
2. Connect the other end of the AUX cable to back of the Active Speaker.
3. Press the Control Knob to select the AUX input (Yellow LED).
4. Adjust volume on EB30 as well as source device.

FREQUENTLY ASKED QUESTIONS

What is “auto-pairing” and how does it work?
Auto-pairing is a convenient connection feature. If the connected Bluetooth®-enabled device leaves the connection range of the EB30 and returns at a later time, the device will automatically connect. If the device’s Bluetooth® function is disabled and then enabled at a later time, the device will automatically connect as well.
Note : The Electrohome EB30 will only auto-pair to the last device that it was connected to.

How do I change the source on my Electrohome EB30?
Press the Control Knob or use the Source button on the Remote Control. The LED will change to the Source LED color (Blue/Green/Yellow).

How do I adjust the Volume on my Electrohome EB30?
Turn the Control Knob or use Volume buttons on Remote Control. The LED will flash the Source LED color at Max.

How do I adjust the Bass and Treble on my Electrohome EB30?
Use the Bass and Treble buttons on the Remote Control. The LED will flash as listed below at the minimum, maximum, and middle settings.

SPECIFICATIONS

Passive: 5.60 lbs (2.54 kg)

Dimensions (H x W x D)| 10.0 x 6.5 x 7.6 inches (25.4 x 16.5 x 19.4 cm)

IMPORTANT SAFETY INSTRUCTIONS

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into you outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.
16. Do not overload wall outlet. Use only power source as indicated.
17. Use replacement parts as specified by the manufacturer.
18. The product may be mounted to a wall only if recommended by the manufacturer.
19. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.
20. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
21. No naked flame sources, such as lighted candles, should be placed on the apparatus.
22. Attention should be drawn to environmental aspects of battery disposal.
23. Use of the apparatus in moderate climates.
24. WARNING : The appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
25. CAUTION : These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
26. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

References

• Electrohome Support Center
• Register Your product | Electrohome
• Resources | Electrohome
• Electrohome Support Center
• Electrohome Support Center
• Electrohome Support Center
• Electrohome Support Center
• Electrohome Support Center
• Resources | Electrohome
• Electrohome Support Center

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>