ANKER A3951 Soundcore Liberty Air 2 Pro Wireless Earbuds User Manual
- June 7, 2024
- Anker
Table of Contents
SUPPORT
For FAQs, detailed user manual and more information, please visit www.soundcore.com/support
-
APP
Download the
Soundcore App to customize the user interface (e.g. adjust volume, control
playback, activate voice assistant), trace HearID, adjustEQ, switch ANC modes,
update firmware, and explore more. -
FIRMWARE UPGRADE
Ensure the earbuds
are placed in the charging case and the case remains open until the firmware
upgrade is completed. -
AMBIENT SOUND
Switch
ANC/Transparency/Normal modes in the Soundcore App.
ANC (Active Noise Cancellation): Reduce unwanted background noise.
Transparency: Stay aware of surroundings while listening to music.
-
WEARING
Choose the Liquid Silicone
EarTips that fit your ears best. -
CHARGING
Fully dry
off the earbuds and the USB-C charging port before charging.
Use a certified USB-C charging cable to prevent any damage. For wireless charging, position the charging case at the center of your wireless charger. -
POWERING ON/OFF
Open the charging case,
the earbuds will automatically power on. To power off, place the earbuds in
the charging case and close it. -
PAIRING
Open the charging
case, the earbuds will automatically enter the Bluetooth pairing mode. Select
“Soundcore Liberty Air 2 Pro” on your device’s Bluetooth list to connect. -
CONTROLS
x2: Tap twice 2s: Press
and hold for 2 seconds Auto-pause music playback when removing the earbuds,
wear them again to resume. -
RE-PAIRING
Pairing with another
device: Place the earbuds in the charging case and leave the case open. Press
and hold the button on the case for 3 seconds until the earbud LED indicators
flash white to enter pairing mode. -
RESET
-
Reset if the earbuds cannot properly pair with each other or with other devices.
Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 10 seconds until the earbud LED indicators flash red 3 times and then turn white. Wait until the LED indicator on one of the earbuds flashes fast while the other flashes slowly. This confirms that the reset was successful and your earbuds can be connected normally. -
LED LIGHT GUIDE
Steady white
Flashing white
Flashing red -
Customer Service
24-month limited warranty
Lifetime technical support -
service@soundcore.com
+1 (800) 988 7973 (US) Mon – Fri 9:00am – 17:00pm (PT)
+44 (0) 1604 936200 (UK) Mon – Fri 6:00 – 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mon – Fri 6:00 – 11:00
Input: 5V 0.5A
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA,
United Kingdom
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3-5, 80807 Munich, Germany