QAZQA 103091 Nidum HL Black 60 Ceiling Light Instruction Manual
- June 3, 2024
- QAZQA
Table of Contents
Nidum HL Black 60 Ceiling Light
Instruction Manual
103091 Nidum HL Black 60 Ceiling Light
|
---|---
MANDATORY SAFETY INSTRUCTION
Due to fabrication system of these mesh lamps, there may be some sharpness at
some parts, kindly take precaution while assembling the lamp.
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference:
-
The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
-
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
-
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
-
Exterior lighting must not be installed during rain.
-
Take account of the minimal separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
-
When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
-
Take account of all available technical information.
-
Take note of the symbols when connecting wires:
N =Neutral
L = Live
=Earth -
Meaning of symbols:
| For indoor use only, where
direct contact with water is impossible
---|---
IPXX| This icon indicates the level of water-proof and dust-proof
| Protection Class I: the fitting
must be earthed
| Protection Class II: the
fitting is doubled insulated and does not require earthing
| Protection Class Ill: the
fitting is low voltage
| Minimum distance from lighted
objects (meters)
| Only the self-shielded halogen
lamp should be used with the luminaire
| Strip the wire to the
indicated length (mm);different items require different length
| Connect using the specified
cable; different items require different cables
| The type of lamp and
maximum size and wattage indicated in each lighting unit must not be exceed;
different items require different kind of light sources with different
| The armature is designed to
work only with the indicated voltage. Different items require different
working voltage.
| The luminaire can be used
in combination with a dimmer
| The reference light angle
and light space of the luminaire
| This luminaire cannot be
disposed together with normal domestic waste in standard rubbish can, but you
have to bring it to a staging area for electrical waste
FittinQ B.V.
Smaragdweg 52,5527 LB Hapert,
The Netherlands www.qazqa.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>