KINO MIMIK 120 LED Fixture User Guide
- June 7, 2024
- KINO
Table of Contents
KINO MIMIK 120 LED Fixture
Product Information
Specifications
The MIMIK 120 LED Fixture is a high-performance lighting solution suitable
for various applications.
- Model: MIM-120 MIMIK 120
- Pixel Resolution:
- Junior (4096×2160) = 8,847,360 pixels
- 4K (4096×2160) = 8,847,360 pixels
- 8K (8192×4320) = 35,389,440 pixels
Product Usage Instructions
Power Connection
The MIMIK 120 LED Fixture is powered through an AC Power Input using
Powercon TRUE1 connectors. Ensure to connect the fixture to a compatible power
source as per the provided specifications.
Recommended Accessories:
- IPPOWERKONEXT10FT Powercon True1, 10ft, 120VAC
- PWC-PC10/230 Powercon True1, 10ft, 230VAC
- PWC-PCJ3 Powercon True1 Jumper 3ft
Data Connection
The MIMIK 120 supports Ethernet data transmission through RJ45 or Ethercon
connectors. Use the provided Ethernet Data Jumpers based on your connectivity
requirements.
Recommended Accessories:
- DAT-E3 Ethernet Data Jumper, 3ft
- DAT-E25E Ethernet Data Jumper, 25ft
Control via HELIOS Software
The MIMIK 120 can be controlled using the Megapixel HELIOS video processor
software accessible via a web browser. Multiple users can access the system
simultaneously for convenient operation.
FAQ
-
Q: How many MIMIKs can be connected in a daisy chain?
A: For HELIOS Jr, each 1G output can drive up to 30 MIMIKs in a daisy chain. For HELIOS Standard with 10G Fiber SFPs, external Netgear switches can drive up to 2400 MIMIKs. -
Q: What should I do with old electrical equipment?
A: Disposal of old electrical and electronic equipment should be done following governmental regulations. Do not treat the product as household waste; it contains recyclable materials.
MIMIK 120 LED Fixture
The MIMIK 120 LED is a Video Lighting Tile that mirrors video content while
doubling as a light source. It is driven by the Megapixel Helios processor
(required). It uses a patented full spectrum solution to maintain the
colorimetry of the incoming RGB video signal. The three color RGB video signal
is translated to full spectrum five color Warm White 2700K, Cool White 6500K,
Red, Green and Blue LEDs.
Since the MIMIK video tile uses the same video signal, it can be synchronized
with other video displays. It does not have the synchronization and latency
issues common with DMX mapped lighting systems.
The user can easily display any portion of the video signal on the MIMIK tile
using the Helios platform. This eliminates the need for additional “delay
creating” mapping software. The MIMIK tile operates at a high refresh rate of
30kHz and 16-bit depth enabling camera speeds of up to 900 fps with no
flickering at low light levels.
A lighting desk can be used to control light levels and select the video image
used on the MIMIK through the Helios processor.
The MIMIK can be configured to work in parallel with other video displays /
processors.
MIM-120
MIMIK 120 LED
7010066
MIMIK 120 Yoke Assembly
7010066
MIMIK 120 Yoke Assembly
MIMIK AC Power
AC Power
Input and pass through Powercon TRUE1 Maximum is 4 MIMIKs in one string on a
120V 15A circuit.
IPPOWERKONEXT10FT
Powercon True1, 10ft, 120VAC
PWC-PC10/230
Powercon True1, 10ft, 230VAC
PWC-PCJ3
Powercon True1 Jumper 3ft
MIMIK Data
Ethernet IN / OUT
RJ45 or Ethercon connectors
Either port can be the input or the output.
DAT-E3
Ethernet Data Jumper, 3ft
DAT-E25E
Ethernet Data Jumper, 25ft
Operating Temperature / Humidity
The MIMIK is designed to operate at temperatures and humidity from:
-10°~45°C, 10~90%RH / 14°~113°F, 10~90%RH
Fixture Specifications
MIM-120 MIMIK 120
-
Pixel Pitch: 10mm
-
Pixel Count: 7,200 pixels (120 x 60)
-
Pixel Construction: 5 LEDs per pixel – Warm White 2700K, Cool White 6500K, Red, Green, Blue
-
LED Package: SMD 5050 – Black Body
-
Viewing Angle Horizontal / Vertical: 140° / 140°
-
LDM (LED Display Module): 8 Total – Magnetically attached – Front side Serviceable
-
LDM Transparency: Solid – Black front
-
Scan Ratio: 1/3
-
Refresh Rate: 30kHz (30,720Hz)
-
Gray Scale: 16-bit minimum (65,535 steps)
-
Frames Per Second: 900 fps
-
Max Alpha Channels: 30 at 30 fps
-
Max Brightness Calibrated: ~10,000 nits
-
Input Voltage VAC: 100~240VAC; 50/60Hz
-
Power Consumption Max / Average: 400W / 200W (Varies based on video content)
-
Receiver Card: 2 x PX1 (Megapixel)
-
Video Processor Required: Megapixel Helios
Junior (4096×2160) = 8,847,360 pixels = ~240 MIMIK 120
4K (4096×2160) = 8,847,360 pixels = ~1,200 MIMIK 120
8K (8192×4320) = 35,389,440 pixels = ~2,000 MIMIK 120 -
Control Software: No software or drivers to install. Controlled through Megapixel Helios.
-
Frame Material: Carbon Fiber
-
Maximum Stacking: 5 Tiles high, no limit to width
-
Tile Linking: Corner blocks, 2-way and 4-way locking
-
Curving (Concave & Convex): Concave (With attachment)
-
Certifications: CE, UKCA, ETL, FCC
-
Patents: US 11,393,372 B2
-
IP Rating: IP20 – Indoor
-
Operational Temp / Humidity: -10°~45°C, 10~90%RH / 14°~113°F, 10~90%RH
-
Dimensions: 120cm x 60cm x 8cm, 47.2” x 23.6” x 3.2”
-
Weight: 12.5kg / 27.6 lbs
Megapixel Helios
HELIOS Software
The Megapixel HELIOS video processor is controlled via a web browser. There is
no software to install. Open your favorite web browser and enter the IP
address shown on the front screen of the HELIOS. Multiple users can be logged
in at the same time.
For more information visit www.megapixelvr.com.
Megapixel Helios Overview
Management Port IP Address shown on front screen
Video Preview
Push Button / Encoder
Power Switch, Fuse and IEC Input: 100 – 240VAC, Internal Redundant Ethernet
Management Port (Connect to Computer)
8k Input pixel map
Display Port (Optional x2)
HDMI (Optional x2)
SDI Module – Not Included – 4 Shown (Optional up to 4)
SMPTE 2110 Fiber SFP (Optional up to 4)
Ethernet outputs:
HELIOS Jr: 1G x8. Each 1G output can drive 30 MIMIKs in daisy chain. HELIOS
Standard: 10G Fiber SFPs (optional for larger pixel counts) requires license
upgrade and external Netgear switches can drive up to 2400 MIMIKs.
Sync / Genlock
The output of the HELIOS is its own IT network. The traffic is not routable
over a standard IP network. It can only be routed with Megapixel’s Netgear
switches which are only necessary for large pixel / tile counts.
The HELIOS Jr does not support external Switches. You can connect 30 MIMIKs to
each of the 8 one Gigabit copper ethernet outputs, for a total of 240 MIMIKs
on one HELIOS Jr.
The HELIOS Standard supports external Switches and is a paid license upgrade
from HELIOS Jr. In Standard mode the HELIOS supports up to 2400 MIMIKs.
The HELIOS Jr and HELIOS Standard use the same Hardware. The license
determines operating mode.
MEG-SDI Megapixel (BNC) Input SFP
A Megapixel SDI (BNC) SFP if required is sold separately.
FCC Part 15 Verification:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference.
FCC Part 15 Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. The luminaire is intended for professional use only.
For full operation manual, latest Warranty information and Certifications, see
Kino Flo website at www.kinoflo.com.
Environmental: Disposal of Old Electrical & Electronic Equipment.
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. This product is made of recyclable
materials and should be disposed of in accordance with governmental
regulations.
Kino Flo, Inc. 2840 N. Hollywood Way, Burbank, CA 91505, USA Tel: 818 767-6528
website: www.kinoflo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>