BOSE BASS 500 Wireless Subwoofer User Guide
- June 6, 2024
- Bose
Table of Contents
BASS MODULE 500
CHOOSE YOUR SETUP METHOD
Your setup method depends on which soundbar or speaker you have.
- Bose Soundbar 500, Bose Soundbar 700, or Bose Smart Soundbar 300: See page 4.
- Bose TV Speaker (or alternate wired setup for soundbars): See page 5.
- SoundTouch 300 soundbar: See page 6.
BOSE SOUNDBAR 500, BOSE SOUNDBAR 700, BOSE SMART SOUNDBAR 300
Keep at least 1 – 3 ft. (0.3 – 0.9 m) away from other wireless equipment.
| Place the bass module
---|---
| Set up
using the Bose Music app
A. In the Bose Music app, from the My Bose screen, tap your soundbar.
B. Tap the soundbar image in the bottom-right corner of the screen.
C. Tap Settings > Accessory Speakers > Add Bose Accessory Speakers.
New to the Bose Music app?
Download the app and follow the app instructions to set up your soundbar and
bass module.
BOSE TV SPEAKER (OR ALTERNATE WIRED SETUP FOR SOUNDBARS)
Keep at least 1 – 3 ft. (0.3 – 0.9 m) away from other wireless equipment.
| Place the bass module
---|---
Once connected, the bass module powers on.
| Connect the bass module to power
| Connect the bass module to the speaker
Connect a 3.5 mm audio cable (not provided) to the bass module’s x connector and the speaker’s h connector (not the B connector).
NOTE: If you don’t have a 3.5 mm audio cable, visit
worldwide.Bose.com/Support/BASS500
to purchase a 15 ft. (4.5 m) cable or go to your
local electronics store.
SOUNDTOUCH 300 SOUNDBAR
Keep at least 1 – 3 ft. (0.3 – 0.9 m) away from other wireless equipment.
| Place the bass module
---|---
Once connected, the bass module powers on.
| Connect the bass module to power
A. On your SoundTouch 300 remote control, press .
B. Press and hold G until the soundbar blinks white.
Once the bass module connects, you hear a tone and
glows white.
NOTE: Connecting may take several minutes.
| Connect the bass module to the soundbar
A. Connect the ADAPTiQ headset (included with the
soundbar) to the soundbar’s connector.
B. Put the headset on your head.
| Set up ADAPTiQ audio calibration
A. On your SoundTouch 300 remote control, press .
B. Press and hold 8 until and the soundbar glows green.
NOTE: To cycle through languages, press , and on the navigation pad.
| Run ADAPTiQ audio calibration
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>