SHURE SBH2350 AONIC 50 Wireless Headphones User Manual
- June 6, 2024
- Shure
Table of Contents
AONIC 50
Wireless Headphones
The Shure AONIC 50 Wireless Noise-cancelling Headphones user guide (Model: SBH2350). Version: 1 (2020-F)
Bluetooth® Pairing
Headphones automatically enter pairing mode when you power them on the first
time or when they have not been previously paired with this audio source.
1. From your audio source, select “Shure 50.”
2. When successfully paired, you hear “Connected”.
Headphones automatically pair with previously paired devices when you power
them on. After a few seconds, you will hear “Connected”.
Manual pairing
- Turn off the headphones.
- Press and hold the power button for 6 seconds.
- When you hear “Bluetooth pairing mode,” release the button.
- From your audio source, select “Shure 50.”
- When successfully paired, you hear “Connected”.
Note: If the pairing fails on the first attempt, repeat the process from
the beginning.
To customize the listening features with your device, download the free
ShurePlus™ PLAY app for iOS and Android.
Using the Buttons
Power button
Power on | Press and hold, 2 seconds |
---|---|
Power off | Press and hold, 2 seconds |
Pair Bluetooth | 1. Turn off the headphones |
2. Press and hold, 6 seconds
Check battery status| Double press (audible status notification)
Center button
Play/Pause | Press once |
---|---|
Next track | Double press |
Previous track | Triple press |
Answer/End a call | Press once |
Decline a call | Press and hold, 2 seconds |
Activate voice assistant | Press and hold, 2 seconds |
Factory Reset | 1. Turn off the headphones and plug them into a charger |
2. Press and hold, 7 seconds
Side buttons
Volume up | Press + |
---|---|
Volume down | Press – |
Environment mode/ANC switch
Environment mode | Push switch up |
---|---|
Active Noise Cancellation | Push switch down |
Hardware reset
If the buttons do not respond to repeated presses, you can perform a hardware
reset to force a power off.
- Press the +, -, and power buttons simultaneously to immediately power off the headphones. This does not reset any values you may have changed.
- Power on the headphones.
LED indicator
Bluetooth pairing | Alternating red and blue |
---|---|
Bluetooth connected | Blue for 2 seconds, then off |
Bluetooth connection lost | Slow blinking blue |
Low battery | Slow blinking red |
Charging | Red |
ShurePlus PLAY Mobile Listening App
General Description
The ShurePlus PLAY Mobile Listening App is a high-resolution music player with
advanced EQ controls. Play uncompressed audio files with your iOS or Android
mobile device using the music tab. Use built-in Shure EQ presets to customize
the sound, or create your own EQ presets in the settings tab. Unlock
environment mode and ANC features by connecting to Shure wire less and True
Wireless products in the device tab.
Features
- Import and play multiple, high-resolution and standard file types
- Customize presets with the parametric graphic EQ
- Adjust your volume with the full-screen fader
- Create playlists and organize your music library by playlist, artist, album title, song title, genre, or composer
- Quickly dial in your sound with EQ preset modes for a variety of listening situations.
Environment mode
Environment mode allows you to accentuate the ambient noise around you. This
is especially useful when you want to listen to music or are on a phone call,
yet you still want to be aware of the sounds around you.
To use environment mode, push the vertical switch on the back of the right
earcup to the up position.
In the ShurePlus PLAY app, you can adjust the environment mode across ten
levels:
Active noise cancellation
Active Noise Cancellation (ANC) allows you to suppress some or all of the
noise around you. This is especially useful when traveling where road noise in
a car, bus, or train, or jet noise in an airplane can force you to increase
the volume.
To use ANC, push the vertical switch on the back of the right earcup to the
down position.
In the ShurePlus PLAY app, you can adjust the ANC between two levels:
- Max
- Normal
Create Custom Presets
Add newly preset
-
Tap Settings > EQ to access the equalizer.
-
Scroll down to tap Add New Preset
-
Adjust your frequency, gain, and bandwidth parameters. There are three ways to adjust your equalizer. Tap the values
to type in a specific number. Tap the – or + to adjust in larger increments. Or, tap and drag the numbered circles for big ger changes. -
Tap the checkmark to save your new customized preset.
Duplicate a Preset
- Select one of the five preset modes and tap Duplicate.
- Tap the More Options 3 dots. Tap Edit EQ Preset.
- There are three ways to adjust your equalizer. Tap the values to type in a specific number. Tap the – or + to adjust in larger increments. Or, tap and drag the numbered circles for bigger changes.
- Tap the checkmark to save your new customized preset.
Use Screen Orientation to Adjust EQ
Hold your device in portrait mode to enter numerical EQ parameters. Rotate to
landscape mode for a close-up view of the curve.
Use portrait mode to easily select and adjust frequency, gain, and bandwidth.
Use landscape for a close-up view of your EQ curves.
Preset Modes
Use presets to quickly access commonly used listening scenarios. Five
selectable 4-band presets optimize settings for gain, equalization, and
compression. Play a song and find the preset that you think suits the song
best. Then adjust levels as need ed.
Preset | Application |
---|---|
De-ess | Use to reduce sibilance in speech. |
Flat | Listen to your unprocessed tracks. The equalizer is bypassed for an |
unchanged fre
Loudness| Accentuate the bass and treble frequencies to make the overall sound
feel louder.
Low Boost| Raise or lower the bass frequencies.
Vocal Boost| Emphasize the vocal range.
Firmware
Firmware is embedded software in each component that controls functionality.
Periodically new versions of firmware are devel oped to incorporate
additional features and enhancements. To take advantage of design
improvements, download new ver sions of the firmware when prompted.
When a new update is available, a green dot notification will appear. Update
when prompted or click Later to install firmware from the settings menu at a
later time.
Updating the Firmware
-
The earphones and the device should be powered on and near each other.
-
Pair the earphones with your device using Bluetooth.
Note: You will be asked to allow pairing the first time you connect PLAY to a Bluetooth device. -
Connect to the ShurePlus PLAY app. Your earphones will automatically pair with the PLAY app when the Device tab is selected.
-
Ensure that both earphone modules are paired with the device. If both earphone modules do not automatically connect, tap the music tab and back into the device tab to connect.
-
Follow the step-by-step instructions in the app.
-
The progress bar will display update percentage progress. A notification will appear when the download is complete.
-
If the update fails on the first attempt, check the list below for power and proximity requirements and repeat the process.
Tip: Follow these guidelines for the most reliable update.
- Using the headphones or device while downloading may slow the download process.
- The update requires a minimum charge of 50% on earphones and 50% on devices.
- The approximate download time for headphones and earphones is up to 60 minutes.
Cable connections
The headphones can also use two different cables to access audio instead of using the wireless feature:
-
USB-C:
◦Charge the headphones
◦Connect to digital audio -
3.5 mm audio cable: Connect to an analog audio port
Care and Maintenance
To clean the headphones, use a soft, damp cloth.
CAUTION: Do not use cleaners that contain solvents. Keep liquid and foreign
objects out of the driver openings.
Storage
Store headphones in a protective case when not in use.
Accessories
Furnished Accessories
REPL SBH2350 CASE ONLY | RPH-SBH2350-CASE |
---|---|
REPL USB-C to USB-A CABLE 1M | RPH-CABLE-USB |
REPL 2.5-3.5MM CABLE 1.5M | RPH-CABLE-AUDIO |
--- | --- |
Replacement Parts
SBH2350 REPLACEMENT EARPADS (BLACK) | SBH2350-BK-PADS |
---|---|
SBH2350 REPLACEMENT EARPADS (DARK BROWN) | SBH2350-BR-PADS |
Specifications
Model/Model: | SBH2350 |
---|---|
Transducer Type | Dynamic, Neodymium magnet |
Driver Size | 50 mm |
Frequency Response | 20 to 22,000 Hz |
Sensitivity | @ 1 kHz |
97.5 dB/mW
Impedance| @ 1 kHz
39 Ω
Maximum Input Power| 100 mW
Weight| 334 g (11.8oz.)
Operating Temperature| -10°C to 45°C (14°F to 113°F)
Antenna Type| Internal Monopole
Gain| +2.05 dBi
Operating Frequency| 2402 MHz-2480 MHz
Modulation Type| FHSS
RF Output Power| +4 dBm ( EIRP)
Supported Codecs| aptX, aptX HD, aptX Low Latency, SBC, AAC, LDAC
|
SAFETY PRECAUTIONS
Before using this product, please read and save the enclosed warnings and
safety instructions.
WARNING FOR ALL EARPHONES!
Use, clean, and maintain earphones according to the manufacturer’s
instructions.
SAFETY PRECAUTIONS
The possible results of incorrect use are marked by one of the two
symbols—”WARNING” and “CAUTION”—depending on the imminence of the danger and
the severity of the damage.
| WARNING: Ignoring these warnings may cause severe injury or death as a
result of incorrect op eration.
---|---
| CAUTION: Ignoring these cautions may cause moderate injury or property
damage as a result of incorrect operation.
WARNING
- If water or other foreign objects enter the inside of the device, fire or electric shock may result.
- Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
- Do not use when a failure to hear your surroundings could be dangerous, such as while driving, or when biking, walking or jogging where traffic is present and accidents could occur.
- Keep this product and its accessories out of reach of children. Handling or use by children may pose a risk of death or se rious injury. Contains small parts and cords that may pose a risk of choking or strangulation.
- Stop using the earphones and consult a medical professional if you experience irritation, excessive wax buildup, or another discomfort.
CAUTION
- Never disassemble or modify the device, as failures may result.
- Do not be subject to extreme force and do not pull on the cable or failures may result.
- Keep the earphone dry and avoid exposure to extreme temperatures and humidity.
- If you are currently receiving ear treatment, consult your physician before using this device.
High sound pressure
Hearing damage risk
To prevent possible hearing damage, do not listen to high volume levels for
long periods.
IMPORTANT SAFETY INSTRUCTIONS
- READ these instructions.
- KEEP these instructions.
- Heed all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with a dry cloth.
- DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli fiers) that produce heat.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
For Products That Use Bluetooth
WARNING
-
Follow instructions from the manufacturer.
-
Product battery may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140°F (60°C), or incinerate.
-
Attention should be drawn to the environmental aspects of battery disposal.
The product shall not be exposed to excessive heat such as sunshine, fire, or the like. -
Do NOT make unauthorized alterations to this product.
CAUTION
- Follow applicable laws regarding mobile phone and headphone use while driving.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical de vice.
- Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like
- Batteries (battery pack or batteries installed) shall not be crushed or cut
- Batteries (battery pack or batteries installed) shall not be subjected to extremely low air pressure
- Risk of fire or explosion if the battery is replaced by an incorrect type
CAUTION
- Never disassemble or modify the device, as failures may result.
- Do not be subject to extreme force and do not pull on the cable or failures may result.
- Keep the product dry and avoid exposure to extreme temperatures and humidity.
WARNING
- If water or other foreign objects enter the inside of the device, fire or electric shock may result.
- Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
Note: Battery replacement to be performed only by Shure authorized
service personnel.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: Testing is based on the use of supplied and recommended cable
types. The use of other than shielded (screened) cable types may degrade EMC
per performance.
Certifications
Visit http://www.shure.com/earphones for the latest regulatory and
compliance information.
Note: Testing is based on the use of supplied and recommended cable
types. The use of other than shielded (screened) cable types may degrade EMC
per performance.
This product meets the Essential Requirements of all relevant European
directives and is eligible for CE marking.
Hereby, Shure Incorporated declares that the radio equipment is in compliance
with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address:
http://www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: EMEAsupport@shure.de
LIMITED WARRANTY
Shure Incorporated (“Shure”) hereby warrants to the original consumer
purchaser only that, except as otherwise specified be low, this product will
be free in normal use of any defects in materials and workmanship for a period
of two (2) years from the consumer’s original date of purchase directly from
Shure or from a Shureauthorized reseller.
Any rechargeable batteries contained in or packaged with this product are so
warranted for a period of one (1) year from the consumer’s original date of
purchase. However, rechargeable batteries are consumable and their capacity
will be reduced over time based on temperature, amount of time in storage,
charging cycles, and other factors; hence reduction in battery capacity does
not constitute a defect in material or workmanship.
At its sole option, Shure will repair or replace the defective product and
promptly return it to you. In order for this warranty to be valid, the
consumer must, at the time the product is returned, provide proof of purchase
in the form of the original purchase re receipt directly from Shure or from a
Shureauthorized reseller. If Shure elects to replace the defective product,
then Shure re serves the right to replace the defective product with another
product of the same model or a model of at least comparable quality and
features in Shure’s sole determination.
If you believe this product is defective within the warranty period, carefully
repack the unit, insure it, and return it with proof of purchase, postage
prepaid, to Shure Incorporated, Attention: Service Department, at the address
below.
Outside of the United States, return the product to your dealer or Authorized
Service Center. Addresses are listed on www.Shure.com
or can be obtained by contacting Shure at the address listed below.
This warranty is not transferable. This warranty does not apply in cases of
abuse or misuse of the product, use contrary to Shure’s instruction, ordinary
wear, and tear, an act of God, negligent use, purchase from a party other than
Shure or a Shure authorized reseller, unauthorized repair, or modification of
the product.
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY DIS CLAIMED TO THE EXTENT PERMITTED UNDER APPLICABLE LAWS AND, TO
THE EXTENT NOT PERMITTED, ARE HEREBY LIMITED TO THE DURATION AND TERMS OF THIS
WARRANTY. SHURE ALSO HEREBY DISCLAIMS ALL LIABILITY FOR INCIDENTAL, SPECIAL,
OR CONSEQUENTIAL DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or
the exclusion or limitation of incidental or conse quential damages, so the
above limitation may not apply to you. This warranty gives you specific legal
rights, and you may have other rights which vary from state to state.
This warranty does not restrict the rights of the consumer mandated under
applicable laws.
THIS WARRANTY SUPERSEDES ALL OTHER WARRANTIES THAT ARE ASSOCIATED OR INCLUDED
WITH THIS PROD UCT, EXCEPT THAT ANY SOFTWARE CONTAINED IN OR PACKAGED WITH
THIS PRODUCT IS EXCLUDED FROM THIS WARRANTY AND INSTEAD SHALL BE COVERED BY
THE WARRANTY, IF ANY, PROVIDED IN SHURE’S END-USER LI
CENSE AGREEMENT ACCOMPANYING SUCH SOFTWARE.
References
- Shure: Microphones, Wireless microphones, in-ear monitoring, earphones, headphones
- Earphone Resource Center User Guide - Shure
- Documentation Finder - Shure Europe
- Documentation Finder - Shure Europe
- Service
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>