LUCIDE 79185 Unar Flush Ceiling Light Installation Guide
- June 3, 2024
- LUCIDE
Table of Contents
LUCIDE 79185 Ulnar Flush Ceiling Light
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting. Welcome to the community of #illuminatesyourworld
General
- Dimensions LxWxH: 39,5cm x 39,5cm x 5cm
- Main material: Acrylic
- Ceiling rose material : Acrylic
- Color: Matt Gold / Brass and Opal
- Style: Modern
- Shape: Round
- Weight: 1,15kg
Specifications
- Dimmable: Yes
- Light direction: Around (Diffuse)
- Adjustable in height: Not In Height Adjustable
- Directional: Not Directional
- Cable: No Cable On the Product
- Sensor: Without Sensor
- Control: Light Switch Control
- Power supply: Adapter/ Power Grid
- IP-Class: 20
- Electric Class: 1
- Number of light sources: 1
- Lamp socket: Integrated LED
- Maximum wattage: 24W
- Power requirements: 220 -240 V~50 Hz
- Lumen: 1680 Lm
- Colour temperature: 270 0 K
- Color Rendering Index: 80
- Expected lifetime: 20 0 0 0 h
- Warranty: 3 Years
Dimensions
Installation
Safety Instructions
- Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct install-lation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service.
- Installation should always be done by a qualified electrician.
- Always isolate the power before commencing installation, maintenance, or repair.
- In case of doubts, please contact a qualified electrician.
- Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
- During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
- This is to avoid all risks.
- Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).
Explanation of the symbols that can appear on the fixture
This item is only suitable for indoor use, exclusive bathroom
(except if a higher IP degree permits that the item can be used in the
bathroom).
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment marked
with this symbol indicating separate collection of such equipment must be
returned to a municipal waste collection point.
Class I: The item has an earth connection. The earth wire (green-yellow)
needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the
earth wire.
Class III: The item is only suitable for lower voltage supply and must
not be connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced
immediately.
Please respect the minimum distance from the bulb to inflammable objects.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>