SkyGuard EPDM 8×8 Garden Building/Shed Roof Kit Instructions
- June 6, 2024
- SkyGuard
Table of Contents
SkyGuard EPDM 8×8 Garden Building/Shed Roof Kit Instructions
Assembly Instructions
-
Remove the old roof covering and any nails. Re-board if the roof is rotten or if the roofing felt wont come off cleanly
-
Relax the rubber membrane by laying it in position on the roof for 20 minutes. Fold membrane back to centre of roof for adhesive when ready.
-
Apply the adhesive working IN STAGES towards the edge of the roof. Roll membrane onto adhesive whilst wet. Re-apply more if necessary.
-
Apply a bead of edge sealant and press the membrane onto it. Once dried this will hold the membrane securely.
-
Re-install any existing timber barge boards to help secure the membrane perimeter. Replace if rotten.
-
Trim the membrane using a pair of scissors and the underside of the trim as a guide.
Find out more and watch the video at:
http://www.skyguard50.co.uk/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>