SkyGuard EPDM 8×8 Garden Building/Shed Roof Kit Instructions
- June 6, 2024
- SkyGuard
Table of Contents
EPDM 8×8 Garden Building/Shed Roof Kit
LONG LASTING | EASY TO FIT
Never replace your shed roof again!
Fitting Instructions for Shed Roofs
1
Remove the old roof covering and any nails. Re-board if the roof is rotten or
if the roofing felt wont come off cleanly.
4
Apply a bead of edge sealant and press the membrane onto it. Once dried this
will hold the membrane securely.
2
5
Relax the rubber membrane by laying it in position on the roof for 20 minutes. Fold membrane back to centre of roof for adhesive when ready.
Re-install any existing timber barge boards to help secure the membrane perimeter. Replace if rotten.
3
Apply the adhesive working IN STAGES towards the edge of the roof. Roll
membrane onto adhesive whilst wet. Re-apply more if necessary.
6
Trim the membrane using a pair of scissors and the underside of the trim as a
guide.
Find out more and watch the video at:
www.skyguard50.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>