Loyal 2.4G Bluetooth+Wireless Mouse User Manual

June 6, 2024
Loyal

Loyal 2.4G Bluetooth + Wireless Mouse User Manual

Loyal 2.4G Bluetooth+Wireless Mouse User Manual

Product Function

Loyal 2.4G Bluetooth+Wireless Mouse User Manual - Product
Function

  • (A) Left Button
  • (B) Right Button
  • (C) Scroll Wheel
  • (D) USB Indicator
  • (E) Bluetooth 1 Indicator
  • (F) Bluetooth 2 Indicator
  • (G) Mode Switch Button
  • (H) DPI Button
  • (I) DPI Indicator
  • (J) Battery Bay
  • (K) USB Receiver
  • (L) On/Off
  • (M) Forward Button
  • (N) Back Button

Note: Bluetooth indicator/USB indicator flashes quickly on low battery.

2.4G Connection

  1. Turn on the mouse.

  2. Remove the USB receiver.

  3. Insert the USB receiver into computer USB port.

  4. Press the mode switch to 2.4G mode until white LED is on.

Bluetooth Connection

Windows System (Take Windows 10 as an example)

  1. Turn on the mouse
  2. Press the toggle button until the white light flashes slowly.
  3. Press the toggle button for 3~5 seconds until the white light flashes quickly. The mouse will be at Bluetooth pairing mode this moment.
  4. Click the “Bluetooth devices “button in the computer.Loyal 2.4G Bluetooth+Wireless Mouse User Manual - Click the “Bluetooth devices”button in the computer
  5. Click the “Add or remove Bluetooth devices “button.Loyal 2.4G Bluetooth+Wireless Mouse User Manual - Click the “Add or remove Bluetooth devices”button
  6. Search the Bluetooth “BT 4.0+2.4G Mouse “,and click Pairing button.Loyal 2.4G Bluetooth+Wireless Mouse User Manual - Search the Bluetooth
  7. While the Bluetooth “BT 4.0+2.4G Mouse “is connected, the mouse can be used normally.Loyal 2.4G Bluetooth+Wireless Mouse User Manual - While the Bluetooth

Mac OS System
Please operate the Bluetooth installation steps(1~3)before pairing.

  1. Click the “system preferences “button on the Mac.Loyal 2.4G Bluetooth+Wireless Mouse User Manual - Click the “system preferences”button on the Mac
  2. Click the Bluetooth button on the system preference folder.Loyal 2.4G Bluetooth+Wireless Mouse User Manual - Click the Bluetooth button on the system
  3. Search the Bluetooth “BT 4.0+2.4G Mouse”, and click Pairing button. If installed completely, the mouse can be used normally.Loyal 2.4G Bluetooth+Wireless Mouse User Manual - Search the Bluetooth “BT 4.0+2.4G Mouse

Ways of Mode Switching

When Bluetooth and 2.4G connected successfully, shortly press the multi-mode toggle button, and you can switch the modes easily.
Loyal 2.4G Bluetooth+Wireless Mouse User Manual - Ways of Mode
Switching

Shortly press the multi-mode toggle button at the top of mouse.

Basic Parameters

Chip: Nordic NRF51822
Engine: Optics
Mouse Resolution:1000/1600/2400 dpi
Mouse Button Life: Over 3 million
Mouse Size:1096237mm
Mouse Weight:76g
2.4G Transmission Parameters:
Transmission distance:10m
Work voltage:1.5V
Work Currency:10.0±0.5mA
Rate of Return:250Hz
Bluetooth Transmission Parameters:
Transmission distance:10m
Work voltage:1.5V
Work Currency:6.0±0.5mA
Rate of Return:125Hz
System needs:
Bluetooth receiver device
USB interface Windows 8,Windows 10 or higher versions
Mac OS X 10.10 or higher version
Android 4.3 or higher versions

Package Include

  • 1x Wireless Mouse
  • 1x USB Receiver
  • 1x Manual

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals