OPPO Enco Free True Wireless Headset User Guide
- June 6, 2024
- OPPO
Table of Contents
OPPO Enco Free
True Wireless Headphones
Quick start guide
Overview
Bluetooth Pairing
- When using for the first time, open the Charging Case and the headphones will start pairing automatically.
- Turn on Bluetooth on your device:
- Normal Pairing: On the Bluetooth interface, search and select “OPPO Enco Free”.
- Quick Pairing: Hold near unlocked OPPO phone, then follow the onscreen instructions.
Not all models support the quick pairing. For details, please visit
www.oppo.com.
Automatic Connection
After the pairing record has been recorded, open the Charging Case, then the headphones will connect to your device automatically.
Pairing with Other Devices
With the headphones in the Charging Case and lid open, press and hold the Function Button until the Indicator blinks. The headphones then are available for pairing with a new device.
Replacing the Ear Tips
OPPO Enco Free True Wireless Headphones ore equipped with 3 types of Ear Tips (the Size S Ear Tips ore pre-installed and the headphones). Choose the right For Tips for the most comfortable feel.
Wearing Detection
When you listen to music while wearing both units of the headphones, the music playback will be paused if either of them is removed. When the removed unit is worn again, the music playback will be resumed.
Touch Control
Double tap to answered o call, or ploy/pause the track. Touch and hold to
activate voice assistant.
Whether case assistant is supported depends on a bond and model at Medevise.
Slide
Left headphone: Slide up/down to increase/decrease volume. Right headphone:
Slide up/down to play next/previous track.
Charging
Check charge status
- The Indicator shows the charge status of the headphones when they are in Charging Case. Otherwise, the Indicator shows the charge status of the Charging Cose.
- The indicator color indicates the battery level, red indicates low battery, yellow indicates medium power, and green indicates high battery.
- When the remaining battery charge of the Charging Cose is low (the indicator lights red), the Charge Dose can only complete one full charge of the headphones at most. Please charge the Charging Case In time.
Charge the headphones
The headphones charge while in the Charging Cose. If the device is left to It
isle lot bog periods. charge it every two months, the headphones may not work
properly.
Charge the Charging Case
Use the US8-C Coble to charge the Charging Case. The Indicator will light
up when charging.
Resetting
- With the headphones in the Charging Case and lid open.
- Press and hold the Function Button until! the Indicator flashes red three times. Then the headphones have been restored to factory settings.
Specifications
| Model | ETI02 |
|---|---|
| Driver | 13.4 mm dynamic driver |
| Frequency response range | 16 Hz – 20 kHz |
| Microphone sensitivity | -42 dBV/Pa |
| Supported audio formats | AAC/SBC |
| ‘Bluetooth version | 5.0 |
| Wireless range | 10m |
| Battery type | Rechargeable Lithium-ion battery |
| Battery capacity | 31 mAh (Headphones) |
410 mAh (Charging Case)
Music playtime (50% volume)| 5 h (single charge)
25 h (with Charging Case)
Charging time*| 70 min (Headphones) 110 min (Charging Case)
Charging Case model| ET103
Input (Charging Case)| 5 V 1 A
- Charging time was measured using a standard OPPO charger at 25°C, the normal lab temperature. The actual charging time may vary subject to the charging environment and the specific charger being used.
- Specifications are from lab data.
- This Quick Start Guide is for reference only. The specific functions and appearance of the headphones may be slightly different.
GUANGDONG OPPO MOBILE TELECOMMUNICATIONS CORP., LTD.
NO.18 HaiBin Road, Wusha Village, Chang An Town, DongGuan City, Guangdong,
China
0301000378 V1.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>