niceboy HIVE PINS 2 ANC User Manual
- June 6, 2024
- niceboy
Table of Contents
HIVE PINS 2 ANC
User Manual / Bluetooth Earphones
PRODUCT DESCRIPTION
- LED
- Multifunction button
- Charging pins
- LED charging indicator
- USB-C charging port
FIRST START-UP AND PAIRING
- Remove both earphones from the charging box and remove the stickers protecting the charging pins (3) on the earphones.
- Switch the earphones on by pressing and holding the multifunction button (2) on both earphones.
- The earphones will switch on and pair with each other. When the LED (1) starts flashing white and orange, the earphones are ready to connect to Bluetooth.
- Open the Bluetooth settings on your device and search for „Nice boy HIVE Pins 2 ANC“ on the list of available devices.
- Successful pairing is announced by an acoustic prompt and the LED (1) will start flashing white at long intervals.
When reconnecting to a device that has already been paired, simply remove the earphones from the box. They will switch on and connect to the device automatically.
SWITCHING ON AND OFF:
To switch the earphones on, simply remove them from the charging box, or
manually switch them on by pressing and holding both multifunction buttons.
To switch them off, simply insert the earphones into the charging box. They will turn themselves off and disconnect from your device. The earphones are stored correctly in the box when the LED (1) turns orange. When the earphones are fully charged, the LED goes out. To switch the earphones off, press and hold both multifunction buttons (2) for approx. 12 seconds.
MULTIFUNCTION BUTTON – BASIC OPERATION
Press any button once – play/pause, answer/hang up
Press and hold the right button – increase the volume, reject the call
Press and hold the left button – decrease the volume, reject the call
Press the right button twice – next song Press the left button twice –
previous song
Press any button three times – activate Siri / Google Assistant
Press any button four times – change mode in the following order: ANC on /
Ambient / ANC off
CHARGING:
To charge the box itself, connect the charging cable to the USB-C port (5).
During charging, the LED indicators (4) will start flashing; when fully
charged they will turn light blue.
FACTORY SETTINGS:
In case of technical problems, reset the earphones to the factory settings as
follows:
- Remove the earphones from the Bluetooth list on your device.
- Remove the earphones from the charging box.
- Switch both earphones off by pressing and holding the multifunction buttons (2) for approx. 12 seconds.
- Press and hold the multifunction buttons to switch both earphones on.
- Press both multifunction buttons four times simultaneously – the earphones will switch off.
- Insert both earphones into the charging box and wait until both LEDs (1) turn orange.
- Remove the earphones from the box. They will switch themselves on and pair with each other.
- The process is now finished and you can pair the earphones with your device again.
SPECIFICATIONS
| Bluetooth: | 5.0 |
|---|---|
| Bluetooth profiles: | A2DP, AVRCP, HSP, HFP, SPP |
| Supported codecs: | AAC, SBC |
| Degree of protection: | IPX5 |
| Transmission range: | 10 m |
| Speaker: | 8 mm |
| Impedance: | 32 Ω |
| Frequency range: | 20 Hz-20 kHz |
| Bluetooth frequency range: | 2.4 GHz-2.48 GHz |
| Sensitivity: | 101 ± 1 dB |
| Battery life (earphones): | up to 6 hours |
| Maximum battery life: | up to 24 hours |
| Earphones battery capacity: | 50 mAh |
| Charging box battery capacity: | 500 mAh |
| Voice assistants: | Siri and Google Assistant |
PACKAGE CONTENTS:
Nice boy HIVE Pins 2 ANC earphones
Charging box
Spare earbuds
USB-C cable
Manual
Importer to EU: RTB media s.r.o., Pretlucka 16,
Prague 10, 100 00, Czech Republic, ID: 294 16 876
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>