Babelio 26-43 Retractable Gate User Manual
- June 14, 2024
- Babelio
Table of Contents
Babelio 26-43 Retractable Gate
Product Information
The Retractable Gate is a safety gate designed to prevent children from accessing certain areas of your home. It can be installed at the bottom or top of stairs, doorways, or openings. The gate is retractable, allowing for easy access and storage when not in use.
Product Specifications
- Mounting: Hardware must be mounted into a stud in the wall
- Gate Swing : Must swing away from stairs when opening
- Maximum Floor to Bottom of Gate Spacing : 2.5 inches
- Minimum Floor to Bottom of Gate Spacing: 1 inch
Product Accessories
Your safety gate package includes the following
- A Wall Anchor
- B Mounting Screw
- C Wall Hinge
- D Lower Latch
- E Upper Latch
- F E-latch (not included in hardware package)
- G Gate Frame
- H Template
Installation Locations
The Retractable Gate can be installed in different locations
- Bottom of stairs: Install on the lowest stair to prevent children from climbing upstairs.
- Top of stairs: Install 6 inches back from the top step to prevent children from falling down the stairs.
- Doorways & Openings: Can be installed to restrict access to specific areas of your home.
Product Usage Instructions
Hardware Installation
- Use a tape measure to determine the opening width.
- Paste the template on the wall, ensuring the bottom of the template is close to the ground and perpendicular to the ground.
- Install the lower shaft with end “a” facing the ground and end “b” facing up.
- Install the upper shaft.
- Tighten the Q1 screw, ensuring the door frame is closed.
- Tighten the Q2 screw, keeping the door frame open.
- Unscrew the E-latch.
- Extend the door rail to the wall and determine the sticking position of D and E.
- Tear off the sticker.
- Paste D and E to the wall.
- Adjust the width of the door frame again, ensuring the distance between the handle and the upper latch is less than 0.078 inches, then lock the E-latch.
- Open the door frame and install the upper latch and lower latches.
Frequently Asked Questions (FAQ)
- Can I install the Retractable Gate on drywall without a stud?
- No, it is important to mount the gate hardware into a stud in the wall for proper stability and security.
- How do I adjust the width of the door frame?
- To adjust the width, follow step 11 in the installation instructions. Ensure the distance between the handle and the upper latch is less than 0.078 inches before locking the E-latch.
- Can I use the gate at the top of the stairs?
- Yes, the gate can be installed at the top of stairs. However, it should be placed at least 6 inches back from the leading edge of the top stairs to prevent accidents.
- How do I uninstall the gate?
- To uninstall the gate, remove the upper latch and lower latches, unscrew the Q1 and Q2 screws, and remove the gate frame from the wall. Fill any holes left by the hardware installation if necessary.
WARNING
- Mounting hardware must be mounted into a stud in the wall.
- If the door must be installed at the top of the stairs, the door should be at least 6 inches from the leading edge of the top stairs.
- Gate must swing away from stairs when opening.
Product and Accessories List
Your safety gate contains the following
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS
- A Wall Anchor
- B Mounting Screw
- C Wall Hinge
- D Lower Latch
- E Upper Latch
- F E-latch
- G Gate Frame
- H Template
Top View
Side View
Installation Location
-
Bottom of stairs
lf the gate is used at the bottom of the stairs, it must be placed on the lowest stair to prevent children from climbing upstairs. -
Top of stairs
lf the gate is used at the top of the stairs, it must be placed 15 cm (6 in) back from the top step to prevent children from falling down the stairs.
Doorway & Opening
NOTE: The maximum spacing from the floor to bottom of gate is 2.5″, the minimum spacing is 1″
Front View
Hardware Installation
-
- Paste template
NOTE : The bottom of the template must be close to the ground and kept perpendicular to the ground
- Paste template
-
Install the lower shaft
NOTE : When installing the lower shaft, please keep the b end facing up and the a end facing the ground -
Install the upper shaft
-
Tighten the Q1 screw
NOTE : Keep the door frame closed when tightening the Q1 screw -
Tighten the Q2 screw
NOTE : Keep the door frame open while tightening the Q2 screw -
Unscrew the E-latch
-
Extend the door rail to the wall and determine the sticking position of D and E
-
Tear off the sticker
-
Paste D and E to the wall
-
Adjust the width of the door frame again, so that the distance between the handle and the upper latch is less than 0.078in, and then lock the E- latch
-
Open the door frame, install the upper latch and lower latches
WARNING
Children have died or been seriously injured when gates are not securely
installed.
- ALWAYS install and use gate as directed using all required parts.
- Install according to manufacturer’s instructions.
- STOP using when a child can climb over or dislodge the gate.
- Use only with locking/latching mechanism securely engaged.
- NEVER use a gate to keep child away from pool.
- To prevent a hide ver used top of stairs without wall mounting cups and door stopper.
- Always close and lock gate behind you.
- This product will not necessarily prevent all accident.
- Do not use if any components are missing or damaged.
- Intended for use with children from 6 months-24 months.
- Adult assembly required.
- Exercise care when unpacking and assembling product.
- Install with this side AWAY from child.
UK REPT 27 Old Gloucester Street London, WCIN 3AX, UK
- Manufacturer: Hong Kong Lute Technology Co., Limited
- Address: Room 02, 21/F, Hip Kwan Commercial Building, 38
- Pitt Street, Yau Ma Tei, Kowloon, Hongkong
- E-mail : support@babeliobaby.com
- Product Name : Baby Safety Gate
- Model Number : CB-M-101
- Date code : 2022-10
US Importer
- Company: PACIFIC FORTUNE MANAGEMENT INC
- Address : 145 E Duarte RD Suite AA 198 Arcadia CA 91006
- Telephone : 213-820-0156
EC REP Prolinx GmbH Brehmstr. 56, 40239 Duesseldorf Germany
- MADE IN CHINA.
- HECHO EN CHINA.
- FABRIQUE EN CHINE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>