ARVOMIC ARMX777 Professional Audio Mixer 14-Channel Owner’s Manual

ARVOMIC ARMX777 Professional Audio Mixer 14-Channel

SYSTEM OVERVIEW

The ARMX777 14-Channel Console Controller Mixer with Audio USB Interface allows you to effortlessly achieve excellent quality sound with its 3-band EQ function and provides total dynamic control for the ultimate in punch and clarity. The +48V Phantom Power Switch allows the mixer to connect to laptops, computers, sound equipment, and studio condenser mics. With its USB function, you can stream audio in wirelessly, making it an ideal choice for setting up your own home recording studio.

USING THIS MANUAL

This booklet provides information regarding the use of the ARMX777 audio mixer. It includes a description of features and a step-by-step guide to operate this unit. The manual should answer any questions you may have about the operation and please keep this for future reference.

BOX CONTENT

• 1 x ARMX777 Audio Mixer
• 1 x Power Adapter
• 1 x User Manual

CONTROL ELEMENT AND CONNECTOR

1. BALANCED INPUT (MIC)
   Electronically balanced input for XLR connector

2. INSERT
   Channel mixed input

3. LINE INPUT
   Unbalanced input for mic or unbalanced high impedance input signal

4. HIGH EQ
   High range EQ control for up to 1 SD of boost or cut at 12KHz and above. Use it to add sizzle to cymbals, add an overall sense of transparency or edge to keyboard,vocals,and guitar

5. GAIN
   Adjust the input signal level

6. PAN
   The pan control sends continuously variable amounts of the post fader signal to either the left or right busses, In the center position equal amounts of signal are to the left and right busses.

7. MID EQ
   Mid range EQ control for up to 12 dB of boost or cut centered at 2.SKHz.Midrange EQ is often thought of as the most dynamics because the frequencies that define any particular sound are almost always found in this range. You can create useful EQ changer by using this knob to adjust sound

8. LOWEQ
   Low range EQ control up to 15dB boost or cut at 80Hz and below This frequency the punch in bass drums and bass guitar

9. CHANNEL FADER
   Adjust the volume of signal connection into each channel and adjust the volume of output, together with mater fader. Normal position is at the “O” mark.

10. AUX OUTPUT CONTROL

11. EFF
    Reverberation effect control

12. PEAK
    A red LED light indicates the signal level and lights up when the signal is above 5dB

13. AUXSEND

14. AUDIO OUTPUT

15. EFFECT SEND

16. MAIN OUTPUT JACK

17. HEADPHONE JACK
    You can monitor the sound condition 0through headphone

18. USB PLAYER
    Refer to next section for detailed description

19. LEFT/RIGHT STEREO INPUT

20. PHANTOM POWER SWITCH
    Press this button when the phantom power supply is switched on. The phantom power supply is necessary for condenser microphones and is activated when using the Mic/Line input jack

21. OUTPUT LEVEL INDICATOR
    Level meter to show the output level of left/right channel

22. DELAY
    Adjust the time interval of echo repeat. NOTE: The middle position might be most effective

23. REPEAT
    Adjust the frequency of echo repeat. NOTE: Too much echo repeat might cause a howl, please adjust properly

24. HEADPHONE VOLUME
    Adjust the volume of signal sent to headphone for sound monitoring

25. AUXSEND
    Auxiliary output volume adjustment

26. EFFECTS SEND
    Reverberation level adjustment

27. OUTPUT MAIN FADERS (LEFT/RIGHT)
    This is s master fader for adjustment for volume of right left output.

28. POWER CONNECTION
    Only use the power adapter that comes with the mixer, or a factory-authorized power supply.

CONTROL ELEMENT AND CONNECTOR

1. LCD DISPLAY
   LCD display. Menu options: Bluetooth, Recording, Music, PC sound card

2. USB PORT

3. FORWARD BUTTON
   Short press to select previous song or long press to decrease volume

4. PLAY BUTTON
   Short press to stop the music.

5. MODE/BT BUTTON
   This is a menu button to select different modes and functions. Short press to select Bluetooth mode and recording mode

6. FORWARD BUTTON
   Short press to select next song or long press to increase volume

SPECIFICATIONS

MIC INPUT
Type: XLR, electe. balanced
Frequency response: 10Hz to 60KHz
Gain range: +12 to +60 dB
Max. input level: +15dBu
Signal-to-noise ratio:- 90dB A-weighted
Impedance approx: 4.8kO balanced

LINE IN
Type:1/4″ TRS connector, electronically balanced
Impedance approx, 20kO balanced 1 0kO unbalanced
Gain range : -10 dB to +40 dB
Max. input level: +22dBu

EQ
High : 12KHz ± 15dB
Mid: 2.5KHz ± 15dB
Low : 60KHz ± 15dB

STEREO INPUTS
Type: 1/4″ TRS connector, electronically balanced
Impedance approx, 20kO balanced 1 0kO unbalanced
Gain range: -10 dB to +40 dB
Max. input level: +22dBu

MAIN OUT
Max. output level: +18 dBu

TAPE OUT
Type: RCA connectors, unbalanced
Impedance approx.1 koi
Max. output level: +18 dBu

PHONES
Type:1/4″ TRS connector
Max. output level:+18 dBu / 150O(316mW)
Distortion (THD+N):0.08%,A-weighted
Power consumption : 15watte

TWELVE-MONTH LIMITED WARRANTY

ARVOMIC®warrants to the original consumer purchaser that the above unit if free from any defects in material or workmanship for a period of six months from the date of original retail purchase. If any such defect is discovered within the warranty period, ARVOMIC® will repair or replace the unit free of charge, subject to verification of the defect or malfunction upon return to ARVOMIC®.

To the extent permitted by law, any applicable implied warranties, including warranties of merchantability and fitness are hereby limited to six months from the date of purchase. Consequential or incidental damages resulting from a breach pf any applicable express or implied warranties are hereby excluded. This warranty is in lieu of all other agreements and warranties, general or special, express or implied and no representative or person including an ARVOMIC ®dealer, agent, or employee is authorized to assume for us any other liability in connection with the sale or use of this ARVOMIC® product.

Whereas some states do not allow limitations on how long implied warranties last, and do not allow exclusion of incidental or consequential damages, the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

This warranty is subject to the following conditions:

1. This system must have been purchased from an authorized ARVOMIC  ®dealer.
2. Items not covered: physical damage resulting from improper handling of the unit in transit from the factory by the shipper; defects caused by normal wear of the product (expendable parts are typically connectors, cables, potentiometers, switches and similar components); damage or defects caused by abuse, neglect, accident, failure to connect or operate the unit in any way that does not comply with applicable technical or safety regulations, or improper repair, excessive hear or humidity, alteration or unreasonable use of the unit, causing cracks, broken cases/housings or parts; damage caused by leaking batteries; finish or appearance items.

How to obtain service:
Please contact us at arvoaudio@hotmail.com with any questions or concerns about your products or concerns about your product and a ARVOMIC® representative will contact you to provide assistance. If you purchased this system through Amazon, you can also contact customer service through Amazon message center.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>