TURTLE BEACH STEALTH 600 GEN 2 User Guide
- June 6, 2024
- TURTLE BEACH
Table of Contents
QUICK START GUIDE
IMPORTANT
READ BEFORE USING
Any questions?
turtlebeach.com/support
Model: Stealth™600 Gen 2 para
IMPORTANT
PLEASE MAKE SURE YOUR HEADSET IS UPDATED WITH THE LATEST FIRMWARE.
Connect to the Turtle Beach Audio Hub for Windows or Mac ® to update the firmware.
https://es.turtlebeach.com/pages/audio-hub
CONTENTS
A Stealth™ 600 Gen 2 Headset
B USB-C Charging Cable HEADSET CONTROLS
Use Superhuman Hearing®Mode to pinpoint quiet audio cues like enemy footsteps
and weapon reloads.
During gameplay, you can activate and deactivate Superhuman Hearing®by
pressing the POWER button once, quickly.
Microphone Mute
Flip-up mic to mute. There is an audible tone when the mic is muted or
unmuted.
EQ PRESETS
Signature Sound
Bass Boost
Bass + Treble Boost
Vocal Boost
SETUP FOR XBOX
For new Xbox console-setup instructions, go to:
COMPATIBLE WITH
Xbox Series X
Xbox One
Windows 10 with Xbox Adapter, sold separately
SURROUND SOUND FOR XBOX (ONLY AVAILABLE ON XBOX)
- Go to Settings > General > Volume & Audio Output
- Set Headset Audio to Windows Sonic for Headphones
For updated setup instructions visit:
turtlebeach.com/sonic
CHARGING
The Stealth™600 Gen 2 gives you 15 hours of rechargeable battery life. Make sure to charge it regularly before storing it.
Headset Storage
Always charge your headset before storing it for an extended period of time
(greater than 3 months). Never store the unit in temperatures above
113°F/45°C.
HEADSET LED
| HEADSET LED | MEANING |
|---|---|
| Solid Green | Headset and Console Paired |
| Breathing Green | (While Charging) Battery Full |
| Double-Blink Green | Not Paired |
| Solid Red | (While Charging) Battery Charging |
| Breathing Red | Battery Low |
SETUP FORPC USE
*SYNCING YOUR HEADSET (XBOX WIRELESS ADAPTER)
**
*Xbox Wireless Adapter not included
Headset volume is controlled through Windows 10 when used on a PC. Volume controls on the headset have no effect.
SYNCING YOUR HEADSET BUILT-IN XBOX WIRELESS)
-
On your PC, go to Settings > Devices > Connected Devices.
a. Choose to Add a device. Windows search for the headset. -
Press the connect button on your headset. Windows finds and adds the headset.
-
When your Stealth™ 600 headset appears in the list under Other devices, it is ready to use.
-
Configuring your settings > On the Windows Taskbar, right-click the Speaker Icon, Select Playback Devices
a. Set TURTLE BEACH Stealth 600 ™ as your default device.
b. Select Recording Devices, Set TURTLE BEACH Stealth 600 ™as your default device.
Regulatory Compliance Statements for the Stealth™600X Gen 2
Local Restrictions on 802.11a, 802.11b, 802.11g and 802.11n Radio Usage
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b,
802.11g, and 802.11n wireless LAN devices may not yet be harmonized in all
countries, 802.11a, 802.11b, 802.11g, and 802.11n products are designed for
use only in specific countries, and are not allowed to be operated in
countries other than those of designated use. As a user of these products, you
are responsible for ensuring that the products are used only in the countries
for which they were intended and for verifying that they are configured with
the correct selection of frequency and channel for the country of use. Any
deviation from the permissible power and frequency settings for the country of
use is an infringement of national law and may be punished as such.
To determine whether you are allowed to use your wireless network device in a
specific country, please check to see if the radio type number that is printed
on the identification label of your device is listed in the manufacturer’s OEM
Regulatory Guidance document at the following URL:
http://www.turtlebeach.com/homologation or contact Turtle Beach directly.
Federal Communications Commission (FCC) Compliance Notices
This section includes the following FCC statements for the Stealth™600X Gen 2:
- FCC ID: XGB-TB2315
- Class B Interference Statement
- RF Radiation Exposure & Hazard Warning
- Non-Modification Statement
- Unlicensed National Information Infrastructure Bands Operation Statement
Class B Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
his device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Radiation Exposure & Hazard Statement
To ensure compliance with FCC RF exposure requirements, this device must be
installed in a location such that the antenna of the device will be greater
than 2 cm (0.8 in.) from all persons. Using higher gain antennas and types of
antennas not covered under the FCC certification of this product is not
allowed. Installers of the radio and end-users of the product must adhere to
the installation instructions provided in this manual. This transmitter must
not be co-located or operated in conjunction with any other antenna or
transmitter.
Non-Modification Statement
Use only the supplied internal antenna. Unauthorized antennas, modifications,
or attachments could damage the Stealth™ 600X Gen 2 and violate FCC
regulations. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. Please contact Turtle Beach for a list of approved 2.4 GHz and 5.0
GHz antennas.
Unlicensed National Information Infrastructure (U-NII) Bands Operation
Statement
Within the 5.25-5.35 GHz band, U-NII devices will be restricted to indoor
operations to reduce any potential for harmful interference to co-channel MSS
operations.
The U-NII devices shall accept any interference from legal communications and
shall not interfere with the legal communications. If interference is caused,
the user must stop operating the device immediately and cannot resume
operation until the harmful interference is clear.
Manufacturers of U-NII devices are responsible for ensuring frequency
stability such that emission is maintained within the band of operation under
all conditions of normal operation as specified in this user manual.
Dynamic Frequency Selection (DFS)
U-NII devices operating in the 5.25-5.35 GHz and 5.47-5.725 GHz bands shall
employ a DFS radar detection mechanism to detect the presence of radar systems
and to avoid co-channel operation with radar systems in order to reduce the
likelihood of interference to radar.
The modification of wireless broadband and other transceiver devices to
operate on unauthorized frequencies or the disabling of DFS capabilities is a
violation of FCC rules and may result in unlawful interference to radio
communications services critical to public safety This product is compliant
with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314
(CPSIA)
Canadian ICES Statements IC: 3879A-2315 (Stealth™600X Gen 2)
This device complies with ICES-003 and RSS-247 of Industry Canada. Operation
is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing and not supported by Stealth™ 600X Gen 2 Models.
RF Radiation Exposure & Hazard Statement
To ensure compliance with RSS-102 RF exposure requirements, this device must
be installed in a location such that the antenna of the device will be greater
than 2 cm (0.8 in.) away from all persons. Using higher gain antennas and
types of antennas not covered under the IC certification of this product is
not allowed. Installers of the radio and end-users of the product must adhere
to the installation instructions provided in this manual. This transmitter
must not be co-located or operated in conjunction with any other antenna or
transmitter.
Deployment Statement
This product is certified for indoor deployment only in the 5150-5250 MHz
band. Do not install or use this product outdoors in that frequency band in
Canada.
Operation in the Frequency Bands 5470-5725-MHz and 5725-5850-MHz
Until further notice, devices subject to this section shall not be capable
of transmitting in the band from 5600-5650-MHz. This restriction is for the
protection of Environment Canada’s weather radars operating in this band.
Users are advised that high-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these
radars could cause interference and/or damage to LE-LAN devices.
European Union and European Fair Trade Association Regulatory Compliance
This equipment may be operated in the countries that comprise the member
countries of the European Union and the European Fair Trade Association. These
countries, listed below, are referred to as The European Community throughout
this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND,
FRANCE,, GERMANY, GREECE, HUNGARY,
IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND,
PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND,
LICHTENSTEIN, NORWAY, SWITZERLAND
Declaration of Conformity
Marking by this symbol:
indicates compliance with the Essential Requirements of the Radio Equipment
Directive (RED) of the European Union (2014/53/EU). This equipment meets the
following conformance standards:
Safety: EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013
(T-Mark License),
EN 62368-1: 2014 + A11 (T-Mark License),
EN 50332-1: 2013, EN 50332-2: 2013, EN 71-3: 2013
Additional licenses issued for specific countries available on request
EMC:
EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2016-11)
EN 61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010, EN 61000-4-8:
2010
The products are licensed, as required, for additional country-specific
standards for the International Marketplace. Additional issued licenses are
available upon request.
Radio: EN 300 328 V2.1.2 (2019-07), EN 301 893 V2.1.1 (2017-05)
SAR: EN 62311: 2008
Environmental: RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE
2012/19/EU, REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC, Toys
Safety Directive 2009/48/EC
Warning! This is a Class B product. In a domestic environment, this
product may cause radio interference, in which case, the user may be required
to take appropriate measures.
National Restrictions
Indoor Operation The Stealth™600X Gen 2 operates in the 5150 to 5350 MHz
frequency band and is restricted to indoor use only! Antenna The Stealth™
600X Gen 2 has integrated antennas that cannot be replaced.
Power Level Control The Stealth™600X Gen 2 does not allow for customized
power level control.
Operating Frequency The operating frequency of the Stealth™600X Gen 2 is
determined by the host console system. As such, it is important that the host
console system is correctly configured to meet the local regulations.
This symbol on the product or its packaging indicates that this product must
not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to the
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste for
recycling, please contact your local authority, or where you purchased your
product.
Turtle Beach Europe Ltd is obligated as a producer with a main activity of
selling under The Producer Responsibility Obligations (Packaging Waste)
Regulations 2007. To fulfill our obligation we are registered with Comply
Direct and their Recycling Room. Here you will find advice and information on
packaging waste management, recycling symbols, and the waste hierarchy
principles of reducing, reusing, and recycling.
https://www.complydirect.com/the-recycling-room/
Please visit the following URL for a complete copy of the Declaration of
Conformity: http://www.turtlebeach.com/homologation
Mexican IFT-008 Compliance Statement
To access the rating label:
-
Remove the left ear pad by pulling the ear pad straight up using your thumb.
-
Once you’ve released the cloth from the lip on top, pull the earpad straight back and it should slip right off. To replace the ear pad, follow the same process in reverse.
Not seeing what you’re looking for here?
Visit turtlebeach.com/support for the latest Tech Support information.
References
- Turtle Beach Support
- Turtle Beach® Audio Hub - Download Firmware Updates for PC & Mac
- Windows Sonic & Dolby Atmos Compatible Headphones – Turtle Beach®
- Turtle Beach Support
- Turtle Beach Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>