niceboy HIVE 3 PRODIGY Wireless Headphone User Manual
- June 6, 2024
- niceboy
Table of Contents
niceboy HIVE 3 PRODIGY Wireless Headphone
PACKAGE CONTENTS
- Wireless headphones
- Charging USB-C
- Audio cable jack 3.5 mm -> USB-C
- Directions for use
PRODUCT DESCRIPTION
- LED indicator
- Increase volume/Next track
- Multifunctional button
- Decrease volume/Last track
- Charging micro USB port / AUX input
- Microphone
POWERING ON THE HEADPHONES AND CONNECTING TO BLUETOOTH
- Press and hold the multifunctional button (3) until the LED indicator (1) starts to flash blue-red and the audio signal has sounded. The headphones are now in pairing mode.
- Activate Bluetooth on your device and select “Niceboy HIVE 3 prodigy” from the list of available devices. Your device will connect to the headphones. Once the pairing is successful, it will be announced by an audible queue and the LED indicator will begin to flash blue slowly.
Note:
The headphones automatically connect to the device they were last connected
to.
For the purpose of saving the battery, the headphones automatically power off
after 4 minutes after having the last connection to your device of if they are
not connected to any device.
POWERING OFF THE HEADPHONES
To power off the headphones, press and hold the multifunctional button (3)
until the audio signal sounds, and the LED indicator (1) begins to shine red.
MUSIC CONTROLS
Playback/pause: short press the multifunctional button. (3)
Next track: long press the “+” button. (2)
Last track: long press the “-” button. (4)
Decrease volume: short press the “+” button. (2)
Increase volume: short press the “-” button. (4)
TELEPHONE CONVERSATIONS
To accept or end phone calls, short press the multifunctional button. Press
the multifunctional button for about 3 seconds to reject an incoming call.
Note: Some phones have calls preferentially set to their own microphone and
headphones. In such a case, change the selection according to the instructions
on your mobile phone.
SIRI AND GOOGLE NOW
Activate in the emergency mode or when playing music by pressing the
multifunctional button twice.
CHARGING AND BATTERY INFORMATION
We recommend fully charging the battery before the headphones are first used.
Use the enclosed USB-C cable to charge the headphones. The charging voltage
and electrical current is 5V/1A.
Charge the headphones if the LED indicator (1) starts to shine red. An audio
signal will alert you when only several minutes of use remain. A complete
charge of the battery takes approx. 2 hours.
SAFETY INFORMATION
Listening to music on above-average volume can damage your hearing. Do not expose the headphones to liquids or moisture. Do not expose the headphones to extremely high/low temperatures and do not attempt to take the headphones apart. Keep the headphones away from sharp objects and falling from high places.
SPECIFICATIONS
Bluetooth version: 5.0
Supported Bluetooth profiles: A2DP, AVRCP, HFP, SBC, AAC
Frequency: 20Hz – 20kHz
Sensitivity: 97+/-3dB
Playback period: up to 32 hours (on 70% volume)
Conversation period: up to 32 hours
Range: up to 10 m
Battery: 380mAh
Speaker: 40mm
Charging period: 2 hours